Reviews Motor Tool

DEWALT Angle Grinder, 7-Inch, 8,500 RPM, 4.9-HP (DWE4597N)

  • High power 4.9 HP (maximum motor HP) 8,500 rpm motor of the angle grinder provides overload protection giving higher operating speeds under load.
  • Anti-Rotation E-CLUTCH System activates in less than a tenth of a second when a pinch/stall is detected, shutting down the motor of the metal grinder..
  • Anti-vibe side handle of DEWALT angle grinder is a Perform and Protect feature that reduces the users exposure to vibration.
  • Power-Loss Reset prevents accidental re-starts following a power disruption when the tool is left in the "on" position.
  • Power-Off advanced electronic overload protection shuts the tool off before it reaches overload or burn-up.
  • Dust Ejection System increases brush life and protects the motor from damaging particles entering the air intake that would otherwise abrade the motor.
  • Lightweight design (12.3 lbs) lessens user fatigue.
  • Low-profile gearcase allows for work in tight areas.
  • Anti-vibe trigger handle reduces user fatigue caused by vibration.
  • Automatic turn-off brushes shut down the tool when brushes need to be changed to avoid tool damage.
Check Stock

【Element Airsoft Official Store】Motor Gear Pinion Removal Install Tool RC Motor Pinion Gear Tool Motor Pinion Gear Remover Ffor AEG Motors Metal ARMY FORCE-TL002 BK EX121

  • Element airsoft 's name and element airsoft's quality. The best. Motor gear (pinion gear) tool ● Part number: EX 121. airsoft pinion gear puller.
  • With this tool, it is possible to attach and detach without burden.Mounting and dismounting are possible.The pinion remover is an essential tool for changing the pinion gear of the electric gun motor..
  • The motor pinion gear is usually press-fitted and installed, so it is almost impossible to detach it with a tool other than a dedicated tool..
  • The included small parts are grounded before and after the motor when the pinion gear is press-fitted..
  • * Please note that compatibility with D-type motors will be reduced！！！！It fits for O-type motors！！！！.
Check Stock

Hairdryer Infiniti Pro (Low Setting)

  • Infiniti Pro by Conair 1875-Watt Salon Performance AC Motor Styling Tool.
  • Say goodbye to professional stylists, but not to professional style. The Infiniti Pro by Conair 1875-Watt Salon Performance AC Motor Styling Tool puts all the power to achieve flawless results, right in your hands..
  • Ergonomically designed for ultimate comfort..
  • High Performance Technology for Smooth and Silky Results Designed with both tourmaline ceramic and ionic technology.
  • Featuring a quiet, but powerful 1875-watt AC motor, this dryer creates high airflow for quick drying and minimal heat exposure. The AC motor lasts longer than standard DC motors, and its removable filter prevents damaging lint buildup, so the motor l.
Check Stock

DEWALT 20V MAX* Drywall Cut-Out Tool Kit DCS551D2

  • 26,000 RPM motor of the drywall cutting tool delivers fast cutting in drywall, acoustical ceiling tiles, plywood, etc..
  • The drywall tool features tool-free for fast and easy bit changing without a wrench.
  • Dust-sealed switch protects against dust ingestion for longer tool life of DEWALT drywall cutout tool.
  • Bright LED light illuminates dark work surfaces for accurate cutting.
Check Stock

DEWALT Bench Grinder, 8-Inch (DW758)

  • 3/4 HP induction motor of the bench grinder provides superior power for industrial grinding applications.
  • Rugged cast iron base and motor housing of the 8-inch bench grinder provide durability and prolonged life.
  • Table grinder motor runs at 3,600 rpm for high-speed material removal.
  • Precision-machined aluminum tool rests allow the user to accurately position work.
  • Rear exhaust ports in wheel guards for smoother operation.
  • 12-1/2-inch distance between wheels for larger and longer grinding applications.
  • 3/4 hp induction motor provides superior power for industrial grinding applications.
  • Rugged cast iron base and motor housing provide durability and prolonged life.
  • Motor runs at 3,600 rpm for high speed material removal.
Check Stock

DEWALT Bench Grinder, 6-Inch (DW756)

