Reviews Multi Spindle Automatic Machine

Stalwart 25 piece 4.8V Cordless Screwdriver with LED

  • ELECTRONIC SCREWDRIVER SET – This automatic screwdriver comes with 24 various screwdriver and drill bits, a convenient carrying case, and a charging cord, so you can be sure your mini drill is always charged and ready to go..
  • FORWARD AND REVERSE SWITCH – The electric screwdriver is equipped with a forward and reverse switch, great for drilling screws into walls and taking them out. With the comfortable soft grip handle, using the power screwdriver is a breeze..
  • AUTOMATIC SPINDLE LOCK – This electrical screwdriver features an automatic spindle lock that safely locks the drill bit in place, has a no-load speed of 180rpm, and comes with a LED work light on the head that makes it easier to see..
  • INCLUDED CARRYING CASE – The electrical screwdriver set comes in a convenient carrying case to keep all your tool bits protected and stored away in between uses. This case also makes it easy to take your driver with you on the go..
  • PRODUCT DETAILS – Materials: Plastic and Metal. Specifications: 4.8V. 25-Piece-Set of Screwdriver and Drill Bits with Included Carrying Case. Color: Red..
Check Stock

INTBUYING Inch and Metric Metal Lathe Benchtop Lathe Machine 8"X32" High Precision Mini Table Lathe 1100W Variable Speed 2500rpm MT5 Spindle Taper 110V

  • ...Metric/imperial/customized.❥This lathe is capable of adjusting set screws for accurate operation..
  • ⚙【High Precision Operation】High Precision three-jaw chucks with 125mm clamping diameter are used to clamp square and round materials firmly, we also offer optional four-jaw chucks.In the X axis direction can be automatic feed,Automatic feed speed can be adjusted,Automatic feed range reached 0.01mm-0.4mm.❥The tailstock is movable and fixed with a maximum center distance of 31.5 inch at the far right.With the MT2 taper in tailstock spindle..
  • ⚙【Variable Speed】The spindle rotation speed is divided into two adjustable gears, respectively 50-1250rpm and 1250 -2500rpm.The panel can observe the rotation speed in real time, which is flexible and convenient..
  • ⚙【Easy to operate】The Mini Lathe can switch between metric and inch systems without changing gears automatically❥.There are three ways to start turning: manual start, automatic start, delay automatic start.❥Indexing function: you can switch the direction of turning tool through "DIR" button.❥Angles can be cleared with one click.Control panel set parameters after saving and start can realize reciprocating turning function and turning thread..
Check Stock

LiFuJunDong 4 Axis USB CNC6040 Router Engraving Machine 3D Milling Machine w/Controller 110V 1.5KW VFD Water-Cooling Router Engraving Machines for Metal, Wood, Glass and Plastic (6040 1.5KW 4AXIS)

  • ... Aluminium alloy Max. Feeding height: ≤100mm Drive unit: X axis---1605 Ball Screws Y axis---1605 Ball Screws Z axis---1204 Ball Screws Sliding unit: X axis---High intensity Chromeplate shaft Y axis---High intensity Chromeplate shaft Z axis---High intensity Chromeplate shaft Stepping motor: 57 two-phase 3A 150N.cm.
  • SPINDLE MOTOR-1】 Outside dimension: 65*158mm Material: 304 stainless steel, Copper coil, Pressure cast aluminum pipe water jacket VOLTS, current, power: AC110V, 60Hz, 5A, 1.5 KW VFD Spindle motor: 1.5 KW Water Cooled Spindle speed: 24000 rpm Max working frequency: 400Hz Principal axis collet: ER11collet, Standard configuration :6mm Nut Model: ER11-A Cooling: Water-cooling Speed ​​mode: By adjusting the VFD output voltage and operating frequency from 0-24000RPM.
  • SPINDLE MOTOR-2】Lubrication way: lubricated by high grease Repeat accuracy: 0.05mm Spindle precision: radial beat acuities 0.03mm Carving Instructions: G code / TAB files / nc file / NCC files Communication interface: through USB connection with computer Working Speed: 50-1500mm / min (different material with different speed settings) Maximum Idle speed: 0-1500mm/min.
  • HIGHLIGHTS OF WATER COOLING SYSTEM 】It can cool the spindle and protect the machine Avoid the spindle burn o....
Check Stock

TECHTONGDA 30L Commercial Dough Mixer Machine Stainless Steel Stand Mixer Electric Dough Blender Heavy-Duty Pizza Dough Mixer with Double Action Double Speed Spiral Mixing for Bakery Food 110V 30L

  • @【Double Action】~ The dough bucket rotates while the stir bar rotates to ensure that the surface is more uniform. Doual speed adjustment, fast and slow speed can be adjusted, suitable for different kneading needs..
  • @【Automatic Power-off】~ Open the protective cover machine automatic power-off, and ensure the safe operation, but also prevent your hand into the accident. Compared with the traditional belt pulley speed changing, the gearbox speed changing of this dough mixing machine will not slip, which makes the mixer running more accurately, lower the failure rate..
  • @【Pure Copper Motor】~ 100% copper motor have good power, to ensure long-term operation and improve the service life of the machine. Machine spindle using German imports of machine processing, high processing precision, stable operation, low noise..
  • @【Widely Application】~This machine can dispose all kinds of dough products in the kitchen, making high-viscosity dough which really will provide you a nice taste. Widely used in bakeries, restaurants, pizzerias, commercial kitchen, and canteens..
Check Stock

