Reviews No Resistance Check Valve

75mm IBC Tote Tank Adapter Ball Valve, IBC tote valve, 2.95' Coarse Thread Tote IBC Ball Valve Connector Replacement for IBC Tote Water Liquid Container

  • 【WIDE USAGE】— 75mm IBC Tote Adapter is suitable for plastic container outlet control to prevent liquid from splashing around. Widely used in chemical process and acid, liquid storage buckets, tanks, container outlet control valves..
  • 【IBC TOTE ADAPTER】— This IBC tote tank adapter ball valve is made of high-density polyethylene and plastics, which is acid resistance, alkali resistance, corrosion resistance, high mechanical strength, and durable to use..
  • 【NO LEAK】— IBC tote fittings with inner diameter input end diameter 75mm, pitch: 0.19″ (5mm).
  • 60mm/2.36″ diameter for suitcase drain cover, liquid storage buckets, and tanks outlet control valves to prevent liquid leakage..
  • 【EASY TO INSTALL】— 2.95″ coarse thread tote ball valve is easy to install, just need to connect to the water tank to use, equipped with silicone gasket and raw material tape to enhance sealing..
  • 【PACKAGE INCLUDED】 — Purchase IBC tank drain adapter from Catilon, you can get 2.95’’ IBC adapter ball valve, IBC A200-S60*6(mm) + IBC tote valve cover + spout cap + silicone gasket (NOTE: Please carefully check the size of the IBC Tote Ball Valve before purchasing). Please confirm the thread diameter of your IBC tank adapter is 60mm..
Check Stock

10 pieces Transparent Silicone Duckbill Valve One-way Check Valve 15 x 7.3 x 19.5mm for Liquid and Gas Backflow Prevent

  • 100% full rubber or silicone structure, can meet a variety of high temperature. No clogging good sealing effective prevention of liquid gas backflow.
  • All-rubber structure corrosion resistance long service life good effect And provide a tight seal prevent backflow maintenance-free..
  • When installing the check valve special attention should be paid to the direction of flow of the medium and the normal flow direction of the medium should be consistent with the direction of the arrow indicated on the valve body otherwise the normal flow of the medium will be cut off. Opening the pressure is small generally open 1-5KPA pressure liquid or gas it can open, good sealing Easy to install.
  • Silicone Duckbill Valve Made from Environmentally friendly silicone material.
  • Outer diameter 15, inner diameter 7.3, height 19.5 MM.
Check Stock

X AUTOHAUX VS50807R Valve Cover Gasket Set for Chevrolet Cruze Sonic Trax 1.4L L4 2013-2020 for Buick Encore for Cadillac ELR VS50710 55573747

  • for Buick Encore Preferred Essence 2WD AWD 2017-2020.
  • Replace part number:VS50807R VS50710 55573747.Please double check the part number of your own one..
  • Material:Made of durable rubber material, sealing, oil resistance, wear resistant,high temperature resistance, corrosion resistance, long service life, effectively prevent engine oil leakage into the valve mechanism..
  • Function:The purpose of the valve cover gaskets is to seal the cylinder to ensure no leakage of coolant or oil into the cylinder. Head gaskets prevent leakage of liquid and gas into adjacent cylinders and surrounding coolant galleries..
  • Replacement:If your valve cover leaks, your oil is always low, or you smell burning oil, you will need to replace the valve cover gasket..
Check Stock

Engine Valve Cover 55561426 Replace # 55573746 25198498 264-968 Fit for 2011-2019 Chevy Cruze Sonic Volt Trax Buick Encore Cadillac ELR 1.4L Turbo + (with Gaskets Bolts & Oil Filler Cap)

  • 【Replace Part No】Engine Valve Cover 55561426 Replace 55573746 264-968 25198498 25198874 25198877.
  • 【Suitable for Model Year】Valve Cover Fits for (Buick Encore: 2013- 2021/ Cadillac ELR: 2014- 2016/ Chevrolet Cruze Limited: 2016/ Chevrolet Cruze: 2011- 2016/ Chevrolet Sonic: 2012- 2020/ Chevrolet Tracker: 2013-2015/ Chevrolet Trax: 2013- 2021/Chevrolet Volt: 2011- 2015 )1.4L . Be sure to check your vehicle trim using the Amazon garage..
  • 【High Quality】 264 968 Valve Cover Made from premium injection molded polymer for excellent fit and heat resistance, Meet OEM quality and long time to use . Seamless link gasket without issue of leakage , this valve cover matches the original equipment part for fit and function.
  • 【Valve Cover Assembly Includes】 1 x Valve Cover Assy(w/PCV Valve) + 1 x Valve Cover Gasket +1 xValve Cover Oil Filler Cap & set of Valve Cover Mounting Bolts (New: A brand-new, unused, unopened, undamaged item in its original packaging).
  • 【After-Sales Service】Confidence comes from quality！90-day free replacement! No risk purchase.So buy it WITH CONFIDENCE.true worry-free shopping experience. If you have any problem, feel free to contact us..
Check Stock

ANPTGHT One Way Check Valve 1/8 3MM Hose Barb Non Return Ozone Resistance Plastic Valve for Water Fuel Oil Air Gas Pack of 3

  • 【Material】 Plastic barb connector, made of high-quality PVED material.
  • 【Size】 1/8" OD One Way Check Valve，Can fit 1/8" hose ID.
  • 【Function】The check valves are applicable for fluid systems to prevent countercurrent liquids, or for pneumatic systems to prevent reverse flow of compressed air..
  • 【Performance】Hose barb check valve’s Opening pressure: 0.5 Kpa, Maximum back pressure: 300Kpa. Normal performance under 25 ℃ to 60 ℃,Strong resistance to acid, alkali, salt corrosion ability.
  • 【Design】The check valve is designed with a non-slip card slot inside, which has strong adsorption performance, prevents falling off, non-toxic, and has air tightness..
Check Stock

