Reviews Motor Power Supply
LEDMOMO 1203BB 6V 12V 3A 80W DC Motor Speed Controller (PWM) Adjustable Motor Driver Switch
- 1203BB DC Motor Speed Controller regulate the speed of the motor by adjusting Pulse-Width Modulation (PWM)..
- Working Voltage: DC 6-24V. Maximum continuous output current : 3A. Maximum output power: 80W..
- The Motor Speed Controller built-in switch. You can control the forward direction and the stop of DC motor by the switch..
- The circuit built-in a 3A fuse. Make the use of this motor safer..
- Note! DC motor speed controller is connected to DC power supply. Never connect directly to household 220V AC power supply..
Check Stock8PCS L298N Motor Drive Controller Board Dual H Bridge DC Robot Stepper Motor Compatible with Ardu-ino Electric Projects, Smart Car Robot
- Dual-channel H-bridge driver working mode creates higher working efficiency,L298N as main chip, Can drive one 2-phase stepper motor, one 4-phase stepper motor or two DC motors..
- The L298N driver module, using L298N chip can directly drive two 3-30V DC motor, and provides a 5V output interface, you can chip circuitry to 5V power supply, support 3.3VMCU control, you can easily control the DC motor speed and direction, you can also control the 2-phase stepper motor, smart car essential..
- Terminal driver part of the supply area VMS: +5V ~ +35V.
- Drive part of the peak current Io: 2A / Bridge.
- Logical part of the terminal power supply range Vss :4.5-5 .5V.
- Logical part of the operating current range: 0 ~ 36mA.
- The control signal input voltage range: 4.5-5.5V low 0V high.
- To avoid damage the voltage stabilizing chip, please use an external 5V logic supply when using more than 12V driving voltage.
- High working power to 46v, large current can reach 3A MAX and continue current is 2A, power to 25w..
- Use large-capacity filter capacitors and diode with freewheeling protection function, increasing reliability, large capacity filter capacitance,afterflow protection diode, more stable and reliable..
Check StockWormhole Wireless Tattoo Machine, Completely Tattoo Gun Kit with Tattoo Battery Power Supply 20PCS Tattoo Cartridge Needles 8PCS Colorful Tattoo Ink TK127
- 【Cordless Battery Power】The kit comes with a wireless tattoo power supply.Combine the functions of a wired tattoo power supply and a tattoo foot pedal into a small cordless tattoo power supply. It allows you to get rid of the wires and focus on creating tattoos. This wireless tattoo power can charge in 3 hours and work in 6 hours.Like a power bank, this little wireless tattoo power can store electricity, so you can even use it for work outdoors..
- 【Powerful Tattoo Motor】The coreless motor directly drives the tattoo machine to run, making the machine more powerful, reducing vibration, reducing skin damage, balanced coloring, more stable frequency, higher performance, and avoiding overheating of the motor when working for a long time.Help you to finish a healthy and beautiful tattoo..
- 【Widely Application】With this tattoo pen, you can not only use the cordless power supply included in the kit to make it work. You can also use an RCA cord to connect to a traditional tattoo power supply to make the tattoo pen work..
- 【30ml 8 color Tattoo Ink】The kit contains 8 different colors of 30ml tattoo ink.You needn't worry that the ink will run out soon. Feel free to create your tattoo..
- 【Gift Wrapping and Service】 Attractive packaging, great present..
Check StockNew Genuine PS for HP Z420 Workstation 600W Power Supply 632911-001 623193-001
- 24V Power Supply: Input AC 110V/220V, Output 24V, Rated power 24A 600W, PSU(SMPS) AC to DC convert , output current depends on the requirements of the power consuming equipment, Power multiple devices with different Currents/ Watts.
- Intelligent Cooling: 24V 600W Power Supply converter with aluminum alloy shell, built-in cooling fan, metal shell with multiple holes for more efficient cooling, more stable work, high efficiency.
- USED WIDELY:DC 24V Power converter Used for Brushless type motor drive, Amplifier,Radios,LED drive, CCTV Camera System, Car Stereos, water Pump and more 24V Device. NOTE:Not suitable for charging Battery,Speed Control Motors..
- Safe stable: long service life, power supply with over/under voltage, overheating protection,Compact:21.5×11.5×5cm/8.5×4.5×2 inch, weight 0.75 kg,SAFETY: Use must derating: max load cannot exceed 80%.
- Note: SMPS peak power is 25A 600W, avoid overload, For resistive equipment, Recommended for equipment under 20A 480W. For motor equipment, the starting current will be much higher than the rated power and the peak power of the SMPS needs to exceed 2 times the motor power..
Check Stock12V Fan Controller, DROK DC Motor Speed Controller for Brush Motor 7V-60V 20A 420W PWM Driver Board Control 12V 24V 36V 48V Regulator Cooling Fan Dimmer Governor Pulse Width Modulator with Adjust Knob
- Parameters --- Applicable voltage range: DC 7V-DC 60V, 60V is the highest operating voltage, please leave a margin for application. Control power: 12V within 200W.
- Aluminum Shell --- Prevents the controller from easily damaged.
- The holes in its sides and bottom makes it easier to be installed..
- Stable Performance and Small Heating --- With the good materials of FR4 double panels, reasonable circuit management and fuse, the modulator works quite excellent..
