Reviews Motorguide Kayak Trolling Motor

Codinter Kayak Motor Mount, Trolling Motor Mount Kit for Sit-On-Top Fishing Kayak Scupper Holes/Kayak Mount Tracks

  • 【Two Install Scenes】 This kayak motor mount works with kayak scupper holes and parallel kayak mount tracks, such as sit-on-top kayaks and fishing kayaks, not for declining flush mount fishing rod holders in the kayak.
  • 【No Drilling Requires】 Installing this kayak trolling motor mount kit does not have to drill into your kayak hull, It’s easy to install just simply plug into the scupper holes or mount it on the track, it’s stable and tightened by the supplied ratchet strap.
  • 【Quality Materials】 The materials used to make this kayak motor mount bracket include anodized aluminum, UV stabilized reinforced plastics, and stainless steel fasteners, this kit is extremely durable and built to last for fresh or saltwater use.
  • 【Heavy Duty】 The mounts are designed to fit into kayak scupper holes / tracks that range from 3.54”-31.5” in width, the diameter of the poles is 1 inch. It can be rated to hold up to 66lb (30kgs) thrust trolling motors.
  • 【Motor Mount】 Suitable for mounting electric and petrol trolling motors either right or left hand side.
Check Stock

NyVoozy Transom Trolling Motor Mount for Kayaks, Trolling Motor Mount for Clamp-on Electric Trolling Motors, Maximum Trolling Motor Thrust of 62 Pounds

  • Adding the boat rudder to your boat trolling motor made the trolling motor more stable as trolling motors are known for lack of steering especially when the big wind picks up. With trolling motor stabilizer, even in the big wind, the direction is in your own hand, don’t worry rudder out of control any more. It is recommended using for towing motors which the biggest horsepower up to 3 HP or the biggest thrust up to 70 pounds, recommended the maximum weight for 55 pounds..
  • Our kayak rudder kit measures 3.75″ high x 4.75″ wide and suitable for a 23-32MM” shaft diameter which is boat rudder clamp compatible with most 24-55lb transom mount trolling motors. It’s commonly used for motor guide trolling motors, minn kota trolling motor, newport vessel trolling motor, etc. Designed for kayak, canoe, seayak, angling boat, etc..
  • It can last long time. And the screws are made from hight quality material which is one kind of anti-rust and resistant to hydrochloric acid corrosion material, so you could use it in the seawater..
  • Very easy to install, just with screws, you could install our trolling motor mount to trolling motor only a few minutes. Because of multiple pattern screws, so you could install it on all kinds of boats..
Check Stock

Chill Trax Pad for MotorGuide Tour Edition

  • marine non-skid traction pad designed to be used with the MotorGuide trolling motor.
Check Stock

MotorGuide 8M0092065 Trolling Motor Replacement Plug — Medium Duty, Use with 16- to 8-Gauge Wire, Connects with Receptacle

  • Provides sure and reliable power connection.
  • Intended for use with 16- to 8-gauge wire.
  • Connects easily with the MotorGuide Trolling Motor Receptacle (8M0092066.
Check Stock

Newport Trolling Motor Transom Motor Mount - Kayaks - Freshwater and Saltwater - 1 Size

  • 3 HORSEPOWER: The Newport Transom Mount is a 3 horsepower maximum rated product that is designed specifically for small outboard motors and transom trolling mounted trolling motors. This product is made from high quality materials and is designed for durability and performance..
  • CORROSION RESISTANT: Saltwater and Freshwater compatible, the Newport Transom Mount is a salt water and freshwater compatible transom mount that is designed for use with electric trolling motors. This transom mount is made of durable Aluminum and features a quick-release 4- bolt mount for easy installation and removal..
  • FITS MOST KAYAKS: Widely used 3.75" x 4.75" bolt pattern This transom mount is widely used for its 3. 75 x 4. 75 bolt pattern. It fits most outboard motors and trolling motors and fits majority of Kayak models. The Newport Transom Mount is made of durable aluminum..
  • REMOVABLE AND REPLACEABLE POLYMER TRANSOM PLATES: The Newport Transom Mount is a removable and replaceable polymer transom plate that can be easily installed on any boat. The plate is designed to provide a strong and durable mounting surface for a variety of out....
Check Stock

Bixpy J-2 Outboard Kit - Electric Boat Motor with Remote Control, Waterproof and Dirt-Proof, Adjustable Speed, Includes a Comprehensive Guide, Perfect for Kayak, Inflatable Boats, Jon boat etc

