Reviews Npt Thread

NPT Thread Forming Taps - 5 Pieces 1/8 1/4 3/8 1/2 3/4 Pipe Taps Set with Storage Box Drill Bits for Cleaning or Re-thread Damaged or Jam Pipe Threads High-speed Steel Material

  • High quality materials: If you need to clean or re-thread damaged or jammed pipe threads, look no further than our NPT Thread Forming Taps. This 5-piece set includes 1/8", 1/4", 3/8", 1/2", and 3/4" pipe taps, each made of high-speed steel material for durability and long-lasting use. Our taps are forged from composite steel (GCR15) material, hardened to a higher hardness (traditional 45# carbon steel hardness is 44.
  • 5 pcs NPT Pipe taps used for clean and or re-thread damaged or jam pipe threads, Cuts internal threads in pipes. It is used for the repair of rusted, broken and slippery threads of water pipe joints. They are available in National Pipe Taper (NPT) and British Standard Pipe Taper (BSP) and come in the following sizes: 1/8" - 27 npt, 1/4" - 18 npt, 3/8" - 18 npt, 1/2" - 14 npt, and 3/4" - 14 npt..
  • Nominal size of the tap is that of the pipe fitting being tapped. Our pipe taps feature a square universal chuck that can be used with either a manual wire twister or a tap machine, making them convenient and fast to use. The round shank with square end and straight flute tools allow chips to collect in the flutes as they cut, making them well-suited for most applications in shallow cuts..
Check Stock

GASHER 4PCS Metals Brass Pipe Fitting Hex Nipple Brass Tone 1/4 x 1/4 NPT Male Thread Pipe 1/4Inch x 1/4Inch NPT Female Thread Pipe

  • 1/4"Female NPT thread parts on both ends for connecting 1/4" Male NPT thread parts together,1/4" Male NPT threads for connecting to Female threaded....
  • Male and Female National Pipe Taper (NPT) threads for connecting two pipes.
  • The kit include: 2pcs x 1/4" x 1/4" NPT Male Nipple.
  • Durable solid brass construction is resistant to corrosion and long-lasting. Operating temperature range of -65 to +250 degrees F..
Check Stock

Fitvell Stainless Steel Bulkhead Fitting 1/4 NPT Female Bulked Coupler Thru-bulk Tank Fitting Connector pack of 2

  • Size: 1/4" npt full female to 1/2" BSP male.
  • Thread outside dimension: 0.825 inch(20.96mm).
  • NPT thread has a taper and won’t screw thread to the end..
  • Material: made of 304 stainless steel for high strength and resistance to corrosion. Long service life..
  • Temperature & Pressure: -868 to 1472 degrees F/-500 to 800 degrees C for temperature range.
  • Application: this female coupler is applied for connecting 1/4” NPT fittings through a bulkhead..
  • Attn: Please make sure you’ve choose the right size before order..
Check Stock

AC PERFORMANCE Aluminum 3 Ways 1/8 NPT Female Thread Pipe Tee Converter Tube Hose Fitting Adapters Black

  • Size: 1/8" NPT female thread 3 way T shape equal hose tee, 1/8" NPT to 1/8" NPT coupling adapters.
  • Manufactured of high performance lightweight 6061-T6 cnc machined billet aluminum.
  • Surface treatment: black anodized finish for durability and strength.
  • Allows you to connect three lines, or add a branch to a line. Precision machined to exacting tolerances for trouble-free performance.
  • Tee style adaptor has three openings-- the "run" across the top is 1/8" female pipe thread on each end, and the "branch" is 1/8" female pipe thread as well.
Check Stock

Qolekog Quality 2 Way 4 Port Air Manifold 1\\/2 NPT Supply Port 1\\/4 NPT Outport With Mounting Hole Aluminum Silver 1Pcs

