Reviews Nc Deep Hole Drilling

NORTOOLS Drill Tap HSS Combination Drill and Tap Set with 1/4 Inch Quick Change Adapter,6-32 to 1/4-20 Screw Tapping bit Tool

  • ...ll, is more wear-resistant and prolongs the service life..
  • ✅【Standard sizes】6Pcs Combination Drill and Tap Bit, Inculued 6-32NC (3.5mm), 8-32NC (4.2mm), 10-32NC (5mm), 10-24NC (5mm), 12-24NC (5.7mm), 1/4-20NC (6.35mm), to meet your diversified requirements..
  • ✅【Applicability】Drill tap bits set suitable for drilling tapping cutting on light metal aluminum board iron etc. Deburr/countersink also provided on bit beyond back taper. 4341 material is suitable for wood, aluminum, iron and other materials with lower hardness. The 6542 material has high hardness and is more durable, and can be applied to steel plates, even thinner 304 stainless steel plates of about 2mm..
  • ✅【High efficiency】 Complete hole drilling, tapping, durable and countersinking in one operation and greatly save processing steps and time costs, improve working efficiency. Recommended for use it on a tapping machine. Pay attention to the operation method when using the electric drill. Excessive shaking and tilting will affect the tapping and even break the tap..
  • ✅【QUALITY GUARANTEE】 We have carried out strict quality inspection and control on each drill tap bits set before leaving the factory, and the pass rate is above 99.99%. If you have any usage or quality problems, ....
Check Stock

Irwin Tools Tap and Drill Sets, 13-Pieces

  • This tap and drill bit set produces a thread that is strong and easy to tap.
  • High-carbon steel plug taps are great for general-purpose threading.
  • 135° split-point drill bits give fast, precise drilling.
  • Set pieces: 6 – 32 NC, 8 – 32 NC, 10 – 24 NC, 10 – 32 NF, 12 – 24 NC and 1/4″ – 20 NC plug taps and 7/64″, 13/64″, #29, #25, #21 and #16 drill bits, plus a T-handle tap wrench.
Check Stock

6 Packs Combination Drill & Taps Bit Set, Screw Tapping in SAE Size 6-32nc 8-32nc 10-32nc 10-24nc 12-24nc 1/4-20nc with Anti-Rust Black Coating, 1/4” Hex Shank and Storage Case

  • COMBINE DRILL and TAP at the same time - All in one and works great and save a lot of time and trouble when doing threads for hinges or other projects.
  • No more using a drill to drill the hole and then tapping it out later with another tool..
  • HIGH VERSATILITY – Set of 6 drill tap bits in SAE sizes 6-32NC, 8-32NC, 10-24NC, 10-32NC, 12-24NC, ¼-20NC, with 1/4inch hex quick-change shank, fit Electric hand drill, impact drill, bench drill, electric screwdriver and other tap machines..
  • HANDY TOOLS – These drill-tap bits are must have if you fabricate a lot.
  • you can use them in aluminum, plastic, wood and other thin soft material metal panel.
  • When you use it, make sure it is perfectly straight, take your time, go slow, use lubrication to prevent breaking the bit in the hole..
  • EASY TO USE - Each tap drill is engraved with its size convenient for you to choose the suitable size with a glance. A tapered end on hex shank can prevent excessive knocks.
  • Back taper exceeds the tap to prevent over-drilling and damage to the thread..
  • WORRY-FREE – This Drill Tap Bits set comes with a portable storage case for convenient use and store. If you encounter any problems in using the products, please feel free to contact us for satisfactory customer service..
Check Stock

6 Packs Titanium Combination Drill & Taps Bit Set SAE 6-32nc 8-32nc 10-32nc 10-24nc 12-24nc 1/4-20nc.

  • ...nch drill, electric screwdriver and other tap machines..
  • EASY TO USE - Each tap drill is engraved with its size convenient for you to choose the suitable size with a glance. A tapered end on hex shank can prevent excessive knocks.
  • Back taper exceeds the tap to prevent over-drilling and damage to the thread..
  • WORRY-FREE – This Drill Tap Bits set comes with a portable storage case for convenient use and store. If you encounter any problems in using the products, please feel free to contact us for satisfactory customer service..
Check Stock

JEFE HEX 5/16\ Hex Shank Titanium HSS Twist Drill Bits, 135 Degree Easy Cut Split Point Drill Bit for Steel, Copper, Aluminum, Zinc Alloy, Wood and Plastics, Packed in a Double Blister.

  • ...e hex tail has good impact resistance and fracture toughness. Rust-proof and corrosion-resistant, more wear-resistant and long lasting..
  • 【Multiple Application】The drill and tap set with high hardness, can easily work on wood, PVC, plastic, aluminum, copper and metal sheet etc. These metal drill bits suitable for drilling, tapping, deburring and countering holes..
  • 【High efficiency】 All in one, no need to drill a hole with a drill bit, and then knock it out with other tools, which improve work efficiency and greatly save a lot of time and trouble. Ideal for DIY projects, general building/engineering using and household maintenance and repair..
Check Stock

YDLQWCZ Combination Drill Tap Bit 6-32nc 8-32nc 10-32nc 10-24nc 12-24nc 1/4-20nc Set of 6 Screw Tap Bit 1/4 Inch Hex Shank HSS Spiral Flute Tapping Tool Set Kit Deburr Countersink Bit

