Reviews Network Synchronization Testers

USB Wireless Bridge, 300Mbps Wireless WiFi Amplifier, USB Powered Router WiFi Repeater, WiFi Bridge Dongle, Wireless Access Point, Portable Hotspot Extender

  • 802.11b/g/n Standard - Adopting 802.11b/g/n standard to achieve faster data transmission and more stable, smoother internet..
  • Auto Scanning WiFi Hotspot - After turning on, it will auto scan wifi hotspot nearby and recommend the strongest signal for connection..
  • 300Mbps Data Transmission - This USB wireless bridge adopts 300Mbps data transmission speed to create a smooth and super fast internet..
  • Safe Network - Multi-level protection of SSID Concealing, WPA-PSK/WPA2-PSK, WPA/ WPA2 ensure the safety of your network. Protect it from network stealing..
  • Simultaneous 20 WiFi Ends - The router wifi repeater supports synchronization of 20 wifi ends. You can connect up to 20 wifi devices to it at the same time to achieve super cool surfing the internet..
Check Stock

KKnoon Circuit Breaker Finder - Multifunction Network Cable Tester for CAT5/CAT6,Ethernet Cable Tester with Multimeter,Poe Circuit Tester,Test Fault Distance Location and Length Measurement

  • ...lti-Function Circuit Breaker Finder】 Including poe tester,Anti-disturbance cable scanning,continuity tester, voltage testing,Fault distance location,port flashing,Vibration Mode,Volume adjustment, multimeter, cable length testing, and LED flashlight function..
  • 【3 Modes Network Cable Scanning】Circuit breaker finder has a Unique Anti-disturbance digital scanning mode, analog mode, Poe mode.1500m Max audio transmission distance.16-20VP-P super strong signal to cable tracer.You can set the frequency, and three modes can be switched freely..
  • 【Multimeter】The breaker finder with all in one multimeter with DC AC Voltmeter and Ohm Volt Amp Tester.
  • Circuit tester measures voltage , Current.K-type probe to measure temperature 20-1000℃,AC Voltage, Current testing range 4-400V,1.0A-10A.NCV power display and diode testing..
  • 【Poe testing & Hub Blink】The K618 network cable tester can identify pins that are providing power and detect how much voltage, Locate network port by the flashing port light (blink every 1 second) on Hub and Switch. Available to 500M Hub/ switch. The measurement area includes circuit tracer, short ....
Check Stock

Waterproof GT88 NFC Bluetooth Smart Watch Phone Mate For iphone Android Silver

  • Network type: GSM / GPRS 850/900/1800 / 1900MHz.
  • Entertainment: MP3, MP4, AVI format for local playback, Bluetooth music playback..
  • Simple pairing with your smartphone with the help of Bluetooth or NFC Connection. Magnetic charging to make your devices more safe in which someone is....
  • Compatible with most iOS and Android devices with multi-functions including sedentary reminder, sleep monitor, remote camera, music player, calendar,....
Check Stock

SC/UPC Fiber Optic Attenuator 10dB, 2 Pack，in-Line Attenuator, Male/Female, Single-Mode Fixed, dB Options: 3dB, 5dB, 7dB, 10dB

  • ✅SC/UPC Fiber Optic Attenuato: SC/UPC Male to SC/UPC Female, 10dB, Singlemode fixed, Ceramic Core material, 2 Pack. Provide SC adapters to ensure the connection between fiber patch cable..
  • ✅Low Insert-loss & High Return-loss: Polarization dependent loss ≤0.2dB and Return Loss: ≥ 50dB. Using an attenuator to prevent over saturating an optical receiver when the optical power is too high and ensures low bit error rates preventing damage to receiving fiber optic equipment..
  • ✅Good Repeatability & Intercalation: Widely used in Optical Fiber Distribution Frame, Optical Communication Network, Optical Fiber Broadband Access Network, Optical Fiber CATV, Optical Fiber Testers, FLAN, the performance is stable and reliable..
  • ✅Feature: Light weight, small volume, high accuracy, good stability and convenient operation..
  • ✅Attenuator Application: Optical attenuator is a passive device used to reduce the power level of an optical signal. It is generally used in single-mode long-haul applications to prevent optical overload at the receiver..
Check Stock

Ubrand Network Cable Tester, RJ45 RJ11 Multi-Function Wire Tracer and Circuit Tester with Earphone for Cable Collation, Network & Telephone Line Test, Red

