Reviews Non ferrous Metal Castings

WORKPRO 276-piece Rotary Tool Accessories Kit Universal Fitment for Easy Cutting, Carving and Polishing

  • This kit includes complete rotary tool accessories of cutting, grinding, sanding, sharpening, polishing, engraving, drilling, cleaning, meet your various DIY application requirements.
  • All purpose accessory for cutting, grinding, sanding, carving and polishing on variety of materials.
  • Suitable for most ferrous and non-ferrous metals, castings, welded joint. Accessories for fine detail work on jade, ceramic, glass, wood, hardened steel, cast iron, stainless.
  • Shank Diameter: 1/8-inch, universal fitment for use on all major brands.
  • Reusable storage case for easy storage and carrying.
Check Stock

AuInn 72 PCS Wire Wheel Brushes Kit Steel Wire Wheels Pen Brushes Set for Rotary Tools Polish Clean Tools

  • 【Applications】: This Wire Wheel Brushes Set is usually used for metal surface cleaning, derusting, grinding, dusting, deburring, polishing, stripping residue, Remove burrs, rust, dust, removing the oxide layer on surface like ferrous and non-ferrous metals, castings, welded joints, rivets, rust, stone, glass..
  • 【Quality Material】: Use Brass and stainless steel as raw materials, the wire brush set is corrosion-resistant, not easy to rust. Having a long service life..
  • 【Package Contents】: 12 PCS Brass Pencil Wire Brush, 12 PCS Stainless Steel Pencil Wire Brush, 12 PCS Brass Wire Wheel Brush, 12 PCS Stainless Steel Wire Wheel Brush, 12 PCS Brass Cup Wire Wheel Brush, 12 PCS Stainless Steel Cup Wire Wheel Brush..
  • 【Using】: Fit your hand drill, drill press, and foredom tool.(Shank Diameter 2.9 mm. Do not run in excess of 15,000 RPM.) Please make sure you wear a good pair of safety glasses and other Protective equipment before using the wire brush set!.
  • 【Note】: Please feel free to contact us if you meet any problems during use. We would try our best to solve any problem for you..
Check Stock

Freud LU77M010 10-Inch 80 Tooth TCG Thin Kerf Non-Ferrous Metal Cutting Saw Blade with 5/8-Inch Arbor

  • TCG Thin Kerf Non-Ferrous Metal Cutting Saw Blade.
Check Stock

Metal Detector X10 Pro with 9*5\ Coil Waterproof Light Weight Easy to Use Loud Speaker Built-in Rechargeable Battery Perfect for Beginners

  • DETECTION OF 3 TYPES OF METALS: MMD02 provides 3 detection to detect 3 types of different metals, for the 3 different types it will emit the 3 different sounds: a low tone alarm sound for ferrous metals, a medium tone alarm sound for low conductivity non-ferrous metals, and a high-tone alarm sound for high conductivity non-ferrous metals..
  • FANTASTIC DISC BUTTON: By pressing the DISC button of MMD02, you can easily detect certain types of metals: once for ferrous metals, twice to exclude even low conductivity non-ferrous metals, three times to return to normal detection. MMD02 helps to find metal faster, also thanks to the deep detection function. Depending on the depth, different icons will appear on the MMD02 display..
  • FUN FOR EVERYONE: The detection rod of MMD02 can be freely adjusted in length from 61cm to 90cm. Not only is it usable by adults, but it also provides the joy of treasure hunting for kids. The non-slip strip equipped with MMD02 makes it more convenient to carry. The waterproof coil also offers another detection possibility, namely shallow water detection. ? Notice: The detection rod and coil are waterproof, but the detector is not..
  • DETECTION OF 3 TYPES OF METALS: MMD02 provides 3 detection to detect 3 types of different metals, for the ....
Check Stock

Electric Rotary Tool Kit SPTA Mini Electric Grinder Set Mini Handle Electric Drill Grinding Engraving Pen Milling Trimming Polishing Drilling Cutting Engraving Tool 33Pcs Kit

  • ✔ 【VARIETY OF ACCESSORIES】33 pieces package includes 1x rotary tool, 3x wool felt grinding heads, 2x diamond coated burr head, 3x sanding bands,....
  • ✔ 【6 SPEEDS ADJUSTMENT】 One button to switch rotation speed from 7,000 to 14,000rpm, which let you set and adjust speed flexibly according to....
  • ✔ 【LIGHTWEIGHT & HOLD ONE-HANDED】 This rotary tool weighs about 0.035 lb. It held like a pen for precision work, held like a hammer for rough....
  • ✔ 【WITH 33PCS ROTARY TOOLS ACCESSORIES】Suitable for most ferrous and non-ferrous metals, castings, welded joints, rivets, rust, stone, glass,....
  • ✔ 【WIDE APPLICATION】 Mini rotary tool can be used to cut, grind, grind, carve, polish, engrave, grind, drill, or smooth workpieces for any home....
Check Stock

