Reviews Nitriding Process

Atoplee 4pcs Miniature Axial Ball Thrust Bearings F8-16M (8x16x5mm)

  • Model: F8-16M,Inner Diameter*Outer Diameter*Thickness: 8*16*5mm,Net weight: approx 5g.
  • High precision, fast speed, long life, uniformly load distributed, can withstand high thrust loads..
  • High performance, low noise, long life, adopts hydrogen nitriding process, high tensile strength..
  • Suitable for the general usage of meter machine, pipeline system, mold mold production..
Check Stock

SENRISE 100 X Transparent Shrink Wrap Film Bag Heat Seal Gift Packing for Homemade DIY Project Packaging Candle Jar Bath Bomb Gift 2235CM

  • EXTRUSION SYSTEM: Gradient mixing type with high-speed energy saving design, extrusion blow moulding machine gradually changed screw with same distance and different deep. Material of screw: High quality nitriding steel 38CrMoAlA,with nitriding surface HV≥800,brittleness≤2. Material of barrel: High quality nitriding steel 38CrMoAlA,with nitriding surface HV≥900,brittleness≤2..
  • DIE HEAD: Head mode of plastic toy extrustion blow molding machine, the continuous extrusion head is designed with material center coming-in type and removing the plastic melting line on the product surface, easily for material or color change, saving the time & material cost with speedy operation..
  • HYDRAULIC SYSTEM: The main hydraulic system of fully automatic precision plastic injection blow moulding machine is mainly composed of motor, pump, pressure regulating valve block, reversing valve blocks, cylinders and oil chillers. It controls platens open & close, carriage up & down, extrusion system up & down, blow pin actions, or even spinning cut and so on..
  • ELECTRICAL CONTROL: The electrical control system of plastic small bottles blowing machine is composed of operation panel, temperature control module, PLC, input & output module, proportion board, contactors, voltage s....
Check Stock

DEWALT Drill Tap, UNC, 3/8-Inch (DWADT3816)

  • ★ 【HIGH QUALITY】 These valves are made of high speed steel and present a finish of surface by nitriding for a duration and a resistance is elevated to the rust for a prolonged service life..
  • ★ 【DIFFERENT SIZES】 There are total of 6 pieces of taps in different sizes from M3 to M10 which you can use to tap various files.
  • ★ 【SPECIAL DESIGN】 The taps are designed with spiral splines and the chip reteying process would be better.
  • ★ 【FUNCTION】 These are taps with drilling function, used to drill hole and cut new threads at the same time, you will get smooth tapping experience with them.
  • ★ 【WIDE APPLICATION】 These taps are used on a machine to perform tapping, usually more precise because human error is eliminated. Suitable for drilling, tapping, cutting on soft metal, aluminum plate, iron and so on..
Check Stock

Accusize Industrial Tools No.3, 1/4'' by 7/64'' by 2'' H.S.S. Center Drill Bit, 10 Pcs, 0530-0300x10

  • 【High Speed Steel tool】- High Speed Steel construction with black rolling, nitriding treatmentfinish for proven capability and durability..
  • 【Faeture】- Flutes form helps clear chips and debris away from the bit, decreasing friction and heat for a faster, cooler drilling process..
  • 【Advantage】- The twist drill has high wear resistance and durability, and is easy to store and carry..
  • 【Application】- Perfect for stainless steel, copper, aluminum alloy, as well suit for wood, plastic..
Check Stock

6Pcs 2-in1 Combination Drill and Tap Set TOPINCN Titanium Coated HSS Metric Hex Shank Screw Taps Tool Set

  • ¡¾HIGH QUALITY¡¿ - 100% brand new and high quality. These taps are made from high speed steel and surface finished by nitriding for high hardness and rust resistance.
  • ¡¾USE FOR TAPPING VARIOUS THREADS¡¿- There are total 6 pieces of taps in different sizes from M3 to M10 that you can use for tapping various threads.
  • ¡¾SPIRAL FLUTES¡¿ - Taps are designed with spiral flutes and the chip clearing process would be better. These taps are used on a machine to do the tapping, generally more accurate because human error is eliminated.
  • ¡¾SMOOTH TAPPING¡¿ - They are taps with drilling function, used to drill a hole and cut new threads at the same time, you will have a smooth tapping experience with them.
Check Stock

JIUWU 6.35mm Hex Shank Combination Drill and Tap Set, Spiral Thread Taper Composite Drilling Screw Tapping Tool Set Kit Hand Tool M3-M10