  • A complete Trolling Motor set-up : To be mounted on the rear or side of the boat, the Bixpy J-2 Outboard Kit is engineered to run at your desired speed and provide an unforgettable kayaking experience.
  • Compatible with a variety of Bixpy Adaptors for maximum functionality.
  • An In-Depth Manual : Includes a detailed, quick-start guide for your safety and understanding this kayak motor kit and all the included parts.
  • a super easy installation process helps you get out on the water in no time – Our motor is of high quality, high performance, compact, lightweight, and the installation process is quick and simple.
  • Set Includes : The kit includes the Bixpy J-2 Power Shroud Motor, Bixpy Outboard Battery (378 Wh), wireless remote control, a magnetic kill switch with a floating leash, universal 100 – 240V wall charger, an allen key, a 5ml tube of di-electric grease, and Bixpy vinyl decal.
  • Variable Speed : The device can operate at 12 forward speeds and 3 reverse speeds. The electric trolling motor runs for approximately 80 minutes at top speed and up to 12 hours at the slowest speed. The Bixpy motor is all controlled by a remote that fits in the palm of your hand.
  • No Unnecessary Weight : Easy to carry with a lifting handle so the kayak electric motor can be take....
Check Stock

BKC Brooklyn Kayak Company UH-TM315 Kayak Trolling Motor Mount - Ambidextrous Trolling Motor Mount for Quick and Easy Kayak Trolling Motor Setup

  • Easy Setup and Removal - Motor mount connects to most kayak hulls in a matter of minutes and can be removed in a matter of seconds.
  • Ambidextrous Design - Mount allows for installation of trolling motor for easy use by both left and right handed boaters.
  • Durable Materials - Rust-resistant metal and fade- and corrosion-resistant plastics will stand the test of time and exposure to the element.
  • Lightweight Construction - Hollow but sturdy tubing reduces motor mount weight, allowing for easy handling of mount and adding minimal weight to kayak.
  • Must Have for Fishing - Helps upgrade a paddle only kayak into the ultimate trolling fishing vessel without any permanent hull alterations required.
Check Stock

Old Town Sportsman 106 Powered by Minn Kota Motorized Fishing Kayak (Photic Camo)

  • Equipped with a saltwater-ready trolling motor, the Old Town Sportsman 106 Powered by Minn Kota motorized kayak offers Minn Kota’s low-profile 12-volt motor with 45 pounds of thrust. Motor battery is not included..
  • All Old Town Sportsman fishing kayaks are packed with handy convenience features, including customizable accessory tracks, cushioned floor pads for both better comfort and grip, a custom tackle box, and plenty of rod holders..
  • Three through-hull wiring kits and a universal transducer mount allow you to mount a fish finder in minutes without the need to drill into your kayak..
  • The premium dual-layer Textilene mesh seat helps you stay cool and comfortable all day long on the water.
  • adjustable foot braces offer ideal maneuverability in steering while the extra-large rudder provides excellent boat control in forward and reverse..
  • This 10-foot, 6-inch kayak has a 525-pound maximum capacity and usable capacity for people and gear of 329-pounds. The kayak weighs 121 pounds and the removable motor console weighs 17 pounds. Paddle sold separately..
Check Stock

Newport Vessels Steering Triangle for NK-180S Brushless Kayak Motor, Kayak Trolling Motors, and Other Auxiliary Motors

  • USE - steering triangle allows kayak anglers to steer their stern mounted kayak motor using rudder pedals, can also be used to steer kayaks using a variety of other mechanisms..
  • FEATURES - The design features 4 possible adjustment holes for fine tuning your steering cable placement, durable plastic construction, and 2 mounting bolts for rock solid clamping force..
  • DURABLE - It is made from durable plastic, and is ready for whatever you have to throw at it..
  • FITMENT - Compatible with NK-180S Brushless Kayak Motor & most trolling motors. Shaft Diameter: 1.15" (1 1/8 inch), Length: 7.75" (7 3/4 inch), Height: 2.5" (2 1/2 inch), Width: 3.5" (3 1/2 inch).
Check Stock

Watersnake T24 ASP - 24 Pound Thrust 12v Electric Saltwater Trolling Motor with Transom Mount

  • Watersnake asp T24 electric trolling motor is the ultimate in lightweight portability weighing only 4.85 lbs (2.2kg). It's the ideal trolling motor to use on kayaks, canoes, small dinghies, and inflatable boats..
  • Watersnake's simple, universal design keeps the weight down while delivering quality and performance on just about every kayak and canoe. Salt water motor with anti-corrosive paint and stainless steel external & internal parts allow you to take this motor into fresh, brackish and salt water without worry.
  • The adjustable transom mount fitting makes for easy attachment and has an anti-impact clip system. This easy to steer transom motor uses a hand tiller with an extendable handle, high and low-speed control, forward and reverse switch, and a two-blade mini weedless propeller..
  • So many features! Adjustable transom mount fitting. Anti-impact clip system. High and low-speed control. Forward and reverse switch. Extendable hand tiller steering..
  • Measurements: Thrust: 24 lb. Volts: 12V. Amps: 9-20. Shaft: 24" (61cm). Prop: 2 Blade, weedless design..
Check Stock