Reviews Nipple Mating Hose Fitting

Stainless Steel 316 SS316 Sanitary Fitting Diameter 51MM 2 Weld Pipe with 64MM Ferrule Flange fits 2 Tri Clamp

Stainless steel 316 for resistance to corrosion and high temperatures.
Maximum operating pressure rating of 250 psi at 70 degrees F ambient temperature.
Ferrule fitting for providing a seal when compressed between two mating components.
Attaches to a fitting to help provide a leak-resistant seal on a tube or hose.
This long weld clamp ferrule sanitary fitting is suitable for use in food, beverage, and dairy applications.

Brand New MSD High Pressure Electric Fuel Pump, 45 GPH at 60 PSI, .375" Hose Nipple Inlet & Outlet (Part #2225)..
This high pressure and high flow Fuel Pump features a roller vane pump mechanism which is extremely resistant to clogging & jamming. The pump mounts in-line (out of the fuel tank) with two supplied cushioned clamps for a quick and sturdy installation. The wire terminals feature brass studs for secure connections. Ideal for use as a "booster" for nitrous oxide applications, or as a stand alone pump for multi-port EFI systems on engines up to approximately 525 HP. Capable of 45 GPH at 60 PSI..
NOTE: Compatible for Lеаded and Unlеаded Fuel Only.
Features: 45 GPH at 60 PSI | 3/8" Hose nipple inlet & outlet.
Specs: Brand: MSD | Current Draw: 12 Amps at 14 Volts | [email protected]: 45 | Inlet & Outlet Size: 3/8 in. Nipple Fitting | Product Type: Fuel Pump.

King combination nipple for connecting two hoses of different diameters in a straight run.
Connects to a hose on one end and an NPT female connector on the other.
Plated steel for greater corrosion resistance than unplated steel.
Barbed fitting for a tight seal on hoses.
King combination nipple for low-pressure discharge or suction service.

Size: 6-20mm. Quantity:10. There are 8 kinds of hose clamps in different adjustable diameters that you can choose..
Function: T bolt clamp is a device used to attach and seal a hose onto a fitting such as a barb or pipe nipple. Fit for thin wall hose in small sizes such as air hose, water pipe, fuel hose, silicone hose, etc..
Material: Made of 304 stainless steel, which ensures that it has good durability, not easy to age, anti acid and alkali, high hardness and not easy to deform..
Easy to Use: Convenient to install or remove by using either a slot screwdriver or a hex wrench. The clamp is put around the hose or tube to be connected, with the loose end being fed into a narrow space between the band and the captive screw. When the screw is turned, it pulls the threads of the band, causing the band to tighten around the hose..
Wonderful Accessory: Superior workmanship bringing a good user experience. Please check the pictures carefully before buying to avoid wrong purchase..

Size: 6-20mm. Quantity:10. There are 8 kinds of hose clamps in different adjustable diameters that you can choose..
Function: T bolt clamp is a device used to attach and seal a hose onto a fitting such as a barb or pipe nipple. Fit for thin wall hose in small sizes such as air hose, water pipe, fuel hose, silicone hose, etc..
Material: Made of 304 stainless steel, which ensures that it has good durability, not easy to age, anti acid and alkali, high hardness and not easy to deform..
Easy to Use: Convenient to install or remove by using either a slot screwdriver or a hex wrench. The clamp is put around the hose or tube to be connected, with the loose end being fed into a narrow space between the band and the captive screw. When the screw is turned, it pulls the threads of the band, causing the band to tighten around the hose..
Wonderful Accessory: Superior workmanship bringing a good user experience. Please check the pictures carefully before buying to avoid wrong purchase..

The Kegco KT85-MFL Lever Handle D System Keg Tap is the perfect coupler for anyone who wants to easily switch back and forth from domestic to home brew kegs.
This keg tap has a nickel-plated forged brass body and features a stainless steel probe and a black lever handle.
Coupler comes equipped with 1/4" MFL fittings for both the gas in and liquid out posts, so you no longer have to worry about pulling a hose off of a hose nipple or removing clamps if you want to use a different kind of coupler.
This D system keg coupler is easy to use - simply unscrew the nut from the fitting and screw it onto comparable ball lock or pin lock couplers.
Please Note: Beer Line requires a 1/4" Swivel Nut Set and Air Line requires a 3/8" Swivel Nut Set.