  • MULTI-FUNCTION CABLE TESTER NETWORKING TOOL - Quickly find breaks without damaging the wire's outer skin. When connecting to the alligator clip, the cable tester can trace not only Ethernet LAN wires, but also electrical and speaker wires. Note: The wires must be powered-off when performing this search..
  • EASY TO OPERATE - There are only 2 buttons on the transmitter, "Function Select" and "Function Switch" and 1 button "Push to Test" on the receiver. Indicators such as "SCAN" and "TEST" are easy to identify..
  • WIRE TRACKING - Wire Tracking: Connect the wires to the transmitter via alligator clips. Select "Scan". If the "STATUS" light is ON, the transmitter is operational. Use the receiver to find the target wire. No additional testers are required..
  • NETWORK LINE TEST - Network Line Test: Plug one side of the cable into the transmitter and the other side into the receiver. Select "Test" and if the "VERIFY" light is ON, the transmitter is functioning properly. Identify circuit problem within a large number of cables..
  • DESIGNED WITH EARPHONES - Using the earphones, you can get clear information in noisy environments, and adjust the volume knob for proper volume to avoid interference..
Check Stock

Triplett CamView IP Pro Rugged IP and Analog NTSC/PAL Camera Tester with Built-in DHCP Server (8070)

  • Triplett CamView IP Pro+ All-in-One IP, NTSC/PAL, AHD, and TVI Camera Tester with Built-in DHCP Server (8071).
  • No need to buy multiple testers, the CamView IP Pro+ works with the most popular IP cameras, plus NTSC/PAL, AHD and TVI Analog cameras (IP camera must be ONVIF compliant).
  • the built-in DHCP server allows you to Set and Assign IP addresses to cameras, Auto-detect IP settings on networks, Ping, Sniff, List Subnet.
  • Record, save, and export full IP camera reports.
  • IP Camera Tests include Discover the Camera, View Camera's Video, Configure Camera's Parameters, and more.
Check Stock

MC14046BCP Phase Lock Loop (PLL) IC 1.9MHz 1 16-DIP (0.300\

  • ... requirements of JEDEC Tentative Standard No. 13B, "Standard Specifications for Description of 'B' Series CMOS Devices".
  • A Versatile Building Block for Micropower Digital and Analog Applications, Example Applications: FM demodulator and modulator, Frequency synthesis and multiplication, Frequency discriminator, Data synchronization, Voltage-to-frequency conversion, Tone decoding, FSK - Modems, Signal conditioning,.
Check Stock

Alfred SUNG by Alfred Sung Eau De Toilette Spray (Tester) 3.4 oz for Women - 100% Authentic

  • Testers are even more discounted than the fancy boxed versions and are great if you don't have a need for the fancy packaging. Testers are 100% authentic, fresh and completely full just like the original fragrance, however they are meant for the counter in a department store. Testers often come in a plain white box but sometimes they do not have a cap or box.The savings on the packaging means you save even more!.
Check Stock

1pcs/lot Brand CD4HC7046AE 74HC7046 DIP-16 Phase-Locked Loop

  • ... requirements of JEDEC Tentative Standard No. 13B, "Standard Specifications for Description of 'B' Series CMOS Devices".
  • A Versatile Building Block for Micropower Digital and Analog Applications, Example Applications: FM demodulator and modulator, Frequency synthesis and multiplication, Frequency discriminator, Data synchronization, Voltage-to-frequency conversion, Tone decoding, FSK - Modems, Signal conditioning,.
Check Stock

Wire Tracker, RJ11 RJ45 Cable Tester Line Finder Multifunction Wire Tracker, Telephone Line Tester, Toner Ethernet LAN Tester for Network Cable Collation, Continuity Checking

  • ...irs. It is suitable for tracking RJ45 internet cable, RJ11 telephone line, and other metal wires in low electricity. Note: maximum currents for emitter and receiver are 10mA and 30mA respectively, and maximum voltage is 10V. TONE and CONT indicators do not indicate the working status but the measuring result..
  • ✅【Network Cables Verifying】Plug one side of the cable into the emitter and the other side into the receiver. Select “Network” to check and verify whether the network cables are good or not. The work of the telephone line of the detection of various states, only the transmitter can be detected, such as determining TIP or PING line, to determine the work of the telephone line idle, ringing, and off-hook state..
  • ✅【Wire Tracking】It can trace not only Ethernet LAN wires, but also electrical and speaker wires when connecting to the alligator clip. In this situation, the wires must be in power-off status, otherwise, the units will be damaged. It is recommended to stripe down some of the wires when connecting through the clip. Select “SCAN”. The emitter works properly if the “SCAN” indicator is on. Use the receiver to find target wires. No need for multi-testers..
  • ✅【Additional Earphone & Equipped Lamp】In a noisy environment, ....
Check Stock