OKDIAMOND Diamond Cutting Wheel 6 x 7/8 Inch for Metal, Cut Off Wheel with 3000+ Cuts on Rebar, Steel, Iron and INOX, for Angle Grinder-6 inch

  • All in 1 Metal Solution - 4.5 diamond blades for grinder for metal diamond plate cutting wheel，Angle grinder cutting wheel ，Our cut off wheel allows dry cutting of many metal type materials likes tubes&structural、sheet metal、stainless steel、solids、rebar、castings、steel plates、non-ferrous..
  • LONG LIFE - Metal cutting blade according to the test results, OKDIAMOND enables to make more than 3000 cuts. Increased lifetime of this cut off wheel is ensured by high-temperature plasma soldering and a new generation of diamond grit in the segment. And our cut wheels have no wear and tear after work , it does not wear down like bonded abrasives.
  • Environmental - When you use our cutting wheel : less sparks, no dust, no smell, no overheating. reducing dust particles for a cleaner work station. It's very comfortable in usage than traditional wheels. It's 100% contaminant-free. The diamond cutting wheel can be used for grinding burred edges that can leave after rough metal cutting..
  • SAFETY- Wheel breakage eliminated when operating at high rotation speed (13200 RPM) because of special construction of the disc ....
Check Stock

TECCPO Rotary Tool Accessories Kit 396pcs Grinding Polishing Drilling Kits 1/8 Shank Electric Grinder Universal Fitment for Easy Cutting Grinding Sanding Sharpening Carving and Polishing

  • 396PCS Rotary Tool Assortment Kit - Perfect includes rich rotary tool accessories for sanding, polishing, cutting, shaping, drilling, deburring,....
  • Solid Carrying Case - It’s more solid, falling resistant, and moisture-proof. All accessories are well organized, easy to place, lightweight,....
  • Wide Usage - It has 1/8" diameter shanks and is a perfect partner of most rotary tools. 4 sizes collets (1.6mm, 2.3mm, 3.2mm*2) compatible with most....
  • Features - Suitable for most ferrous and non-ferrous metals, castings, welded joints, rivets, rust, stone, glass, ceramics, and porcelain. Sanding....
  • GREAT DIY GIFTS - TECCPO Rotary Tool 396 Pcs Accessories Kit is great for DIY craft and small family projects. It’s also a gift for the people who....
Check Stock

WORKPRO Rotary Tool Accessory Set, 208-Piece Multi-Functional Attachments for Easy Cutting, Grinding, Sanding, Wood Working, Carving, Universal for Major Brands, W124105A

  • With 1/8-inch diameter shanks and 4 pieces collets in different sizes (1/16”, 3/32”, 1/8” 2). this kit is universal fitment for all major brands, such as dremmel, WEN, Bosh and etc.
  • This 208 pieces rotary Accessories include polishing wax, drill bit, resin cutting disc, wool felt, felt polishing tip, resin cutting disc connecting rod, grinding needle, etc.
  • Strong plastic case for organizing variety of bits orderly, which makes the rotary bits kit portable and hangable.
  • Ideal for sanding, carving, deburring, cutting, drilling, grinding, polishing, engraving, meet your various DIY application requirements and also perfect present for Christmas, Birthday, Thanksgiving Day, fathers' Day and etc.
  • Suitable for most ferrous and non-ferrous metals, castings, welded joint. Accessories for fine detail work on jade, ceramic, glass, wood, Hardened steel, cast iron, stainless.
Check Stock

Gunpla 10pc 1/4 Inch Hex Shank Wire Wheel Brush Set Crimped Mini Cup Brush Set for Removal of Rust Corrosion Paint for Power Rotary Tools Polishing Cleaning Buffing Accessories

  • ...st etc with these perfectly manufactured mini brushes..
  • WIDE APPLICATION: Use our wire wheel, crimped and cup brushes for daily projects and tasks. Great for all types of detail work in both hard and delicate materials, these high quality mini wire rotary brushes are suitable for most ferrous and non-ferrous metals, castings, welded joints, rivets, stone, glass, etc..
Check Stock

Zircon MetalliScanner MT6 Professional Metal Detector

  • Find ferrous and non-ferrous metal up to 6 in. (152 mm) deep in concrete and other non-metallic surfaces.
  • Automatically differentiates between magnetic metal (such as rebar) and non-magnetic metal (such as copper pipe).
  • Shows the depth of metal from the surface in both inches and centimeters.
  • Helps map out the grid of metal through any nonmetallic construction material, including concrete, tile, and marble.
  • Ideal for finding and/or avoiding rebar, cables, pipe, nails in reclaimed wood, nails/tacks in studs behind lath & plaster walls, electrical boxes and conduit, and more.
Check Stock