Reviews Network Test And Measurement

Tone Generator Kit, Wire Tracer Circuit Tester, 200EP High Accuracy Cable Toner Detector Finder Tester, Line Finder ,Inductive Amplifier, Probe Kit with Adjustable Volume for Network Cable Collation

  • 【Widely Application 】 200EP Tone generator and probe kit with probe are widely used in the maintenance of cables and wires. The measurement area includes line tracking, short circuit test, clear/busy/ringing identification. Essential tool for electricians..
  • 【Safety and Easy To Use 】This tone and probe kit is made of high-quality materials, wear-resistant, corrosion-resistant. Resistive plastic carbon-fiber tip prevents accidental shorts when probing wires. Make it safer to use..
  • 【 Professional 】When used in conjunction with any tone generator, professional wire toner probe kit with adjustable volume is designed to identify and trace wires or cables within a group without damaging the insulation. The clamp mode can be used for direct measurement of non-terminal cables, as well as for telephone and network line measurement..
  • 【Powerful Functions】The clamp mode can be used for direct measurement of non-terminal cables, as well as for telephone and network line measurement..
  • 【Warm Tip】This device is mainly to measure non-energized Cable, or low-voltage situation less than 24V .For any reason you are not satisfied, you can request a free replacement or a full refund..
Check Stock

Network Cable Tester, Network Tester with TDR, Network Toner Tester with AC Filter, AT278 Multi-Functional Wire Tracker for RJ45, RJ11, BNC, Metal Cable, PING/POE

  • ⏩【Fault Distance Measurement】Our Network Cable Tester utilises TDR theory to accurately measure cable length with visual length graphics and provide distance to fault information. Display graphical wire mapping, opens, shorts. BUT PLEASE NOTE: our device works by TDR theory, which is mainly to test long cables. If cable is ＜20m, it will display cable is too short or open. Thus, when measure length, pls try a long cable, for other functions, short cables are acceptable. pls kindly notice this..
  • ⏩【POE Testing】AT278 Network Cable Tester can detect Ethernet network for POE(Power over Ethernet) existence and to know which pins are providing power and detect how much voltage..
  • ⏩【PING Function 】AT278 Cable Tester is designed for testing network performance, data packet, min & max time. Test the reachability of a host on an Internet Protocol(IP) network. It reports errors, packet lost, and a statistical summary of the results, including the minimum, maximum, the mean round-trip times..
  • ⏩【AC Filter】Trace cables with AC fliter, quickly find the targeted cable without AC noise. Available on common switch & PoE Switch. Also, it is safe to find cable in standard types of PoE switches, which won’t burn out the device..
Check Stock

NanoVNA Vector Network Analyzer Testboard Kit for NanoVNA NanoVNA-F NanoVNA-H NanoVNA-H4 Network Analysis Test Board Demo Board

  • This test board contains a plug-in test circuit suitable for VNWA Testboard, and a set of 0805 and 1206 patch test circuits are added..
  • Suitable Model: This test board kit is used for NanoVNA NanoVNA-H NanoVNA-H4 NanoVNA-F series vector network analyzer user-friendly measurement....
  • DIY kit,stable performance, high accuracy, high sensitivity.Made of fine quality material, has a long service life..
  • What you can get: The package includes Testboard x1, 6X SMA Female Adapter , 4x 6mm Copper Stud, 4x M2.5 Screw , 2x 40pin Round Socket ,2x 0805 49R9....
  • Please Note: Due to the SMT circuit cannot fully consider all kinds of test situations, some parts of the test may need to be cut over. Please ensure....
Check Stock

Rsrteng IPC-9800MOVTADHS Plus+ Full Features CCTV Camera Tester 7-inch IPS Touch Screen Monitor CCTV Tester with HD-TVI HD-CVI AHD SDI IP Camera Support DMM OPM VFL TDR Features POE 4K H.265 HDMI