  • There are total 6 pieces of taps in different sizes from M3 to M10 that you can use for tapping various threads.
  • They are taps with drilling function, used to drill a hole and cut new threads at the same time, you will have a smooth tapping experience with them.
  • These taps are used on a machine to do the tapping, generally more accurate because human error is eliminated.
  • Taps are designed with spiral flutes and the chip clearing process would be better.
  • These taps are made from high speed steel and surface finished by nitriding for high hardness and rust resistance.
Check Stock

6PCS Combination Drill and Tap Bits, Metric Thread M3-M10 HSS Drill Bit Set 1/4” Hex Shank Screw Tapping Tool for Tapping and Lathe (Titanium Plating)

  • 【6 Different Sizes】 6 sizes in one drill and tap bit set (M3 x 0.5, M4 x 0.7, M5 x 0.8, M6 x 1, M8 x 1.25, M10 x 1.5) to meet your diversified requirements, can use for tapping various threads.
  • 【Designed with Drilling Function】 They are taps with drilling function, used to drill a hole and cut new threads at the same time, you will have a smooth tapping experience with them. These taps are used on a machine to do the tapping, generally more accurate because human error is eliminated.
  • 【Spiral Flutes Design】 These taps are designed with spiral flutes and the chip clearing process would be better.
  • 【High Hardness & Rust Resistance】 These taps are made by high speed steel and surface finished by nitriding for high hardness and rust resistance.
  • 【Widely Application】 Suitable for drilling and tapping on wood, plank, plastic, soft metal like aluminum, iron, etc. Ideal for hole drilling, tapping and deburring/countersinking applications.
Check Stock

AS TEMAN HANDPAN, Handpan drum instrument in D Minor 9 Notes 432Hz 22 inches Steel Hand Drum with Soft Hand Pan Bag, 2 handpan mallet,Handpan Stand,dust-free cloth,gold …

  • ...y tuned by professional tuner using unique high-end equipment to ensure that each tone of is close to perfect, and it makes an ethereal sound that makes people intoxicated..
  • Premium Classic： This is our outstanding design, Professional tuning master manual tuning design, nitriding process production, premium stainless steel, stronger durability, longer use time, more ethereal music style, very suitable for handpan music enthusiast..
  • Music Gift： The best handpen drum currently on the market. Beautiful vibration sounds, as a special gift for music lovers, bring special surprises! ! ! Senior playing music gifts for any age..
  • Include packaging： Portable drum instrument, including bag. The available cloth is easy to clean after use, and the included carrying bag makes your tambourine easier to store and carry, and dust-proof..
  • Applicable objects： Handpan very popular in youngs or adults, it's used in a wide range of handpan music lovers, at the same time, it can be used for yoga training, music training, music team performances, personal travel use, this is A classic and fa....
Check Stock

For 2003-2007 6.0 Powerstroke Diesel Turbo Rebuild Kit 740659-0010 GT3782VA GT3788VA GT37VAS

  • Billet Compressor Wheel +Nitriding Treatment Unison Ring + 9 Vanes + Rebuild Repair Kit.
  • Stock turbo parts Fitment – No modifications required..
  • 2005-2007 Ford 6.0L Stock Size GT3782VA Turbo ONLY.
Check Stock

Wok Pan with Lid - 13" Nonstick Wok, Carbon Steel Woks & Stir-Fry Pans Set with 7 Cookwares, No Chemical Coated Flat Bottom Chinese wok, for Electric, Induction and Gas Stoves

  • ...serve at least 3-5 people of food portions, simply the perfect choice for family gatherings. Stir frying wok can meet your various cooking needs, like pan-frying, stir-frying, deep-frying, braising, and steaming etc..
  • [Pre-seasoned & Excellent Nonstick] Our wok pan is pre-seasoned at 600F Celsius using modern unique nitriding technology, avoiding the complicated seasoning process. This wok pan is not only non-stick, non-rusting, corrosion resistant, easy to clean, but also have no chemical coating and rich in iron, so that don't have to worry about the coating falling off and harmful substances, helps you cook original food with less oil..
  • [Premium & Durable Carbon Steel] The wok pan with lid is made of heavy-duty black carbon steel material, upgraded production process, so it superior performance and durability for lifetime using. The wok lightweight and responds to heat changes quickly evenly, saves cooking time which makes your cooking more efficient..
  • [Thoughtful Detail Design] The flat bottom wok are selected with high-grade lids that fit perfectly match the pan, detachable solid handle, not hot and easy to store,also easy to use in the oven. Flat bottom design nonstick wok, suitable for any stoves, such as induction, gas stoves, electric stoves, a....
Check Stock