Reviews No Gas Mig Welder

LDHTHOPI MIG Welder 140Amp 110V Gas/Gasless Flux MIG/Lift TIG/Stick 3-in-1 Welding Machine IGBT Inverter Welder.

  • 【Easy Control Panel & 3 In 1】LDHTHOPI MIG welder machine has combo MIG (Gas/Gasless) MMA TIG welding mode. The welding machine has included with....
  • 【Advanced Technology】This DC inverter digital MIG welder voltage is 110V. Rated output current: 140 Amp. Output current range: 20-140A. Duty....
  • 【Safety & Protection】The MIG welding machine has a built-in automatic protection function for over-current, over-voltage and over-heating. The....
  • 【Compact and Portable】:The LDHTHOPI Welder Machine is true compact design. Lightweight machine body only weighs 10 lbs. And with a comfortable....
  • 【Accessories Included】The LDHTHOPI MIG Welder package includes all welding equipment you need: 1 MIG welding torch with 2m cable.
Check Stock

Eastwood Mig Welder Consumables Kit Contact Tip Set Torch Gun & Gas Nozzles in Plastic Storage Case

  • Kit Includes A Complete Set Of Consumables For Your Eastwood Mig135 Or Mig175 Welder Or Any Other Mig Welder With A Tweco-Style Torch..
  • With 20 Contact Tips (Ten 0.023 in./0.6 Mm And Ten 0.030 in./0.8 Mm).
Check Stock

Welding Basics: An Introduction to Practical & Ornamental Welding

  • 130 AMP MIG STYLE WELDER: Mig welder is easier for beginners than tig or stick style welders. Includes welding gun, ground wire clip (1.6m), Included accessories, cleaning brush, protective mask, 110v adapter.
  • GAS OR FLUX CORE: Digital MIG Welding Machine uses 0.6-0.8mm flux-cored wire. Can also be used with gas setup.
  • FULL BRIDGE CIRCUIT: Full bridge circuit provides professional level stability. Make sure to avoid models with only half bridge circuits. 60% rated duty cycle allows you to weld for six minutes then rest for four minutes.
  • DUAL VOLTAGE 110V/220V: MIG welder includes 220v plug and 110v adapter, machine features up to output that allows you to weld steel up to 0.08” plate steel. Supports, wire feeder 24V w/ 0.7KVA/1.8KVA maximum and minimum power.
  • ADJUSTABLE SPEED WIRE FEED: Adjust up to 6.7m per minute, dial in the perfect weld. Test data supports stable performance & output voltage. Automatically adjust the inverter pulse width through closed-loop control to ensure output stability.
Check Stock

Klutch 2-Tier Welding Cart with Locking Cabinet - 31 1/2in.L x 16 1/8in.W x 28in.H

  • POWERFUL 6-IN-1 MIG WELDER: The multi-process welding machine that included Gas/Solid Wire MIG(GMAW), Gasless Flux Core MIG(FCAW), Stick/MMA, Spot welding, Lift TIG, spool gun connector optional (tig gun and spool gun not included). Suitable for all kinds of welding requirements .023”/.030”/.035” solid wire, .023”/.030”/.035” flux core wire, .035”/.045” aluminum wire..
  • SYNERGIC MIG: Digital control and automatically match the recommend current and wire feeding speed when selecting the diameter of welding wire and gas material, also you can adjust the welding current according to your welding habit. Easy to work with beginners or professional welders. Cooling fan that runs only when it's needed so no constant buzzing sounds..
  • MULTI-FUNCTIONAL WELDER: The MIG welder features some special functions that included adaptive crater, burn-back adjustment and pre-flow/post-flow, which improve your welding efficiency. 2T/4T 2 welding way meets your needs. Store 10 preset settings: can set 10 groups of parameter data for each welding mode, it’s more convenient to start the next welding job..
  • REVOLUTIONARY LARGE LED DISPLAY: Exclusive human-computer Interaction LED screen design, provides you with accurate data display and makes you read easier an....
Check Stock