- LED Indicator and Power Supply Control --- The board equips with red LED power supply indicator which will light on when the module is power on. You can turn off power supply output by screwing the potentiometer..
- NOTE --- 1. This product is a DC brushed motor speed controller. It needs to be equipped with a DC power supply to power the governor. It cannot be connected to AC power and cannot drive the brushless motor. 2. Before powering on the wiring, please read the wiring label, the positive and negative poles of input cannot be mistaken. The output connection to the motor does not need to be positive or negative. But if the direction of rotation is wrong, please change the two wires of the motor..
Check StockKeeYees 7-70V 30A PWM DC Motor Speed Controller Switch Control 12V 24V 36V 48V with 30 Amp Fuse
- 【Wide Voltage】: Wide voltage input 7-70V, maximum output current 30A (Please refer to the recommended power range for actual use current. It is recommended that 12V within 250W, 24V within 350W, 48V within 450W, and 60V within 500W. ).
- 【Speed Control Knob】: The knob has a switch function, which can control the motor speed from 0% to 100%. Adjustable potentiometer flexible cable can be separated, the cable length is 15CM..
- 【30A Fuse】: This set contains a 30A fuse to prevent shorting of the motor interface. Double protection of your Motor and Motor Speed Controller..
- 【Note 1】: The power of the input power supply must be greater than 1.5 times the rated power of the motor to make the motor work (note: the input voltage and the rated voltage of the motor must be consistent)..
- 【Note 2】: If there is a forward-reverse circuit regulator on the children's car, please be sure to connect the speed controller between the power supply and the forward -reverse circuit regulator of the children's car. Otherwise, the speed controller may be damaged..
Check StockSaihisday 12V Car Auxiliary Heater, 4 Ports Universal Underdash Compact Auxiliary Heater, Winter Automotive Air Conditioner for Heating&Defrosting
- Function: Designed with powerful blower motor and 4 vent holes, this car air conditioner is used as windscreen defroster, demister and heater in winter..
- Type: 4 Ports Universal Underdash Compact Auxiliary Heater.
- Fitting Required: 5/8"(16mm) inner diameter water hose..
- Switch Instruction 1: The red wire of the speed control switch is connected with positive pole of power supply and motor..
- Switch Instruction 2: The blue wire of the switch is connected with negative pole of motor..
- Switch Instruction 3: The black wire of the speed control is connected with negative pole of power supply..
Check StockHiLetgo BTS7960 43A High Power Motor Driver Module/Smart Car Driver Module for Arduino Current Limit
- 5V isolate with MCU, and effectively protect MCU.
- Voltage indication of motor driver output end.
- Just need four lines from MCU to driver module (GND. 5V. PWM1. PWM2).
- isolation chip 5 V power supply (can share with MCU 5 V)..
- Able to reverse the motor forward, two PWM input frequency up to 25kHZ.
- two heat flow passing through an error signal output..
- Isolated chip 5V power supply (can be shared with the MCU 5V), can also use the on-board 5V supply.
Check Stock7-80V 30A PWM DC Motor Speed Controller Switch Control 12V 24V 36V 48V with 30 Amp Fuse
- ①【Wide Voltage】: Wide voltage input 7-80V, maximum output current 30A (Please refer to the recommended power range for actual use current. It is recommended that 12V within 250W, 24V within 350W, 48V within 450W, and 60V within 500W. ).
- ②【Speed Control Knob】: The knob has a switch function, which can control the motor speed from 0% to 100%. Adjustable potentiometer flexible cable can be separated, the cable length is 15CM..
- ③【30A Fuse】:The set is equipped with a 30A insurance. Protection of your Motor and Motor Speed Controller. And is equipped with a spare insurance, which can be quickly replaced and repaired..
- ④【Note 1】: The power of the input power supply must be greater than 1.5 times the rated power of the motor to make the motor work (note: the input voltage and the rated voltage of the motor must be consistent)..
- ⑤【Note 2】: If there is a forward-reverse circuit regulator on the children's car, please be sure to connect the speed controller between the power supply and the forward -reverse circuit regulator of the children's car. Otherwise, the speed controller may be damaged..
Check StockMEISHILE DC 12V 50A 600W Switch Power Supply 110V AC to DC 12 Volt 50 Amp SMPS Converter Power Supply Adapter Transformer
- ...camera, household appliances, electronic devices, brushless motor, automation equipment, computer project, etc.
- ☆ Universal input voltage: AC 110V / 220V (85-145V/185-265V).
- Output current depends on the current drawn by your device. The total output current/power can not exceed 80% of the rated power of the power supply.
- ☆ Portable, Small and Compact: 21.5×11.5×5cm/8.5×4.5×2 inch, Net weight 0.8 kg. SATISFACTION GUARANTEE: For any question, do not hesitate to contact us, we offer you a satisfaction guaranteed.
- ☆ High EFC, Low-loss, Long Service Life: More than 6,000 hours of service life.
- Low standby power consumption, High efficiency. EFC much higher than linear supply. Safe and Stable: Power Supply has over / under voltage, over heat protection, continuous fan heat dissipation. Strictly tested before leaving the factory..
- ☆ Choose: The Rated Power is the Peak Power, does not mean that it applies to devices at this power (watt). For resistive device, SMPS peak power ≥ device power × 1.25 times. For Motor device, the peak power of the SMPS needs to be more than 2 times the power of the Motor. Same goes for Rated Current..
Check Stock