Reviews Network Testers

SC/UPC Fiber Optic Attenuator 10dB, 2 Pack，in-Line Attenuator, Male/Female, Single-Mode Fixed, dB Options: 3dB, 5dB, 7dB, 10dB

  • ✅SC/UPC Fiber Optic Attenuato: SC/UPC Male to SC/UPC Female, 10dB, Singlemode fixed, Ceramic Core material, 2 Pack. Provide SC adapters to ensure the connection between fiber patch cable..
  • ✅Low Insert-loss & High Return-loss: Polarization dependent loss ≤0.2dB and Return Loss: ≥ 50dB. Using an attenuator to prevent over saturating an optical receiver when the optical power is too high and ensures low bit error rates preventing damage to receiving fiber optic equipment..
  • ✅Good Repeatability & Intercalation: Widely used in Optical Fiber Distribution Frame, Optical Communication Network, Optical Fiber Broadband Access Network, Optical Fiber CATV, Optical Fiber Testers, FLAN, the performance is stable and reliable..
  • ✅Feature: Light weight, small volume, high accuracy, good stability and convenient operation..
  • ✅Attenuator Application: Optical attenuator is a passive device used to reduce the power level of an optical signal. It is generally used in single-mode long-haul applications to prevent optical overload at the receiver..
Check Stock

Ubrand Network Cable Tester, RJ45 RJ11 Multi-Function Wire Tracer and Circuit Tester with Earphone for Cable Collation, Network & Telephone Line Test, Red

  • MULTI-FUNCTION CABLE TESTER NETWORKING TOOL - Quickly find breaks without damaging the wire's outer skin. When connecting to the alligator clip, the cable tester can trace not only Ethernet LAN wires, but also electrical and speaker wires. Note: The wires must be powered-off when performing this search..
  • EASY TO OPERATE - There are only 2 buttons on the transmitter, "Function Select" and "Function Switch" and 1 button "Push to Test" on the receiver. Indicators such as "SCAN" and "TEST" are easy to identify..
  • WIRE TRACKING - Wire Tracking: Connect the wires to the transmitter via alligator clips. Select "Scan". If the "STATUS" light is ON, the transmitter is operational. Use the receiver to find the target wire. No additional testers are required..
  • NETWORK LINE TEST - Network Line Test: Plug one side of the cable into the transmitter and the other side into the receiver. Select "Test" and if the "VERIFY" light is ON, the transmitter is functioning properly. Identify circuit problem within a large number of cables..
  • DESIGNED WITH EARPHONES - Using the earphones, you can get clear information in noisy environments, and adjust the volume knob for proper volume to avoid interference..
Check Stock

Triplett CamView IP Pro Rugged IP and Analog NTSC/PAL Camera Tester with Built-in DHCP Server (8070)

  • Triplett CamView IP Pro+ All-in-One IP, NTSC/PAL, AHD, and TVI Camera Tester with Built-in DHCP Server (8071).
  • No need to buy multiple testers, the CamView IP Pro+ works with the most popular IP cameras, plus NTSC/PAL, AHD and TVI Analog cameras (IP camera must be ONVIF compliant).
  • the built-in DHCP server allows you to Set and Assign IP addresses to cameras, Auto-detect IP settings on networks, Ping, Sniff, List Subnet.
  • Record, save, and export full IP camera reports.
  • IP Camera Tests include Discover the Camera, View Camera's Video, Configure Camera's Parameters, and more.
Check Stock

Alfred SUNG by Alfred Sung Eau De Toilette Spray (Tester) 3.4 oz for Women - 100% Authentic

  • Testers are even more discounted than the fancy boxed versions and are great if you don't have a need for the fancy packaging. Testers are 100% authentic, fresh and completely full just like the original fragrance, however they are meant for the counter in a department store. Testers often come in a plain white box but sometimes they do not have a cap or box.The savings on the packaging means you save even more!.
Check Stock

Wire Tracker, RJ11 RJ45 Cable Tester Line Finder Multifunction Wire Tracker, Telephone Line Tester, Toner Ethernet LAN Tester for Network Cable Collation, Continuity Checking

  • ...irs. It is suitable for tracking RJ45 internet cable, RJ11 telephone line, and other metal wires in low electricity. Note: maximum currents for emitter and receiver are 10mA and 30mA respectively, and maximum voltage is 10V. TONE and CONT indicators do not indicate the working status but the measuring result..
  • ✅【Network Cables Verifying】Plug one side of the cable into the emitter and the other side into the receiver. Select “Network” to check and verify whether the network cables are good or not. The work of the telephone line of the detection of various states, only the transmitter can be detected, such as determining TIP or PING line, to determine the work of the telephone line idle, ringing, and off-hook state..
  • ✅【Wire Tracking】It can trace not only Ethernet LAN wires, but also electrical and speaker wires when connecting to the alligator clip. In this situation, the wires must be in power-off status, otherwise, the units will be damaged. It is recommended to stripe down some of the wires when connecting through the clip. Select “SCAN”. The emitter works properly if the “SCAN” indicator is on. Use the receiver to find target wires. No need for multi-testers..
  • ✅【Additional Earphone & Equipped Lamp】In a noisy environment, ....
Check Stock

Fluke Networks - 5018513 MS-POE-KIT MicroScanner Copper Cable Verifier & PoE tester for RJ-45 Category 5-6A Ethernet Cables, Includes IntelliTone Pro 200 & Remote ID Kit