HZXVOGEN Multifunctional MIG Welder 110V 220V 185A with Color LCD Display IGBT Inverter MIG MMA Lift TIG Stick Gas Mix Gases Gasless Flux Cored Wire Solid Core Wire Welding Machine Model MIG185Ⅱ

  • ★ THE COOLEST AND PLEASANT MULTIFUNCTIONAL WELDER - HZXVOGEN MIG185Ⅱwelder came with color LCD display with make the setting parameter very easy....
  • ★ MIG FUNCTION - HZXVOGEN MIG185Ⅱwelder supports gas, mix gas and gasless function. This welder can work with 0.8/1.0mm welding wire to weld....
  • ★ LIFT TIG FUNCTION - Can use 1.6mm and 2.4mm tungsten to weld 1- 6mm thickness. Can weld stainless steel. If you need to use lift tig function, a....
  • ★ MMA FUNCTION - Current 22 ~ 185 amp. Can weld 2.5/ 3.2/4.0mm electrode. It can weld 2-12mm thickness. It is super easy to strike an arc, little....
  • ★ IMPORTANT NOTE - This welder can work on both 110V and 220V. The “SIM” ”SIG” is for dual pulse function, but this welder does not have....
Check Stock

Welding Machine 3 in 1 Gasless Mig Welder 110/220V, Flux Core/Lift TIG/Stick Welder 160A

  • Welding Machine 3 in 1: 3 in 1 combo gasless flux core welder, stick welder and Lift TIG welder. (TIG torch need purchasing separately)..
  • Dual Voltage Input Design: Welding machine can be plugged into 110V / 220V dual voltage (automatic matching)..
  • 160A Welder: Up to 160A output current that can weld mild up to 5/32 inch (4.0mm) plate. The welder comes with 10pcs welding rods..
  • Gasless MIG Welder: Release hard moving of gas cylinder, and work with flux core wire perfectly( welder suitable for 0.030/0.035" flux core wire), comes with 1pcs 0.030"/2 lbs flux core wire, 2pcs 0.030" mig tips, 2pcs 0.035" mig tips..
  • Synergic Control: Through a knob to adjust the welding current, other welding parameters (wire feeding speed, welding voltage, inductance value, etc.) automatically matched with it. It has the feature of easy adjustment. It is suitable for both professional welders and novices..
Check Stock

Mig Welding Machine,MYYWELD Mig Welder MIG/MMA/TIG 3 in 1 Flux Core Wire Digital 130D Dual Voltage 110/220V, Gas/Gasless Stick-Solid Wire Automatic Feed IGBT Inverter Welder

  • The application of IGBT technology has significantly enhanced the welding machines reliability and turned them into a lighter and compact version . Also you canot ignore about this wire feed welder is the integrated wire feeder, to whom you should thank when you see a smooth wire feed. 2lbs quality welding wire included..
  • MULTIFUNCTIONS IN ONE MACHINE- You can work with CO2 gas, mixed gas or without gas. Welding machine mig uses 0.8mm or 1.0mm flux core wire.Gasless(flux core wire) and Gas(solid wire) welding: supports 2 lbs/ 10 lbs .030’’ or .040’’ wire to weld over. 030’’ thickness carbon steel stainless steel/mild steel. Duty Cycle: 60% at 130A. LIFT TIG Welding is not high frequency TIG mode, just switch to “LIFT TIG” on the panel. Stick Welding switch to “MMA” on the panel and adjust the current as needed..
  • WORKS WELL AND EASY TO PICK UP 3 in 1 welder - This portable welding machine is an amazing portable welding unit. The adjustments are simple, the sound is smooth and the welds are outstanding quality. Automatic settings are pretty accurate. The welding machine case is metal. Welder is sturdy. 100% satisfied with the fast wire feed rate way wether it welds thick or thin materials. This MYYWELD Mig Tig stick welder performs gr....
Check Stock

ZENY MIG130 Gas-Less Flux Core Wire Automatic Feed Welder Welding Machine w/Free Mask AC Current 60 AMP – Commercial Grade – 110 V