  • ➤Air manifold for distributing pneumatic power to multiple locations.
  • ➤Pressure resistant and well sealed.Max Work Pressure reach 450Psi.
  • ➤All standard NPT thread.Easy to install and reuse..
  • ➤It is applicable to the branch outlet of air compressor or gas storage equipment,with certain structural strength, it can be used as structural member of equipment..
Check Stock

2 Pack G 1/2 BSP Female Thread to US 1/2 NPT Male Thread Pipe Fitting,Brass Pipe Fitting Adapter,G to NPT Adapter 1/2 Inch

  • Size: 1/2 inch G thread (metric BSP) female thread to 1/2 inch NPT (standard pipe thread) male thread. G thread can fit BSP,NPS and G thread.
  • Sturdy material: made of high-quality brass, sturdy and corrosion-resistant.
  • Leak-proof design: the adapter is equipped with a rubber gasket to prevent leakage.
  • Please note: G thread (BSP) and NPT thread are two different threads, please purchase after confirmation..
Check Stock

#52CSU HANDLER - Etcher Catcher w/filter and self contained dust colle 103389 Us Dental Depot

  • Table adjustable pressure regulator range 0-11BAR (British unit of 0-160PSI).
  • Air inlet thread -1 / 4NPT taper of the thread, the thread connecting the lance -1 / 4NPT internal thread..
  • Can be used with the gun, achieve the display, adjust and control the pressure,.
  • It is the best partner upscale gun. Compact, flexible adjustment and light weight.
Check Stock

Anderson Metals 56120-0806 Brass Pipe Fitting, Adapter, 3/8' Male Pipe x 1/2' Female Pipe

  • Adapter for connecting pipes or fittings of different types.
  • Male National Pipe Taper (NPT) threads on one end and female NPT threads on the other for connecting pipes with different ends. Please see NPT Thread - chart to determine the correct size required. Pipe Size and actual Thread OD are different. The Thread OD is larger than the Pipe Size..
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
  • Operating temperatures range from -53 to 121 degrees C (-65 to 250 degrees F).
  • Meets specifications ASTM B584 and ASME/ANSI B16 for quality assurance.
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..
Check Stock

EVIL ENERGY 6AN Male Flare to 3/8' NPT Pipe Fitting Adapter Aluminum Straight Black

  • Size: AN6 to 3/8 NPT,the thread size of 6AN is 9/16-18UNF..
  • Material: Made of aluminum alloy 6061-T6, anodized black surface..
  • Sealing:The AN side of the flare is sealed by a 37 degree angle and the NPT thread side is sealed by a 60 degree tapered threads.(To ensure no leakage at the NPT end, sealant or PTFE (polytetrafluoroethylene tape) is strongly recommended.).
  • 3/8 NPT to 6an fitting can be used with various engine oils, water, air, alcohol, coolant, E85, methanol, transmission oil, etc..
  • EVIL ENERGY provide this product 3-month warranty. Any problem you might have, please feel free to contact us via Amazon message..
Check Stock

uxcell Spiral Point Plug Threading Tap M8 x 1.25 Thread, Ground Threads H2 3 Flutes, High Speed Steel HSS 6542, Titanium Coated, Round Shank with Square End

  • Different from the traditional carbon steel material. Our pipe taps is made of composite steel (GCR15) material, which is more durable and Higher hardness, (The traditional hardness of 45# carbon steel is 44.
  • the hardness of combined steel is 61), uses forclean and or re-thread damaged or jam pipe threads..
  • 5 pcs NPT Pipe taps used for clean and or re-thread damaged or jam pipe threads, Cuts internal threads in pipes. Ideal for pipe fittings.Available in National Pipe Taper (NPT) and British Standard Pipe Taper (BSP). Includes teach size of: 1/8" - 27 npt, 1/4" - 18 npt, 3/8" - 18 npt, 1/2" - 14 npt, 3/4" - 14 npt..
  • Nominal size of the tap is that of the pipe fitting being tapped..
  • Uncoated tools feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications..
  • Round shank with square end, Straight flute tools allow chips to collect in the flutes as they cut and are well suited for most applications in shallow cuts..
Check Stock