Reviews Non Standard Bearing

Sunny Health & Fitness Door Way Chin Up and Pull Up Bar

  • STURDY CHROME PLATED STEEL BAR: Train like a pro with the tough and secure exercise trainer supporting tough workouts. When mounted properly, the fitness bar holds up to 220 pounds giving you full support for pull-up and chin ups..
  • ADJUSTABLE LENGTH: Easily adjust this exercise bar so you can take your fitness on the go! Adjustable length (24. 5 to 36 inches) provides a customizable workout..
  • COMFORT GRIPS: Minimize risks of calluses or hand cramping with padded handles. Non-slip extra-long foam grips for extra comfort to minimize hand fatigue. Put the door bar lower to the ground and use it to help you perform push-ups!.
  • MAXIMUM STABILITY: Includes weight bearing brackets for maximum stability during your chin-ups and non-weight bearing brackets for sit-ups. Fits into any standard door frame.
  • EASY STORAGE: Set up in seconds in almost any doorframe and easily store away in a closet. Adjustable length (24. 5 to 36 inches) provides a customizable workout for your home and body..
Check Stock

UFOR Urban-Style Painted City Bike Pedals, Aluminum 6061 Non-Slip 9/16” Bicycle Pedals for Commuter Bikes, Cruisers Bicycles, Road Bicycles, Junior Bicycles, City Bicycles, Folding Bike and e-Bike

  • NON-SLIP DESIGN – Non-slip tooth design at the edge plus four traction pins for optimal traction strength.
  • LIGHTWEIGHT – Extreme lightweight improves cycling efficiency, only 220g per pair with pins.
  • BEARING – LSL bushing and sealed bearing reduces weight and thickness.
  • PEDAL BODY – Durable high-strength extruded and CNC-machined 6061 aluminum body.
  • COMPATIBILITY – Standard 9/16” sturdy Cr-Mo axle fits for most bikes, easy to install.
Check Stock

VCT Rear Axle Bearing Remover Puller Slide Hammer Set Remove Semi-Floating

  • ...de of bearing and tighten the nut on smaller end of puller, then thread a slide hammer (not included) to the puller and slide hammer back and forth until the bearing comes out.
  • The washer captures the bearing firmly to distribute the applied force over the entire bearing and prevent damage.
  • Use the VCT Pneumatic SAE Standard Rear Axle Bearing Puller 3-Piece Service Set – Domestic Car Vehicle Bearings Removal Tool Kit to service semi-floating rear axle bearings on your vehicle.
  • These tools make the job simple and prevent damage to your bearings when pulling.
  • Much easier than claw-type axle bearing pullers that slip off and chew up the old bearings.
  • For removal only, not intended for installation.
  • FITS YOUR CAR: Standard SAE sizes work for most American domestic makes and models.
  • Set includes the following sizes to fit main bearing tube – 1 inch to 1-7/8 inches, 1-5/16 inches to 2-3/8 inches, and 1-3/8 inches to 2-7/8 inches.
  • Sizes permanently laser-etched on tool for easy identification.
  • Each tool fits a basic slide hammer with a 5/8-inch x 18 thread pitch.
  • EASY STORAGE: Heavy-duty plastic blow-molded carrying case for easy transportation, safe storage, and quick organization.
  • PACKAGE CONTENTS: Package includes (3) rear axle bearing removers and (1) c....
Check Stock

NPET Pro Skateboard Complete 31 Inch 7 Layer Canadian Maple Double Kick Concave Deck Skating Skateboard (Colorful Graffiti)