  • 【Solid Construction】– ZENY MIG 130 welding machine is compact and exquisite MIG welder is constructed of high-quality durable steel, fully painted body can withstand rust and wear, a strong and durable welding machine for your long-term use.
  • 【Flux-Cored Wire, Gas Less Welder】– This welder machine uses convenient Flux-Cored wire, self release metal-inert gas while welding, prevent oxidation of the welded part. Automatic Thermal Safety Protection, Ideal for welding mild steel, stainless steel..
  • 【 Adjustable Feeding Speed】– ZENY MIG welder features 4 levels of current flow settings, by adjusting the 4 buttons for MIN/MAX,1/2. It also features a wire feeding speed adjust rotary knob, 10 levels of wire feeding speeds for your choice. Torch With Full On / Off Safety Control.
  • 【Widely Applications】– It is perfect for perfect for home DIY and general repairing work. Ideal for both home garages and workshops..
  • 【Specifications for This Welder】– Frequency : 50/60HZ/ Max absorbed power (KVA): 3.6/ Absorbed power 60% (KVA): 1.1, Power factor:0.9, Flux wire diameter (MM): 0.8-0.9, Max Open Voltage: 37V/ Current range (A):50-90.
Check Stock

ARCCAPTAIN MIG Welder, 200Amp 6 in 1 Gas MIG/Gasless Flux Core MIG/Stick/Lift TIG/Spot welding/Spool Gun 110V/200V Aluminum Multi Process Welding Machine with LED Digital Display, Burn Back Adjustment

  • POWERFUL 6-IN-1 MIG WELDER: The multi-process welding machine that included Gas/Solid Wire MIG(GMAW), Gasless Flux Core MIG(FCAW), Stick/MMA, Spot welding, Lift TIG, spool gun connector optional (tig gun and spool gun not included). Suitable for all kinds of welding requirements .023”/.030”/.035” solid wire, .023”/.030”/.035” flux core wire, .035”/.045” aluminum wire..
  • SYNERGIC MIG: Digital control and automatically match the recommend current and wire feeding speed when selecting the diameter of welding wire and gas material, also you can adjust the welding current according to your welding habit. Easy to work with beginners or professional welders. Cooling fan that runs only when it's needed so no constant buzzing sounds..
  • MULTI-FUNCTIONAL WELDER: The MIG welder features some special functions that included adaptive crater, burn-back adjustment and pre-flow/post-flow, which improve your welding efficiency. 2T/4T 2 welding way meets your needs. Store 10 preset settings: can set 10 groups of parameter data for each welding mode, it’s more convenient to start the next welding job..
  • REVOLUTIONARY LARGE LED DISPLAY: Exclusive human-computer Interaction LED screen design, provides you with accurate data display and makes you read easier an....
Check Stock

Goflas 160A MIG Welder, 110/220V Flux Core Welder MIG/Lift TIG/Stick 3 in 1 Welding Machine with IGBT Inverter Gasless Welder with Welding Gun, Electrode Holder, Earth Clamp and 2lb Welding Wire

  • 【Multifunctions】3 in 1 Welder Machine Suitable for Gasless Flux Wire MIG Welder, Stick Welder and Lift TIG Welder. (Need to buy extra Lift tig torch).
  • 【IGBT inverter technology】160A Welding Machine adopts advanced IGBT inverter technology, which improves the reliability of the welder. Powerful arc force makes welding more stable, efficient, convenient, deeper penetration, constant welding current to keep the arc stable, especially in low current welding..
  • 【Gasless Flux-cored Welding Machine】160A Flux core Welder is a versatile flux core arc welder, specifically designed to use self-shielding flux-cored welding wire.This eliminates the need for gas and regulators that normal MIG welders require..
  • 【Synergic Control】Through a knob to adjust the welding current, other welding parameters (wire feeding speed, welding voltage, inductance value, etc.) automatically matched with it. It has the feature of easy adjustment. It is suitable for both professional welders and novices..
  • 【Package includes】: 1* 160A MIG Welder, 1* MIG Torch, 1*Electrode Clamp, 1* Earth Holder, 1* .030"/2lb Flux Cored Wire, 1* 0.8MM/.030" Contact Tips, 1* 0.9MM/.035" Contact Tips, 1* Brush&Hammer, 1* User Manual..
Check Stock