  • ...pe.Support Coaxial UTC control & call OSD menu,RS485 control,compatible with more than 30 protocols such as for PELCO-D/P etc. With Cable tracer, can quickly find out the target cable(BNC cable, network cable and telephone cable) from the mess cables..
  • 【DMM&OPM&VFL&TDR Test】Digital Multimeter---DC and AC voltage measurement,Resistance measurement,Continuity test,Diode measurements,Capacitance measurement.Optical Power Meter---Calibration wavelength:1625nm,1550nm,1490nm,1310nm,1300nm,850nm. Red Visible Laser Light Source---Laser type:LD.
  • TDR cable Breakpoint Test---Measurable metal cable’s length and short circuit..
  • 【Battery & Quality Assurance】Built-in 7.6V/7800mAh/59.28Wh battery.DC5V/2A,12V/3A,24V/2A,48V POE power output.After charging 4 hours, normal working time 15 hours.Tester Dimension/Net weight 9.4 x 5.3 x 1.4 inch/0.94kg(2.31lbs).Continue to browse our web page to get more detailed parameters.We tested every cctv camera tester before sent it,to ensure that you will not receive defective products.We offer 24h technical support and 1 year warranty.If there are any issues,pls feel free to contact us..
Check Stock

WANLUTECH OTDR Tester CCTV Tester, 1310/1550nm OTDR Fiber Optic Tester 8'' Touchscreen Built-in DMM OPM OLS VFL Event Map Support TVI CVI AHD IP CVBS Camera Test PoE/HDMI in/RJ45 Cable TDR Test

  • ✅【All-in-one OTDR Tester】WANLUTECH MT-8000 combines all necessary fiber optic testing in one handheld device.This OTDR tester includes Optical Time Domain Reflectometer (OTDR:1310nm+1550nm,28dB/26dB,max test distance can up to 110km), Visual Fault Locator (VFL:max test distance 8km), Optical Power Meter (OPM:measurement range -70~+10 dBm), Light Source (CW,270 Hz, 330 Hz, 1 kHz and 2 kHz),Digital Multimeter(DMM) , Optical Loss Test, RJ45 cable test, Event Map, etc..
  • ✅【Professional OTDR Fiber Optic Tester】WANLUTECH OTDR tester uses automatic testing by default, just click to start testing after connecting into the fiber, there is no complicated parameter setting.
  • professional technicians can set the test range, pulse width and other parameters before testing, which will get more accurate curve results.Warning function could prevent OTDR module from being damaged by optical signal in fiber..
  • ✅【Parameters】WANLUTECH multifunctional Single Mode OTDR has 8'' retina touch screen, 2048*1536 resolution. OTDR fiber tester is powered by 7.4V/7000mAh Li-polymer batter with long working time.Interface type:FC-PC.1310nm/1550nm Testing Wavelength and 28....
Check Stock

Tone Generator And Probe Kit, Wire Tracer, Network Cable Toner And Tester, Wire Tracker Circuit Tester 200EP High Accuracy Cable Tester Detector Finder Toner Inductive Amplifier with Adjustable Volume

  • 【About Details 】The gain is norminal 30dB, the input impedance is nominal 100M Ohm, and please notice that wire tracer needs one 9V Battery(NOT INCLUDED)..
  • 【Measuring Range 】 Measurement categories include line tracking, short circuit testing, clear/busy/ringing identification. Selectable continuous or variable tone generator.
  • 【Clamp Mode】 For non-terminal cables, clamp mode can be used for direct measurement, as well as for telephone and network line measurement..
  • 【High Accuracy】 With optional continuous or adjustable generator, the method is simple and the test results are accurate..
  • 【Avoid Short Circuit 】 Built-in speaker tube on the probe, insulation probe and built-in loudspeaker can effectively avoid short circuit of conductor and make it safer to use..
Check Stock

Tone Generator Kit, Wire Tracer Circuit Tester, Tone Tracing Probe Kit, 200EP High Accuracy Cable Tester, Line Finder Toner Inductive Amplifier Variable Tone Generator for Network Cable Collation