  • HIGH QUALITY: 7 layers maple wood, PU wheels, stainless alloy bearing. 31″(787mm) x 8″(203mm) double kick concave design. ABEC 11 high speed precision bearing. Wheel Diameter: 2.1inch. Max Load-Bearing: 220 LB..
  • HIGH REBOUND SMOOTH ROLL: 95A High-rebound PU wheels provide great roll and grip. Heat transfer pattern(which was printed onto the board,not a sticker).
  • SANDPAPER ON TOP: High density emery non-slip and waterproof surface makes you safer during riding or playing tricks on this complete skateboard. Suitable for kids, adult and beginners. Perfect gift for teen boys..
  • SKATEBOARDS FOR BEGINNERS: Anyone is able to ride this standard skateboard, and perform skateboarding tricks with ease. Great combination of exercise and fun, totally portable, and ideal for beginners or skilled riders..
  • MONEY BACK GUARANTEE – 30 Days Money Back Guarantee, Lifetime Quality Guarantee. If You Have Any Questions, Please Have No Hesitation To Contact Us, Perfect Service Is Always Our Goal..
Check Stock

NPET Pro Skateboard Complete 31 Inch 7 Layer Canadian Maple Double Kick Concave Deck Skating Skateboard - White Monster

  • HIGH QUALITY: 7 layers maple wood, PU wheels, stainless alloy bearing. 31"(787mm) x 8"(203mm) double kick concave design. ABEC 11 high speed precision bearing. Wheel Diameter: 2.1inch. Max Load-Bearing: 220 LB. USA WAREHOUSE DELIVERY..
  • HIGH REBOUND SMOOTH ROLL: 95A High-rebound PU wheels provide great roll and grip. Heat transfer pattern(which was printed onto the board,not a sticker).
  • SANDPAPER ON TOP: High density emery non-slip and waterproof surface makes you safer during riding or playing tricks on this complete skateboard. Suitable for kids, adult and beginners. Perfect gift for teen boys..
  • SKATEBOARDS FOR BEGINNERS: Anyone is able to ride this standard skateboard, and perform skateboarding tricks with ease. Great combination of exercise and fun, totally portable, and ideal for beginners or skilled riders..
  • MONEY BACK GUARANTEE - 30 Days Money Back Guarantee, Lifetime Quality Guarantee. If You Have Any Questions, Please Have No Hesitation To Contact Us, Perfect Service Is Always Our Goal. 5 days handling time, 10 days delivery..
Check Stock

DURATECH 3-Piece 3-Jaw Gear Puller, 3\

  • ...ler jaws allow for easy gripping and access to tight spaces. No need to assemble yourself is the advantage of DURATECH..
  • Each of the three 3-jaw gear and bearing pullers can be reversed to pull parts from either the inside or outside. Universal 4 or 8 position reversible jaws offer inside or outside grip with short, standard, long or extra-long reach..
  • Three-jaw design balances the pulling force well, and claws are precisely machined to give a non-slip and secure grip on the gears. Make it deal for pulling work in confined areas. Achieve more with its adjustable and reversible jaws..
  • Use the DURATECH 3, 4, 6-Inch Gear Puller 3 Jaw Flywheel Puller Set to remove most shift-fitted parts with ease. Perfect for you to smoothly and safely slide gear, pulley, bearing, and flywheel off the shaft. Free replacement insures your DURATECH Wrenches purchase against manufacturer defects..
Check Stock

TPOHH 4 Inch X 3 Inch Stainless Steel Ball Bearing No-Mortise Door Hinges, Surface Mount Flat Leaf Hinge with Mounting Screws 3 Pack - Smooth Movement Rotatable 360° , Brushed Silver Finish

  • ... Hinge】Applying superior bearing, the door hinges are capable of rotating 360° and difficult to get stuck or stagnate, Smoother operation prevents squeaking noises, The greased bearings reduce the rotational friction extending the life of a hinge in heavy use situations. These hinges tend to be more durable than standard, or plain bearing hinges..
  • 【Non-Removable Pin】Heavy-gauge Stainless material for added strength, Suitable for doors up to 99 lbs (max. 45KG). Equipped with two permanently lubricated ball bearings for smoother and quieter operation. This TPOHH non-mortice hinge has a non-removable riveted pin for extra security on external doors..
  • 【DETAIL SIZE AND VALUE PACKAGE】3 packs of stainless steel hinges, and 24 pieces of mounting screws included. The no mortise hinge size is 4 x 3 inches, the thickness is 0.1 inch/2.5mm. The screw size is #8 x 1 inch. These hinges could be mounted on shed windows, shed hardware, shutters, skylights, vents, flower boxes, etc. for all kinds of outdoor buildings such as sheds, playhouses, animal shelters, and more..
  • 【Reliable Quality】 Your Experience With The Product Is Our Guideline. If You Shall Have Any Concerns, Send Us An e-Mail And We Will Get To You Within 24 Hours. If You Are Not Fully Satisf....
Check Stock

