Reviews Mould Product Plastic Cnc
SpeTool 5Pcs 2-Flute Square Nose Carbide End Mill 1/8 Inch Router Bit with 1/8 inch Shank CNC Machine Tools, TiAlN Coated
- ENDMILL SIZE. 1/8" shank, 1/8" cutting diameter, 1/2" cutting length, 1-1/2" over all length.
- SPECIFICATION. Flat top, 2-flute, HRC55 with tialn coated, use 1/8" collet.
- PREMIUM QUALITY. Made of high quality tungsten carbide, precision edge-grinding technology.
- excellent cutting results and enhanced productivity.
- WIDE APPLICATION. For cnc, engraving machine, carbon steel, mould steel, inconel, stainless steel, titanium alloy etc.
- suitable for side milling, end milling, finish machining, etc..
- PACKAGE INCLUDE. 5 pieces high quality end mill pack in a individual plastic box.
Check StockKibbeh Maker Meatball Mold Manual Meatloaf Maker Press Tool Meatball Mould Kibbeh Maker Mold 4 Grids icli kofte kalibi Meatball Size 3.15×1.77inch
- Making stuffed meatballs is much easier now. It is simple to use, anyone can use it very easily. 4 meatballs can be made at the same time. You only....
- Save your time. Kibbeh maker is simple to use, just put a plastic bag on it, then fill and press it. No sticky fingers and no rolling the meat in your....
- It is made of hard Composite Polymer material. The product consists of 3 parts. Lower mould, upper mould and pressing mould. Kibbeh maker mold is....
- Does not contain any substances that are hazardous to health. 100% BPA Free..
- Easy to clean. The simple design makes it easy to clean. It can be washed with soap and warm water and dishwasher safe..
Check StockRadius 0.5 1 1.5 2 2.5 3 Ball Nose Carbide End Mill Set CNC Cutter Router Bits 2 Flute Spiral Milling Tool
- 0.5-3mm Ball Nose Carbide End Mill: This end mill set includes 6 Radius sizes of 0.5mm, 1mm, 1.5mm, 2mm, 2.5mm, 3mm, satisfy your different needs..
- Material: Tungsten Carbide.2 Flutes.Max Cutting material hardness:HRC45..
- Coating witn TiAlN Can Cutting Harden materiel, 3 times Durable than Carbide..
- For CNC,Engraving machine.Carbon steel,mould steel,alloy steel,inconel,stainless steel,titanium alloy etc..
Check StockSilicone Planter Mold for Concrete Flower Pot Making, Square DIY Succulent Plant Cactus Planter Pot Mould, Homemade Cement Flowerpot Molding Tool (Type B - 12CM)
- ...face, easy to demold (demould need 24-36 hours)/ clean and re-use. (Note: If to make flower pot, please use Cement or concrete)..
- 【Square Mini Flower Pot Silicone Mould】- 1. Type A (10 CM): Mold Size about 11.2x11.2x10.5cm/ 4.4x4.4x4.13inch (LxWxH), Flower Pot Finished product size: 10x10x10cm/ 3.9x3.9x3.9inch (LxWxH).
- 2. Type B (12 CM): Mold Size about 15.5 x15.5x12.3 cm/6.1x6.1x4.8 inch (L x W x H), Finished Product Size: About 12x12x12 cm/ 4.7x4.7x4.7 inch(L x W x H). Perfect for small green leaf plant/ succulent/ Cacti and other mini size plants. DIY Flower Pot Model, add the happy feeling in daily life..
- 【Multi-usages Flower Pot Making Molds, DIY Silicone Planter Molds for Concrete Succulent Pots Making】- 1. This mold can be used to as cement/ concrete/ clay/ plaster/ polyester resin molding tool, to make succulent planters or containers.
- 2. Also can be utilized to making decorative crafts such as pen holders/ candles holder/ fleshy flower pots/ jewelry holders/ brush pot and many other DIY crafts. Garden Home Decoration Craft Concrete Planter Mold..
- 【Washable & Reusable Flowerpot Mould, Concrete Flo....
Check Stock3Pcs 14mm OD Hard Rigid Tube Bender Mould Tool Kit, Rigid Tubing 45/90/180 Degree Bending Kit, Acrylic Bending Jig Set, Hard Pipe Bend Die Tube Tool Suitable for Water Cooling System
- 【Bender Mould】3Pcs Hard Rigid Tube Bender Mould Kit is mainly used for angle setting. Heat the hard tube to a certain degree, then place the tube on the grinding tool at different angles to shape it, and the required angle can be bent.
- 【Wide Application】Hard tube/Acrylic tube bending tool set. Multi-angle acrylic bending mould for AWGM3 series, each group with a total of three. 45/90/180 curvature, suitable for 14mm rigid tubes.