  • Powerful 5/8 HP induction motor of the bench grinder is made for heavy-duty grinding operations.
  • Industrial cast iron base and motor housing of the 6-inch bench grinder provide durability and prolong life.
  • Table grinder motor runs at 3,450 rpm for high-speed material removal.
  • Precision-machined aluminum tool rests allow the user to accurately position work.
  • Rear exhaust ports in wheel guards for smoother operation.
  • 12-1/2-inch distance between wheels for longer and larger grinding applications.
  • Powerful 5/8 hp induction motor for heavy-duty grinding operations.
  • Industrial cast iron base and motor housing provide durability and prolong life.
  • Motor runs at 3,450 rpm for high speed material removal.
Check Stock

Makita GD0800C 1/4\ SJS™ Die Grinder, Teal

  • Powerful 6. 6 AMP motor delivers 7, 000-28, 000 RPM for faster material removal.
  • SJS technology is a mechanical clutch system that helps prevent motor and gear damage by allowing the drive shaft to slip if the wheel is forced to stop.
  • Variable speed control dial enables user to match the speed to the application.
  • Constant speed control automatically applies additional power to the motor to maintain speed under load.
  • Soft start suppresses start-up reaction for smooth start-ups and longer gear life.
  • Electronic current limiter helps protect the motor from overload.
  • Directional air-flow vents channel the tool's air output away from the user's face.
  • Labyrinth construction prevents debris from penetrating the motor, bearings and gears for longer tool life.
  • Zig-zag varnish protects the armature coil from dust and debris for longer motor life.
Check Stock

Carbon Brushes 999038 for Hitachi Power Tool Motor

  • Carbon motor brushes are one of the most components for power tool. Fit for electric hammer, electric drill, angle grinder, etc..
  • Carbon motor brushes are one of the most components for power tool like electric drill..
  • Worn brushes are often the cause of a poorly running motor.
  • Replacing brushes can fix an intermittent motor..
  • New brushes can restore a motors electric braking Used widely for various of power tools and electric motors, such as rotary hammer drill, circular saw, cut-off saw and angle grinder..
Check Stock

CRAFTSMAN V20* Oscillating Tool Cordless, Tool Only (CMCE500B)

  • Starlockplus Tool Mounting - With its StarlockPlus tool mount, you have access to over 100 FEIN accessories in the Starlock and StarlockPlus performance classes..
  • Super Quiet - The MM 350 offers minimal vibration and outstanding noise dampening which means you can work comfortably on any home improvement job..
  • Quick and Easy - Flooring tools and woodworking tools are slow to change accessories. Using FEIN's QuickIN Tool Change, switch accessories in under 3 seconds with a patented, tool-free, FEIN rapid-clamping system..
  • Superior High Torque Motor - The Fein 350W motor is overload-protected, has high-performance motor with high proportion of copper for higher cutting speed and rapid work progress..
  • Made in Germany - Fein is famous as a globally active company with German roots that stands for innovative and high-quality power tools and accessories, created for the toughest jobs in the industry to achieve ultimate performance..
Check Stock

9\\\ Angle Grinder

  • Powerful 15.0 AMP motor delivers 6,600 RPM for faster material removal.
  • Rotatable rear handle rotates with just the push of a button, with positive stops every 90 degrees, to suit most cutting and grinding operations.
  • Wire mesh intake covers are engineered to prevent metal shards from entering motor especially when used in close proximity to other grinders.
  • ""Tool-less"" wheel cover allows for easy guard adjustment with no need for tools to multiple grinding and cutting angles.
  • Labyrinth construction minimizes dust and debris penetration into the motor and bearings for longer tool life.
  • AC/DC switch for use with alternative power source.
  • Lower vibration rear and side handles includes soft grip for more comfort and control.
  • Externally accessible brushes for easy serviceability.
  • Large rubber tool rest to help protect tool and surfaces from damage.
  • Rugged all metal gear housing for added protection.
  • Protective zig-zag varnish seals the armature from dust and debris for longer tool life.
  • Ideal for welders, stone finishers, masons, fabricators and more.
Check Stock