Mellbree Tire Valve Extensions 8.25 Inch Flexible Schrader Tire Valve Stem Extension with 90 Degree Schrader Tire Valve Stem Extension Adaptor Compatible for Harleys RV Bicycles Motorcycles（2pcs）

  • These long flexible tire air valve extenders successfully solved a series of operations such as inability to pump or check air pressure due to....
  • The threaded head on the valve extenders is screwed on the existing valve stem, and the included end cap replaces the existing valve stem cover.....
  • The tire valve extension joint is made of brass, which has strong wear resistance. Equipped with rubber sealing ring and sealing cover, durable. The....
  • These tire valve extensions are rubber hoses, flexible and durable, and strong plasticity. With rim clamps, you can work more efficiently, check the....
  • These tire valve extensions suitable for most bicycles, motorcycles, strollers, trailers, RVs with standard American tire valves..
Check Stock

labwork Solenoid Spool Valve with Gasket Replacement Assembly VTEC Engine Solenoid Aluminum Valve 15810RKBJ01 Fit for 05-07 Honda Accord Hybrid 05-07 Honda Odyssey EX EXL EXL-T 06-08

  • Aluminum VTEC Solenoid Spool Valve Assembly with gasket.
  • Variable valve timing solenoid valves feature a rugged spool filter design for greater leak resistance, increased durability and compatibility with a wide range of fuels.
  • VTEC camshaft solenoid valve is made of high-quality aluminum surface treatment, high temperature resistance, corrosion resistance, long-term use, improve wear resistance.
  • Please check the part number and pictures to verify this is the part you need.
  • Replacement for 05-07 Honda Accord Hybrid 05-07 Honda Odyssey EX EXL EXL-T 06-08 Honda Pilot 2WD MODELS ONLY.
Check Stock

6-Pack Valve Stem Extenders, Mellbree 45 Degree 90 Degree 135 Degree Schrader Tire Valve Extension Compatible for Dual Wheels Passenger Cars, RV, Stroller, Bicycles, Motorcycles and Trailers

  • ...alve core, they can allow inflation and deflation, which is convenient and quick. Be sure to tighten the thread when using it, otherwise the best sealing effect cannot be achieved..
  • The tire valve extension joint is made of brass, the surface is chrome-plated, the chrome-plated layer has higher hardness, better heat resistance, and is not easy to rust. Equipped with rubber sealing ring and sealing cover, durable. The bottom of the extension piece rotates freely, which is easy to operate, convenient and efficient..
  • Prevent air leakage! 1. Install the valve angle extension on the valve core, and be sure to tighten the thread of the rotating part so that there is no air leakage. 2. When you are adjusting the angle, you rotate the valve extension. After the angle adjustment is over, you must tighten the rotating thread to the maximum. 3. The threaded head on the valve extenders is screwed on the existing valve stem, and the included end cap replaces the existing valve stem cover..
  • Our valve core adapters are equipped with rubber sealing rings and sealing caps to ensure air tightness without leakage. It is recommended to tighten the sealing caps quickly after use to prevent air leakage！.
  • These tire valve extensions suitable for most bicycles, motorcycles, s....
Check Stock

Sink Soap Dispenser Extension Tube Kit 47' with Check Valve, No Need to Fill The Little Bottle Again!

  • MAKE YOUR LIFE EASIER: With 47" sink soap dispenser extension tube kit, use the big bottle directly, no need to refill small bottles anymore..
  • HIGH QUALITY: Food-Grade silicone soap tube is soft and elastic, check valve make it easier to pump out the soap..
  • EXCELLENT DESIGN: We supply 4 multiple caps to fit most soap and lotion containers. A check valve and pp ball keep soap primed at the top of the tube!.
  • EASY TO USE: With the long hose, skipping the messy process of refilling the soap dispenser. The check valve and pp ball will keep soap always primed in your soap dispenser, so you don’t waste time pumping..
  • WHAT YOU GET:4 bottle stoppers to fit most soap containers, a check valve connect two tubes, a pp ball and 2 fastening bolts.NO SOAP DISPENSER PUMP INCLUDED..
Check Stock

4-way 5/16" Barb CO2 Distributor Manifold with integrated check valves

  • LIGHT AND DURABLE aluminum body is lighter than steel but remains durable and long lasting. Aluminum is the industry standard for CO2 manifolds for their strength and resistance to corrosion. This manifold is ideal for homebrewers, bars, or anyone who is looking to easily split gas for beer or beverage dispensing and even for force carbonation..
  • INTEGRATED HIGH QUALITY CHECK VALVE OUTPUTS prevent liquid from flowing into the manifold and your regulator. Don’t worry about dirty lines or ruined regulators ever again! Every integrated check valve ensures that your beer stays on the right side of the line..
  • NO LEAKS due to ample thread tape and vigorous water testing after assembly. All manifolds are internally cleaned before assembly for the purest air possible. Don’t settle for mass produced, low quality manifolds from overseas. The Weekend Brewer manifold is the highest quality manifold on the market due to rigorous testing and quality control..
  • MOUNTING HOLES allows for easy installation on walls or kegerators. Two screws or nails will easily secure your manifold to any surface for ease of use..
  • MADE IN THE USA These manifolds are assembled by American workers in our Fayetteville, AR facility..
Check Stock