Reviews Motor gear nut

Cordless Impact Wrench,420 Ft-lb High Torque 3200 RPM,with a 21V 4.0Ah Li-Ion Battery, Fast Charger,6 Sockets, Suitable for family cars

  • 1.[Strong Power And Versatile Applications]: With a performance motor, Our Cordless Impact Wrench 420ft-lbs torque and max 3200rpm speed, allows you to tighten or loosen various nuts and bolts easily. Not only suitable for unloading tires from cars, commercial vehicles, and trailers, but also for car repairs, large construction projects or product assembly.But please note that use it within the torque range..
  • 2.【Brushless Motor】：Compared with the traditional carbon brush motor, our brushless 1/2 impact gun will give you a better working experience. the brushless motor has longer use life, Stronger motivation smaller loss of battery energy,lower machine running noise level and much safer working conditions.
  • 3.【4.0Ah Lithium Battery】：Our impact wrench 1/2 cordless equipped with 21V 2000mA 4.0Ah high-capacity lithium battery, A full charge takes about 2 hours and can be used continuously for 7-8 hours, Enough for daily work.And the battery socket is the same as the Makita battery socket and can be replaced by each other..
  • 4.【Three Speed Gears And Premium Brake-Stop】When in Forward-Mode,Our power impact wrenches has three speed gears, which you can control through the buttons on the fuselage, When in Reverse-Mode, You press the "switch ....
Check Stock

PRUSA Original Prusa i3 MK3S+ Kit, (PRI-MK3S-KIT-ORG-PEI)

  • Dual Drive technology: This Bowden utilizes an internal gearing ratio of 3:1 together with precision cnc-machined hardened steel drive gears,which will minimize slippage and increase feeding strength..
  • Fastening Spring Device: Bowden extruder allows the user to fine-tune the tightness with screw nut to fit with the most filament, such as PLA/ABS/ PETG/ TPU/NYLON/CARBON FIBER/WOOD..
  • Reduction Gear Device: It can give out more torque,reduce the burden of the motor, extend the life of the motor..
  • For Ender 3 V2, Ender 3 Pro, Ender 3 Series, Ender 5 Pro, Ender 5 Plus, CR10 Series, Anycubic Mega S, Tevo Tornado, Wanhao D9, Anet A8 E10, Prusa I3 and DIY 3D Printer..
  • We recommend E-steps: 385. Any problem when you receive the order, CONTACT US FIRST please!.
Check Stock

BioChef Gemini Twin Gear Slow Masticating Juicer - Cold Press Juicer Extractor for Fruit and Vegetables | BPA Free | Quiet and Easy to Clean White

  • TWIN GEAR JUICE EXTRACTOR - Suitable for use as a vegetable and fruit press and excels at leafy greens such as wheatgrass, celery and kale.
  • SMOOTHEST, MOST ENZYME RICH JUICE - Twin gear technology breaks open cellulose wall druing extraction allowing vitamins and enzymes to be absorbed by....
  • ULTRA EFFICIENT EXTRACTION - Twin precision gears triturating and squeezing action performs the most efficient for separating juice from fibre than....
  • MORE THAN JUST A JUICER - The Gemini doubles as a food processor. Prepare fresh baby food, dips, sorbets and nut butters. You can even grind some....
  • 20 YEAR WARRANTY ON MOTOR - Purchase with peace of mind at Vitality 4 Life. 20 years on motor, 5 years on Parts | Shop with confidence with our 30 day....
Check Stock

Bosch 2602025171 Handle with Vibration Control For Angle Grinder

  • SLIDE SWITCH - provides convenience for extended-use applications.
  • POWERFUL GRINDER DESIGN - engineered with the X-LOCK mount and 13-amp motor producing up to 9,300 rpm.
  • X-LOCK WHEEL CHANGE – features snap-on mounting and grinder lever wheel release for change-out that's up to five times faster.
  • TOOL-FREE DISC SWAP – the wheel mounts properly without the need for a spanner wrench or flange nuts for no losable parts.
  • EPOXY-COATED FIELD WINDINGS – extend motor lifetime by preventing dust and debris from penetrating the motor windings.
  • SPIRAL BEVEL GEARS – provide smooth transmission of power to grinding applications.
Check Stock