- 【High Quality】 The tube bender is made of ABS plastic material, the angle of the positioning groove is precise, and the molds are mirror polished to ensure the best contact effect between the finished product and the tube body.
- 【Bending Tool】It is convenient and simple, a good helper for hot folding. The bending kit is an ideal tool for professionals and beginners, measuring / cutting / heating / bending. Need enough heat to bend (such as a heat gun).
- 【Note】This bending mould set is suitable for 14mm rigid tube, please check it before use. The heat gun must be used in a ventilated place, wear protective gloves and goggles. If you have any questions, please contact us.
Check StockSpeTool 14411 Ball Nose Carbide End Mill CNC Cutter Router Bits Double Flutes Spiral Milling Tool 1/4 inch Shank with 3 inch Over Length
- Solid Carbide Ball Nose Router Bit with 1/4inch Shank and 1/4inch Cutting Diameter, 1-1/8 inch Cutting Length, 3 inch for Total Length.
- Round Top with 2-Flute, Material: HRC55 Carbide with TiAlN Coated.
- For CNC,Engraving Machine.Carbon Steel, Mould Steel, Inconel, Stainless Steel, Titanium Alloy etc.
- The Route Bit Suit for CNC Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet.
- End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc..
Check StockSpeTool 5PCS 12401 4 Flutes Carbide CNC End Mill, Square Nose 1/4 inch Shank, 2-1/2 inch Long Overall, Titian Coated for Metal Mill
- Solid Carbide Spiral Router Bit with 1/4 inch Shank and 1/4 inch Cutting Diameter, 3/4 inch Cutting Length, 2-1/2 inch for Total Length.
- The End Mill With Flat Top, 4-Flute, For Finishing, Material: HRC55 Carbide with TiAlN Coated.
- For CNC,Engraving Machine.Carbon Steel, Mould Steel, Inconel, Stainless Steel, Titanium Alloy etc.
- The Route Bit Suit for CNC Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet.
- End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc..
Check StockSpeTool 5PCS Ball Nose End Mill Cutter CNC Router Bits Double Flute HRC55 Spiral Milling Tool 1/4 Inch Shank 2-1/2 Inch Length OVL
- 5PCS Solid Carbide Ball Nose Router Bit with 1/4 inch Shank and 1/8 inch Cutting Radius, 3/4 inch Cutting Length, 2-1/2 inch for Total Length.
- The End Mill Round Top with 2-Flute, Material: HRC55 Carbide with TiAlN Coated.
- For CNC,Engraving Machine.Carbon Steel, Mould Steel, Inconel, Stainless Steel, Titanium Alloy etc.
- The Ball Nose End Mill Suit for CNC Machine, Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet.
- End Mill Bits are Suitable for Side Milling, End Milling, Finish Machining, etc..
Check StockGarden Of Arts Ganpati Modak Mould/Modak Maker/Modak Sancha of Plastic Set of 2
- These moulds can be stored easily to save space and are very easy to wash and clean make your modak in the best shape.
- The Ganesh Chaturthi Festival is one festival we all have grown up with & so Bappa's favourite MODAK Mould is our offering This is a special neivedyam that's offered to Lord Ganesha on Ganesh Chaturti These moulds are made up high grade Plastic materials. The Outer layer is round but inner shape is of modak The Outer layer is round but inner shape is of modak.
- Shape with this exquisite different mould. Uses:-the ganesh chaturthi festival is one festival we all have grown up with & so bappa's favourite modak is our offering this is a special neivedyam that's offered to lord ganesha on ganesh chaturthi we are offering an elegant range of modak mould These moulds are made up high-grade plastic materials these molds can be stored easily to save space and are very easy to wash and clean make your modak in the best shape.
Check StockSpeTool 5Pcs/Set Flat Nose Double Flute Carbide End Mill 1/32' Cutting Dia Router Bits Cutter CNC Machine Tools for Carbon Steel Soft Alloy Steel Die Steel Tool Steel Cast Iron Wood
- SIZE. 1/8" shank, 1/32" cutting diameter, 5/64" cutting length, 1-1/2" over all length.
- SPECIFICATION. Flat top, 2-flute, HRC55 with tialn coated, use 1/8" collet.
- PREMIUM QUALITY. Made of high quality tungsten carbide, precision edge-grinding technology.
- excellent cutting results and enhanced productivity.
- WIDE APPLICATION. For cnc, engraving machine, carbon steel, mould steel, inconel, stainless steel, titanium alloy etc.
- suitable for side milling, end milling, finish machining, etc..
- PACKAGE INCLUDE. 5 pieces high quality end mill pack in a individual plastic box.
Check Stock