  • ...lliTone Pro 200 Probe, RJ45 cord and adapters, magnetic strap, deluxe duffle bag, test kit pouch, (2) AA and (1) 9V alkaline batteries, user guide, 1 year warranty on testers.
  • Oversized backlit LCD screen displays clear results in bright light or complete dark with intuitive icons, supports Class 1 to 8 PoE, detects network switch speed capabilities up to 10G Ethernet, cable length, wiremap, cable ID, and distance to fault, detects POTS.
  • Test voice/data/video cables with integrated RJ45 which support low voltage testing with no need for adapters, ensures high quality installations and quick troubleshooting in active network environment, measures length (460 meter or 1500 feet with resolution to 0.3 meter or 1 foot), wiremap to TIA 568A/B standards, included remote ID locators.
  • Rugged and ergonomic easy grip rubber design with strong magnetic strap, locates virtually any cable or wire pair with IntelliTone digital and analog toning, probe included.
Check Stock

ALL-TEST PRO Motor Genie Deenergized Motor Circuit Analysis Testing Instrument

  • Accurate measurement: In order to improve the accuracy of voltage measurement,Battery capacity testers circuit is specially designed for DC bias. When the terminal is not connected at all, it will display a small voltage, which does not affect the actual measurement.
  • Size:Discharge testers board size is 5x3.4 cm/1.97x1.34 inch, small, easy to carry and store.
  • Power supply voltage:Battery capacity meters power supply voltage: DC4.5-6V (micro USB interface), working current: less than 70mA. Supported current: no more than 3.000A resolution 0.001A.
  • Discharge voltage:Battery meter testers discharge voltage: 1.00V-15.00V, resolution 0.01V. Termination voltage range: 0.5-11.0V.
  • Battery capacity:Battery meters battery capacity range: 9999Ah (1Ah=1000mAh). When the value is large, it is switched by the decimal point shift. When it is lower than 10Ah, it is displayed as X.XXX, and when it reaches 10Ah, it is displayed as XX.XX..
Check Stock

Triplett 2,000 Count High Performance CAT IV Digital Multimeter - High Contrast LCD Display | AC & DC Voltage & Current, Resistance, Continuity, Diode Test, & Capacitance | Impact Resistant - (9007)

  • ...it resolution with large 1.4” backlit display.
  • AC/DC Voltage to 600V and AC/DC Current to 10A.
  • Temperature, Frequency and Capacitance measurement. CAT III 600V, Data Hold, Auto power off, and Low battery indicator.
  • Founded in 1904, U.S.-based Triplett Test Equipment continues to be on the leading edge of specialized testers. Whether supplying vital test equipment to the U.S. Signal Corps during WWII, or providing the railroad industry with essential testers to ensure the safety of their crews and the public, Triplett prides itself on developing innovative, reliable, and durable test equipment that also won't break the bank. Triplett’s catalog contains a wide array of test equipment parts and accessories such as multimeters, voltmeters, cable testers, security cameras and security camera accessories, wire cable mapping kits, video monitors, and other specialty testers. We serve industries such as HVAC, security, electronics and electrical, telecom, and more..
Check Stock

Wire Tracker, ELEGIANT RJ11 RJ45 Cable Tester Line Finder Multifunction Wire Tracker Toner Ethernet LAN Network Cable Tester for Network Cable Collation, Telephone Line Tester, Continuity Checking

  • ... other metal wire in low electricity. Please note that it can not be used to track wires with high electricity ( maximum currents for emitter and receiver are 10mA and 30mA respectively, and maximum voltage is 10V ). Besides, you may need two 9V laminated cells, which are NOT included in the packaging of this item..
  • Network Cables Verifying. Plug one side of the cable into the emitter and the other side into the receiver. Select "Network" to check and verify whether the network cables are good or not. No need of network tester..
  • Wire Tracking. It can trace not only Ethernet LAN wires, but also electrical and speaker wires when connecting to the alligator clip. In this situation, the wires must be in power-off status, otherwise the units will be damaged. It is recommended to stripe down some of the wires when connecting through the clip. Select "SCAN". Emitter works properly if the "SCAN" indicator is on. Use the receiver to find target wires. No need of multi-testers..
  • Telephone Line Test. The work of the telephone line of the detection of various states, only the transmitter can be detected, such as determining TIP or PING line, to determine the work of the telephone line idle, ringing and off-hook state..
  • Additional Earphone & Equipped Lamp. In a noisy....
Check Stock

RJ45 Cable Tester Network Cable Tester Ethernet Wire Test Tool for LAN Phone RJ45 RJ11 RJ12 Cat5 Cat5e Cat6 Cat6a Cat7 UTP/Shield Cable

  • ... lines.(battery not included,require 1 piece 9V 6F22 battery).
  • Automatic Operation- Inserting the cables, this cable tester will run automatically, the LED light will display status, any troubleshoots such as the short circuit, open circuit, cross line ,can be found rapidly and easily..
  • Can BeTested Remotely-Our rj45 network cable tester is convenient to hold in hand for its mini size and it comes apart :master unit and remote unit. so you can test even when the cable's ends are in different place, as long as if the distance within limited circle of about 100 meters..
  • Gold-plated Shielded Socket-This RJ45 cable tester uses a gold-plated shielded socket, which will not rust, has stronger oxidation resistance, is more resistant to plugging and has a longer service life..
  • Durable and Sturdy-the outer shell of our network cable tester is made of environmentally friendly high resin, which has drop resistance, and durability.We change newly-created lighting emitting diodes from traditional LED for manufacturing a host of RJ45 RJ11 cable testers, which is conducive to distinguish clearly and quickly positions of wrongly-configured wires..
Check Stock