Reviews Nc Terminal - BestBuyersPro.com

Functional Devices RIB2401B Power Relay, 20 Amp SPDT, 24 Vac/dc/120 Vac Coil, NEMA 1 Housing

Product Type: Power Relay with Terminal Wires.
Easy to use: Attached with crimping terminals wires for worry-free installation..
Package Content : 2 x Power Relay, 10 Terminal Wires.

Body size: 20*10*6mm (0.78*0.39*0.23 inch).
Pack of 10. Can be used in various mechanical to control the position of moving parts of machines and plant.

...switch with wire, 5 red cap and 5 black cap switches, they have two connection points, and all use heat shrinkable hot solder wire, with good reception . Action type: Momentary button.
Contact type: NC (normally closed), press -ON, release -OFF..
★The momentary switch 12V nc's wiring and voltage: 120mm solder wire terminal.
excellent wire setting, make the soldering of each wire clear and easy. These have a smaller diameter button and the nut and washer are removable. The power switch button Rated Voltage: AC 250V/1A.
★Easy installation and compact size: exquisite momentary button switch micro, very easy to install, durable, Momentary button waterproof is suitable for the construction of small cars and DIY PC simulators. For 6.9mm/0.27".
★ Wide range of uses: The momentary switch 12V push button is used for circuit control of the circuits of household appliances, automobiles, computers, coffee machines, industrial equipment, etc., for motorcycles, garage door openers, etc..
★Package content: 5x Red Hat + 5x Black Hat Momentary switch push button.
If you have any problem during use, please contact me in time, we will solve it ....

High Quality: Made of High quality 304 Stainless Steel material, strong and durable, High grade appearance and nice touch feeling..
Waterproof design: Adopt rubber ring and hexagonal nut fixed, waterproof and dustproof can be used in wet or dusty enviroment..
LED voltage: 12V, Light Color: Blue, Hole size required 19mm, Switch Rating:5A/250VAC, Silver contacts and Gold plated terminal for good conductive....
Momentary type: push it -- ON, Release it -- OFF, Contact Configuration: 1NO 1NC, Terminal number: 5..
Widely Application: can be applied to car motorcycle modificine, electric equipment ,appliance, machine ,home Lamps and so on. With wire socket plug....

24-pins Standard ATX Connector, support 20 / 20+4 / 24 pins wire header. With latching button switch to control ATX power supply output ON/OFF..
Total 16 LEDs, it is convenient for you to diagnose the functions of all pins except COM/GND, therefore, if the output of any one wire of your ATX power supply is faulty, it can be seen at a glance..
High quality screw terminal blocks. Each terminal position support current output maximum 10 Amp. Pitch 5.0mm/0.197 inch, Wire range 26AWG to 12AWG / 2.5mm square..
Packing list: 1x Diagnostic breakout board, 4x Screws, 4x Nylon spacers..
Special Note: The PS_ON LED lights up when the output is OFF and goes out when the output is ON, this is just the opposite of the indication status of other LEDs. Since many new ATX power supplies no longer provide output -5V, the NC/-V LED will not light up when connected to this type ATX power supply..

Price For: Each Size: 30mm Standards: UL, CSA, CE Item: Contact Block For Use With: Schneider 9001K Series 30mm Operators Color: Clear Application: Operator Action: Momentary/Break Before Make NEMA Contact Rating Designation: A600/P600 Contact Rating: 10A @ 250VAC Terminal Connection: Screw/Clamp Contact Form: 1NC/1NO Country of Origin (subject to change): Mexico.

This Momentary Push Button switch Warranty 1 years . If there are quality problems within 1 years, you can send us email. We will send you new ones ..
Overall Size(not include button) : 11x 7.2 x 6.5cm/ 4.3" x 2.83" x 2.5" (L*W*H).
Package Content : 1 x Switch Box Station.

Package amount: you will be provided with 4 pieces microwave oven door switches, enough quantity can meet your daily use and replacement needs, and....
Product features: the black switch is characterized by being normally opened, which is that when normal terminal COM is connected to terminal NC, the....
Product model and compatibility: the model number of microwave door switch is KW3AT-16, and it can be compatible with SZM-V16-FD-63 SZM-V16-FA-63....
Use tips: the practical switch can be compatible with many microwave ovens, and if the microwave doesn't turn or heat properly, there may be a problem....
Detailed feature information: there are some detailed information of the switch, which are 16(4)A 125/250 VAC u, 10A 30VDC, 40T125, 5E4, the detailed....

Max. Load Voltage: terminal NC is DC 30V or AC 250V, terminal NO is DC 28V or AC 125V.
Functions: Supports on delay and off delay modes, the delay time can be adjusted from 0.1s to 1h, the delay mode and delay time can be set by shorting or opening the jumper pins and rotating the potentiometer..
Self Protection: Built with protection against reversal diode, supports anti-reverse protection. NOTE: Please remove the jumper cap of S5 when controlling AC current or DC current voltages other than 12V, otherwise the module will be burned or will not work properly..
Applications: This module works as a switch with time delay on and off function, highly recommended for automotive circuit modification, and LED lights, DC motors, pump and smart home control system..