Replacement Glider Swivel Mechanism with Ring Base

  • PLEASE CALL FIRST to discuss the width of your seat frame that your are trying to attach the glider to. 4239435939.
  • A standard ring base with a 49 ball bearing full race swivel plate with a 10 10 glider attached.
  • Add swivel and glider motion to any matching chair.
  • standard ring base with a 49 ball bearing full race swivel plate..
  • a 10 x 10 glider is attached to the standard ring base.
Check Stock

Mountain Bike Pedals - Dual Function Flat and SPD Pedal - 3 Sealed Bearing Platform Pedals SPD Compatible, Bicycle Pedals for BMX Spin Exercise Peloton Trekking Bike (Red)

  • ...ly prevent your shoes from sliding off, whatever position you place your feet that’s where they stay on..
  • 【MATERIAL &SIZE】- This bike flat pedals was made with CNC integration aluminum alloy material lightweight, high strength and long durability ,4.17*3.62*0.9 inches, L for left pedal, R for right pedal. Standard 9/16 inch screw thread sturdy axle bearing, Weight: 13.54oz (384g)/pair.
  • 【SEALED 3 BEARING】– 3 Fully sealed bearing Mountain bike pedals can ensure the stability and reliability of the pedals while protecting the spindle from water and dust. which ensure great durability and anti-corrosion. Keep pedals spin smooth and without noise. Allowing you to enjoy worry-free riding anytime, anywhere..
  • 【EASY TO INSTALL】– The Non-Slip bicycle pedals have a clear mark to identify the installation direction. "L" for left pedal, "R" for right pedal. No longer to worry about being unable to distinguish the direction of pedals!International standard 9/16'' inch screw thread fits for most brand bikes, for BMX, MTB, mountain bike, Hybrid bike, cruiser, commuter bike, dirt jumper, folding bike, road bike, touring, track bike, unicycle, urban bike ..
  • 【EASY CLIP IN/CLIP OUT】- Adjustable entry and release tension settings, the cleats t....
Check Stock

DURATECH 8-Inch 3-Jaw Gear Puller, Removal Tool for Gears, Pulleys, Bearings and Flywheels, Fully Assembled, CR-V Steel

  • Drop-forged Cr-V steel jaws are heat-treated for extra strength and durability. This 3-jaw removal tool works with your wrench, ratchet, or spanner as a gear puller, sprocket puller, bearing puller, pulley puller, flywheel puller and more..
  • Three jaws come with fine chrome plating to provide a reliable and effective rust and corrosion protection. Drive screw is covered by black phosphatizing, which provides maximum strength and longevity to the gear puller, puller jaws allow for easy gripping and access to tight spaces. No need to assemble yourself is the advantage of DURATECH..
  • Each of the three 3-jaw gear and bearing pullers can be reversed to pull parts from either the inside or outside. Universal 8 position reversible jaws offer inside or outside grip with short, standard, long or extra-long reach..
  • Three-jaw design balances the pulling force well, and claws are precisely machined to give a non-slip and secure grip on the gears. Make it deal for pulling work in confined areas..
  • Jaw Spread: 8in, Jaw Reach: 9-1/16in, Puller: 12T. Perfect for you to smoothly and safely slide gear, pulley, bearing, and flywheel off the shaft. Free replacement insures your DURATECH Wrenches purchase against manufacturer defects..
Check Stock