  • ...ire tracker needs two 9V batteries(NOT INCLUDED)..
  • 【Powerful Functions】When used in conjunction with any tone generator, professional wire toner probe kit with adjustable volume is designed to identify and trace wires or cables within a group without damaging the insulation. The clamp mode can be used for direct measurement of non-terminal cables, as well as for telephone and network line measurement..
  • 【Safety and Easy To Use】Circuit tester has spring-loaded ON/OFF button.
  • recessed terminal ports for handset connection.
  • resistive plastic carbon-fiber tip prevents accidental shorts when probing wires. The method is simple and the test results are accurate. Insulation probe and built-in loudspeaker can effectively avoid short circuits of conductor and make it safer to use..
  • 【Application Range】200EP Tone generator and probe kit with probe are widely used in the maintenance of cables and wires. The measurement area includes line tracking, short circuit test, clear/busy/ringing identification..
  • 【100% Money-Back Guarantee】For any reason you are not satisfied, you can request a free replacement or a full refund. If you have any questions about the product, please feel free to contact us. We will reply withi....
Check Stock

Thometh Multitester-MLC500 LC Meter 500kHz Digital Capacitance Inductance Meter Auto Ranging Component Tester, Black

  • ...cy (100Hz, 120Hz, 1kHz, 10kHz). Test signal level (0.1Vrms, 0.3Vrms, 1Vrms). Maximum test speed: 20 times/s. Constant 100Ω output impedance. Auto LCR..
  • 2.8-inch TFT LCD display. High-brightness white backlight. Data hold. Recording mode. Standard Mini-USB communication interface. SCPI command set. Perfectly fit the measurement and screening of inductance, capacitance, and resistance in production lines, maintenance points,etc..
  • Built-in rechargeable battery with large-capacity. 8h long battery life. For evaluation of resistance, parameters of capacitors, inductors, magnetic cores, resistors, piezoelectric devices, transformers, chip components, network components, circuit boards, relays, switches, cables, batteries, etc..
  • Reliable & Easy to Use. LED alarm for tolerance. Certified CE and RoHS. What you get: 1 x UT622A LCR meter, 1 x power adapter (5v/1a), 1 x UTR-002 Alligator clip test leads with rubber plugs (pair), 1 x UTR-001 plated short circuit board, 1 x USB cable, 1 x paper manual (En), 1 x gift box..
  • UNI-T WARRANTY – A trouble-free experience with 100% 18-MONTH WARRANTY and 100% MONEY BACK GUARANTEE by UNI-T Direct!.
Check Stock

TREND Networks | R151006 | NAVITEK NT PRO |Touchscreen Copper and Fiber Network | Includes Network Service Detection,Traffic Monitoring & Built-in PDF Reporting

  • DEPEND ON US: At TREND Networks (formerly IDEAL Networks), our mission is to innovate test solutions that are fast, accurate, and empower network technicians, data installers, and system integrators to better power up their world.
  • NAVITEK NT: This device offers a comprehensive suite of test and troubleshooting functionality for copper and fiber networks. The flagship of the NaviTEK range includes a fiber optic cable interface, loopback, and autotest functionality.
  • ADVANCED WIREMAPPING: NaviTEK NT PRO has advanced wiremap functionality for miswires, split pairs, opens, and shorts. It can also let the user know the distance to opens and shorts using TDR.
  • FEATURES: See detailed network parameters at the touch of a button, including PoE/PoE+ load testing, CDP/LLDP/EDP port information, and VLAN detection and operation.
  • TEST PERFORMANCE: This device simulates actual network traffic and will display a list of IP and MAC addresses of devices connected to the network. The Network Probe feature provides detailed network information of each device. Features 802.1x protocol login.
  • REAL-TIME REPORTS: Connects easily to the free AnyWARE mobile app. Generate test reports in PDF or CSV format and store up to 5000 test reports.
  • INCLUDES: The package includes the 1 x NaviT....
Check Stock

Internet Speed Test App - FREE

  • Ping test - Network delays test between device and internet.
  • Jitter test - A variation of the network delays.
Check Stock