Milling on the Drill Press (DVD, 4 Hours)

  • 【Much More Powerful】The motor power of RCOG-25V milling drilling machine has a 1100W brushless spindle drive motor providing tremendous torque and variable speeds from 50-22250 RPM continuously, with overload and overheating protection fuction.The noise of this motor is very low and it is very easy to maintain.So much power will make your work much more efficient..
  • 【Parameters】Metric Scale MT3 Milling Machine adopts high precision grinding all steel spindle with excellent strength grinding gear,X axis:18.9",Y axis:6.9",Z axis:11",it has own DRO for 3 axis.Headstock swivels 360 degrees.Max drilling diameter:0.9",Max Face screening capacity:2.5",Max vertical milling capacity:0.79",Distance from spindle to table:13.8",Spindle taper:MT3,Table size:27.5"x7.1".The speed display shows inch..
  • 【Micro-Feed Precision】Benchtop Milling Drilling Machine has a micro-feed function,the accuracy is up to 0.01'', only need to tighten the middle nut of the right hand wheel to achieve the micro-feed function, loosen the nut to achieve the manual up and down movement function.Integrated cross worktable,width is widened,with high pr....
Check Stock

RATTMMOTOR 2.2KW CNC Air Cooled Spindle Motor ER20 80mm Spindle 220V High Speed 24000RPM 3HP 400HZ for CNC Router Engraver Milling Cutting Machine

  • The 2.2KW air-cooled spindle motor's 220V, 8.5A, 400HZ frequency, less than 0.05mm runout off, 0-24000RMP speed..
  • It should be noted that the spindle speed must be kept above 9000 rpm, otherwise the spindle will be damaged..
  • It is mainly suitable for non-metallic engraving,such as wood carving/engraving machine, advertisement engraving machine,CNC machine..
  • This spindle is designed with a dustproof and waterproof cover, the body is made of stainless steel, and the rear is equipped with a cooling fan,....
  • It contains 4 bearings, high-precision grinding taper hole, high-precision, low noise..
Check Stock

Huanyang Water Cooled VFD Spindle Milling Motor 110V 1.5KW 24000RPM 400hz Φ80mm ER11 Collet for Wood Carving

  • The item is Water Cooled 110V-1.5KW 3 bearings Φ80mm spindle motor.(come with a 6mm collet).
  • NOTE:Need to be equipped with 110v 400hz variable frequency drive to use.Rated frequency of spindle is 400 Hz,If you input 220v voltage at 50hz or 60hz, it will damage the spindle..
  • stable performance,high precision bearing.
  • Application:wood carving/engraving machine, advertisement engraving machine,CNC machine, small sized processing center, high speed centrifuge etc..
Check Stock

110V 2.2kw vfd Spindle Package：110V 2.2KW VFD+110V 2.2KW Φ80mm ER20 Water Cooled Spindle Motor+110V Water Pump+80mm Clamp +5m Water Pipe

  • 【Connection way】The package only supports 110VAC(+/-10%) single phase voltage input, the input wire is connected to the R and S terminals of the....
  • 【Parameter Settings】All parameters have been set up, the customer can directly connect and start when receiving the product.
  • 【Package Include】1 x 110V-2.2KW VFD, 1 x 2.2KW Φ80mm 24000RPM ER20 Spindle .1 x 110V-75W Water Pump ,1 x 80mm motor clamp,1 x 5m Water Pipe..
  • 【Wide range of applications】The spindle motor applied to: wood carving/engraving machine, advertisement engraving machine,CNC machine, small sized....
  • 【Warranty】1 Year replace(The spindle is half a year). Spindle Warranty :Half a year If there is an alarm in the product and you do not know how to....
Check Stock

WuliFANX Mini Table Saw Liftable, Electric Mini Table Saw Stepless Speed Regulation LED Display, Handmade Bench Lathe Stainless Steel Integrated Spindle with Protective Plate

  • ...he saw blade is raised clockwise, and the saw blade is lowered counterclockwise.
  • the double marking of 0-180 degrees can meet the multi-angle cutting.
  • the reserved vacuum port can be connected to the vacuum cleaner. Dustproof.
  • the transparent protective plate is safe and reliable.
  • the stainless steel integrated car spindle tells the DC high-power motor gear to increase the torque transmission.
  • ○[INSTALLATION PROCESS]: For manual bench lathes, first the open-end wrench clamps the main spindle, the two-angle wrench covers the splint, and the thread splint is removed.
  • after connecting the steel sleeve and the spindle, tighten the screw with a wrench, and install the chuck and the grinding disc.
Check Stock

LuckyHigh Electric Dual 4-1/4' Polisher Buffer Bench Top Machine Variable Speed Mini Jewelry Bench Polisher for Jewelry, Wood, Silver, Amber Polishing

  • This buffer is used for polishing jewelry, aluminum, chrome, acrylic dental materials, metal parts or plastic parts..
  • This bench polisher has variable speed dial. Adjustable speed range 2000 -7000RPM(without any accessories). Different speeds to polish different materials..
  • The 2 black bonnets (Spindle Sleeves) are marked with “L” and “R”. “L“ bonnet (Spindle Sleeve) should be installed at left side of the machine, “R” bonnet (Spindle Sleeve) should be installed at right side..
  • This buffing machine is made with a stable cast iron base. The 4 rubber feet of the buffing machine keep it on a table or any workbench stablely..
  • This polishing machine comes with two tapered spindles for holding buffs and brushes up to a 4-1/4″ (108mm) in diameter..
Check Stock