9\\\ Angle Grinder

  • Powerful 15.0 AMP motor delivers 6,600 RPM for faster material removal.
  • Rotatable rear handle rotates with just the push of a button, with positive stops every 90 degrees, to suit most cutting and grinding operations.
  • Wire mesh intake covers are engineered to prevent metal shards from entering motor especially when used in close proximity to other grinders.
  • ""Tool-less"" wheel cover allows for easy guard adjustment with no need for tools to multiple grinding and cutting angles.
  • Labyrinth construction minimizes dust and debris penetration into the motor and bearings for longer tool life.
  • AC/DC switch for use with alternative power source.
  • Lower vibration rear and side handles includes soft grip for more comfort and control.
  • Externally accessible brushes for easy serviceability.
  • Large rubber tool rest to help protect tool and surfaces from damage.
  • Rugged all metal gear housing for added protection.
  • Protective zig-zag varnish seals the armature from dust and debris for longer tool life.
  • Ideal for welders, stone finishers, masons, fabricators and more.
Check Stock

Milling on the Drill Press (DVD, 4 Hours)

  • 【Much More Powerful】The motor power of RCOG-25V milling drilling machine has a 1100W brushless spindle drive motor providing tremendous torque and variable speeds from 50-22250 RPM continuously, with overload and overheating protection fuction.The noise of this motor is very low and it is very easy to maintain.So much power will make your work much more efficient..
  • 【Parameters】Metric Scale MT3 Milling Machine adopts high precision grinding all steel spindle with excellent strength grinding gear,X axis:18.9",Y axis:6.9",Z axis:11",it has own DRO for 3 axis.Headstock swivels 360 degrees.Max drilling diameter:0.9",Max Face screening capacity:2.5",Max vertical milling capacity:0.79",Distance from spindle to table:13.8",Spindle taper:MT3,Table size:27.5"x7.1".The speed display shows inch..
  • 【Micro-Feed Precision】Benchtop Milling Drilling Machine has a micro-feed function,the accuracy is up to 0.01'', only need to tighten the middle nut of the right hand wheel to achieve the micro-feed function, loosen the nut to achieve the manual up and down movement function.Integrated cross worktable,width is widened,with high pr....
Check Stock

BOSCH 1893-6 9 Large Angle Grinder with Rat Tail Handle

  • SLIDE SWITCH - provides convenience for extended-use applications.
  • POWERFUL GRINDER DESIGN – engineered with the X-LOCK mount and a 13-amp motor producing up to 11, 500 rpm.
  • X-LOCK WHEEL CHANGE – features snap-on mounting and grinder lever wheel release for change-out that's up to five times faster.
  • TOOL-FREE DISC SWAP – the wheel mounts properly without the need for a spanner wrench or flange nuts for no losable parts.
  • EPOXY-COATED FIELD WINDINGS – extend motor lifetime by preventing dust and debris from penetrating the motor windings.
  • SPIRAL BEVEL GEARS – provide smooth transmission of power to grinding applications.
  • DIRECTED AIR FLOW – channels air through motor to cool key components.
  • VIBRATION CONTROL AUXILIARY HANDLE– allows for improved user comfort and control.
  • ADJUSTABLE TOOL-FREE GUARD – designed with multiple fixed-adjustment settings to allow the user to position the guard in a variety of working angles.
  • SERVICE MINDER BRUSHES – eliminates guesswork, stopping grinder when preventative maintenance is required.
Check Stock

DGZZI Gear Reduction Motor Holder 1Set Black 37mm DC Geared Motor Mounting L Shaped Bracket with 6mm Hexagonal Coupling and Mounting Screws

  • Wear-resistant and not easy to rust, durable and not easy to bend. Black plating makes it more stylish and chic..
  • The metal motor bracket has mounting holes for easy installation. The precise mounting holes match the M3x6mm screws perfectly, which saves you more installation time..
  • Convenient mounts are suitable for these small motors.Ideal for many hobbies and alternative applications such as model cars and robots.Ideal for 37mm pinion stepper motors..
  • Can be used for 37mm gear motors. Suitable for fixing 37GB, 37GA gearbox..
  • Packaging Includes:1PC 37mm DC gear reducer motor mount,1PC 6mm hexagon coupling,2PCS hex coupling screws,10 sets of mounting screws and nuts..
Check Stock

Motion Pro 08-0427 4.9 Gear Jammer Tool

  • Locks gears in place for easy installation and removal.
  • Allows tightening lock nuts to proper torque setting.
  • Powerful magnet holds tool in place during use.
  • Blue anodized finish with laser engraved Motion Pro logo.
Check Stock

BEMONOC Garage Door Motor 12V DC Right Angle Reversible Electric Gear Motor 45 RPM High Torque

  • Dc gear motor Dimensions: 175 * 62mm/ 6.88 * 2.44in(L * D).
  • ✔Out Shaft: 10mm shaft with 2 flats where flat to flat is 8mm and threaded end to fit a M6 tightening nut.
  • ✔Mounting: M6 screw holes, include 3 screws.
  • Main Material: Metal, Electronic component.
  • ✔Notice: the motor duty cycle is 100%, it can run continuously, it's our fault to make a wrong label, hope you can understand, any other questions....
Check Stock