Reviews Noise Damping - BestBuyersPro.com

Design Engineering 050215 Boom Mat Damping Tape, 2\ x 20ft Roll

A multi-purpose sound deadening material with peel and stick application.
Great for any tool box, use anywhere to help reduce road noise, sound system vibrations, rattles, dash board plastic-to-plastic chafing sounds, and more.
Ideal for hard to reach areas as well as for covering wire and cables running along floorboards.
Use around your home on heating and cooling ducts, seams in drain gutters, and home stereo systems.
Made with 2.5 mm thick butyl rubber with aluminum facing for the same noise blocking and sound damping qualities as Boom Mat damping material.

Suitable for air compressors, diesel engines, gasoline engines, water pumps.
As a damping element for welding machine and other equipment for vibration, shock and noise control.
Simple geometrical design supports dynamic performance and stability under lateral (sideways) forces.
Protect the body's normal work and get good surroundings, damping noise reduction and the effect is obvious..
In the radio equipment, instruments, instrument, protect machine vibration interference , with a good buffer.

Mainly Used: This anti-vibration rubber isolator mount is mainly used for air compressors, diesel engines, gasoline engines, water pumps..
Damping Elements: This anti-vibration rubber isolator mount always used as damping elements for vibration and noise control..
Main Function: This anti-vibration rubber isolator mount can protect the machine's normal work and get good surroundings, reducing noise and shock obviously..
Simple Geometrical Design: This anti-vibration rubber isolator mount adopts simple geometrical design that supports dynamic performance and stability under lateral/sideways forces..
Anti-Vibration Silent Block: In audio equipment and instruments, This anti-vibration rubber isolator mount avoids machine vibration interference, having a good buffer..

Frequency Response: 7 Hz - 500 Hz (+0, -1dB).
Min.Copper Power / Ground Wire Gauge: 4 AWG wire.
S/N Ratio, referred to 1 W: >50 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth).

Frequency Response: 7 Hz - 500 Hz (+0, -1dB).
Min.Copper Power / Ground Wire Gauge: 4 AWG wire.
S/N Ratio, referred to 1 W: >50 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth).

BRIEF INTRODUCTION - This Rubber Anti-Vibration Isolation Mount can protect the machine's normal work and get good surroundings, reducing noise and shock obviously. Mainly used for air compressors, diesel engines, gasoline engines, water pumps, and other welding machine and other equipments as a damping element..
MAIN USE - Used as damping elements for vibration and noise control..
FUNCTION - Protect the machine's normal work and get good surroundings, reducing noise and shock obviously..
HIGH PERFORMANCE - Simple geometrical design supports dynamic performance and stability under lateral/sideways forces..
FEATURE - In audio equipment and instruments, avoid machine vibration interference, having a good buffer..

【High Performance Cooling Fan】 Automatic speed control of the motherboard through the 4PIN PWM fan cable interface, which can determine the speed according to the temperature of the motherboard, with a maximum speed of 2200RPM..
【Vibration damping and low noise】 Four vibration damping pads around the fan reduce the vibration friction caused by PC fan rotation, perfectly reducing noise and allowing low noise operation..
【Dimensions of Silent Fan】 Size: 80*80*15mm, Speed: 2200RPM±10%, Noise ≤23.3dBA Connector: 4pin pwm, wind pressure: 1.25mm H2O,Air Flow: 28.4CFM (MAX), Higher air flow for improved cooling performance..
【Quality Bearings】 Carefully developed, solving the problem of shaking fan blades in lifting mode with durability, quality S-FDB V2 bearings keep fan noise to a minimum while providing maximum cooling performance when needed and extending the life of the case fan..
[Perfect match] The ultra-thin fan can not only be used as a case fan, but also suitable with downward coolers to cooling down CPU jointly aim at maximized heat dissipation performance.
Ideal for cases, radiators and CPU coolers..

【High Performance Cooling Fan】 Automatic speed control of the motherboard through the 4PIN PWM fan cable interface, which can determine the speed according to the temperature of the motherboard, with a maximum speed of 2200RPM..
【Vibration damping and low noise】 Four vibration damping pads around the fan reduce the vibration friction caused by PC fan rotation, perfectly reducing noise and allowing low noise operation..
【Dimensions of Silent Fan】 Size: 80*80*25mm, Speed: 2200RPM±10%, Noise ≤24dBA Connector: 4pin pwm, wind pressure: 2.7mm H2O,Air Flow: 34CFM (MAX), Higher air flow for improved cooling performance..
【Quality Bearings】 Carefully developed, solving the problem of shaking fan blades in lifting mode with durability, quality S-FDB V2 bearings keep fan noise to a minimum while providing maximum cooling performance when needed and extending the life of the case fan..
[Perfect match] The ultra-thin fan can not only be used as a case fan, but also suitable with downward coolers to cooling down CPU jointly aim at maximized heat dissipation performance.
Ideal for cases, radiators and CPU coolers. Easy to install, can be combined with instructions or installation tutorials..

10455 - Dynamat Xtreme 36ft Bulk Pack Sound / Vbration Damping for an Entire Car.
Dynamat Xtreme Bulk Kit Sound and Vibration Damping/Deadening for the Entire Car.
Designed for use on rear decks, doors, floors and the floor of your trunk.
Contains nine 18" x 32" sheets of Dynamat.
Get more bass, more music, lower road noise and better sound for your car audio system.

... resilient, anti-vibration, the metal stud is two pieces terminated and bonded within the rubber..
【Anti Vibration Design】--These heavy duty mounts provide excellent noise and vibration reduction, Composite material with natural rubber by innovative synthesis make the rubber mounts more efficient and durable..
【Damping Capacity】--As a damping element for welding machine and other equipment for vibration, shock and noise control. These heavy duty rubber isolator mounts provide excellent noise and vibration reduction due to the softness of the rubber..
【Adapt to many kinds of motors】--Rubber isolator mounts are suitable for air compressors, diesel engines, gasoline engines, water pumps, Electron components, medical equipment, home appliance, mechanical equipment, office facilities, aviation, construction, automobile and may more applications..
【More after-sales service】--We stand behind all of our them with a 100% product guarantee and promise to give you the best in customer care! If you have any issue about the anti vibration bobbin mounts, please contact us by e-mail, we will try our best within 24 hours to reply..