  • ... M4 x 0.7, M5 x 0.8, M6 x 1.0, M8 x 1.25, M10 x 1.5..
  • Drill Tap Bits Set - Each tap drill has its corresponding size in the storage box, so you can choose the exact drill bit effortlessly. The 1/4" (6.35mm) hexagonal shank has a tapered end to prevent excessive knocking.The back taper exceeds the tap to prevent over-drilling and thread damage..
  • High Speed Steel 4341 Material - The surface of the titanium alloy combined drill bit is treated with titanium alloy, which effectively improves the cutting performance of the drill bit, is more wear-resistant, and prolongs the service life. Made of high-speed steel 4341, to ensure sharpness, speed, and maintain strength and efficiency..
  • Improve Efficiency - Drilling, tapping, deburring, and countersinking can complete the processing of copper, brass, aluminum, sheet metal, low carbon steel, and plastic at one time, improving work efficiency. Deepening the chip flute helps to remove the chips and debris on the tap, reducing friction and heat, so as to achieve a faster and colder drilling process..
  • Easy to Carry - This drill tap bits set is equipped with a storage box, which is convenient to carry and helps to keep the drill bit tidy..
Check Stock

szgate 5PCS Combination Drill Tap Bit Set Screw Tapping Hex Shank HSS MetricImperial Plug Drill Bits Hand Tools 6-32NC, 6-32NC (3.5mm)

  • The wide range of drill tap bit set helps you with tasks like drilling, tapping, deburring and countersinking, all with this single kit. The split point tip resists walking and penetrates faster into the material. Along with fast penetration, the power drill makes your life easy by saving your time and energy..
  • Durable taps are made from hardened high-speed steel (HSS ) vs carbon steel for longer life,which can drill, tap, deburr and counter holes on wood, copper, brass, aluminum, sheet metal and plastic.
  • This is a SAE drill tap set, so it has high versatility. Each tap drill is engraved with a label, which is convenient for you to choose the size that suits you. Quick Change ¼-inch (6.35mm) hex shank has a tapered end to prevent excessive knocks. Back taper exceeds the tap to prevent over-drilling and damage to the thread..
  • Can be used to tap various threads. including 6 SAE sizes: 6-32NC, 8-32NC, 10-24NC, 10-32NC, 12-24NC, ¼-20NC,1/4inch hex quick change shank fit Electric hand drill, impact drill, bench drill,electric screwdriver and other tap machine.
  • Easy to Carry and Use,As the Drill Tap Bits set comes with a portable storage case you can carry it anywhere you go. If you encounter any problems or are not satisfied with the products while usi....
Check Stock

Post Hole Digger

  • NEW 12" Auger Bit Fence Post Hole Digger - 32" Deep.
  • Perfect for Quickly Digging Holes to Install Fence Posts, Decks, Planting Trees, Shrubs, Ice Fishing Holes and More!.
  • Built Using Heavy Wall Tube for Maximum Strength Drilling.
  • Rugged and Durable for Quick, Clean, Professional Earth Hole Drilling.
  • Designed for Use with Most Standard Augers and Other Universal Drills.
Check Stock

LIONMAX Wood Screws #8 x 2 Inch, Pocket Hole Screws 300PCS with Coarse Thread, Washer Head Square Drive, Self Tapping, Zinc Plated, Rust-Resistant, 150MM Drive Bit Included

  • 【For Pocket Hole】: Optimized screws length and washer head is designed for invisible pocket hole. Avoiding over-drilling, and effectively predicted the screw position while drilling..
  • 【Square Drive】: Deep square of pocket hole screws wide contacts with drive bit, 4 square edges reduce torque for driving, avoids stripping at driving work..
  • 【Coarse thread+Self-Tapping】: Wood screws with coarse thread and self-tapping tip provide aggressive power for drilling, use for treated lumber, pilot hole needed..
  • 【Zinc Coated】: Zinc coating fully protects inside of the pocket hole screw, without peeling off, provides greater rust resistance..
  • 【Package】: #8 x 2 Inch Pocket Hole Screws 300 Pieces, 150MM Square Drive Bit Included..
Check Stock

6 Pcs HSS Drill Tap Bit Set, Titanium Coated Combination Drill & Taps M3, M4, M5, M6, M8, M10, 1/4\ Hex Shank, for tapping, drill a hole and cut new threads

  • The wide range of drill tap bit set helps you with tasks like drilling, tapping, deburring and countersinking, all with this single kit. The split point tip resists walking and penetrates faster into the material. Along with fast penetration, the power drill makes your life easy by saving your time and energy..
  • Durable taps are made from hardened high-speed steel (HSS ) vs carbon steel for longer life,which can drill, tap, deburr and counter holes on wood, copper, brass, aluminum, sheet metal and plastic.
  • This is a SAE drill tap set, so it has high versatility. Each tap drill is engraved with a label, which is convenient for you to choose the size that suits you. Quick Change ¼-inch (6.35mm) hex shank has a tapered end to prevent excessive knocks. Back taper exceeds the tap to prevent over-drilling and damage to the thread..
  • Can be used to tap various threads. including 6 SAE sizes: 6-32NC, 8-32NC, 10-24NC, 10-32NC, 12-24NC, ¼-20NC,1/4inch hex quick change shank fit Electric hand drill, impact drill, bench drill,electric screwdriver and other tap machine.
  • Easy to Carry and Use,As the Drill Tap Bits set comes with a portable storage case you can carry it anywhere you go. If you encounter any problems or are not satisfied with the products while usi....
Check Stock