Reviews Mosfet Tube

Lancer Tactical Enforcer NEEDLETAIL Skeleton Airsoft AEG Rifle Low 350 FPS Black RED

  • Lancer Electric Trigger Unit (ETU) with fire cutoff system (built-in MOSFET) to fully optimize performance, snappy trigger response, cyclic rate,....
  • Quick change spring design, accessible through buffer tube. Flat trigger and enlarged trigger guard design. Lightweight durable aluminum free float....
  • Copper polished 6.03 mm tight bore barrel improves range and accuracy (200+ feet with 0.20g BB's). Comes with 120rd midcap metal training magazines.....
  • Operable dust cover reveals a rotary style hop-up. Full length 20mm top rail for scopes, sights and magnifiers..
  • Low resistance wiring prevents potential damage from the battery. Fires in full-auto and semi-auto, with a functional safety..
Check Stock

Aoicrie MKS Gen L V1.0 3D Printer Integrated Mainboard Controller PCB Board Compatible Ramps1.4/Mega2560 R3 with A4988 Motor Driver for 3D

  • Integrate 2560 and Ramps1.4 one PCB,which designed to avoid complicated connections, easier wiring and more stable Use high-quality 4 layer PCB&Use special power chip,support 12V-24V, also Use Run Marlin firmware,same as configuration way as Ramps1.4, it can replace Ramps1.4 directly..
  • Use high quality MOSFET tube,better cooling and more stable.Use special power chip,support 12-24V input,reduce the heated bed current to 1/4 that slove the Mosfet heat problem efficiently and power shortage..
  • Support a variety of stepper drivers: A4988,DRV8825,TMC2208 and TMC2100, and available to work with LCD2004,LCD12864,MKS TFT24/28/32/35 & Available to connect external large stepp drivers, A4988 driver board widely used in 3D printers and small CNC machines..
  • Support functions: Non-trace resumption after power off, run out filament ,and auto shut down, XTZ axis with different color terminal controls the motors and end stop,which is convenient to wire.Use high-quality 4 layer PCB&Use special power chip.Retail Servos,AUX-1 and AUX-2 interface of Ramps1.4 provide three 5V output and three 12V output interfaces..
  • Five different step resolutions: full-step, half-step, quarter-step, eighth-step, and sixteenth-step.Adjustable current control lets you set the maximum current ....
Check Stock

Rockville RVB10.1A 10 Inch 500W Active Powered Car Subwoofer+Sub Enclosure Box

  • Package Includes: (1) Rockville RW68CA 400w 6x8 Slim Under-Seat Active Powered Car/Truck Subwoofer Sub, (1) Rockville RWK10 10 Gauge Amp Installation....
  • Features of RW68CA: Rockville RW68CA 6x8" 400w Slim Under-Seat Powered Car Subwoofer, Enclosure is made out of cast aluminum which stays cool at all....
  • Thermal Protection Circuit, Short Protection Circuit, Overload Protection, Heavy Duty Mounting Feet, PWM MOSFET Power Supply, Low Level RCA Input,....
  • Features of RWK10: Rockville RWK10 10 Gauge 2 Channel Car Amplifier Wiring Installation Kit, (1) 17 High Grade Twisted Pair of 100% Copper RCA Cable,....
  • 40 Amp ATU Inline Fuse, 7 Split Tube Loom, Accessories Included: Wire Ties, Ring Terminals, Butt Connectors, Spades, and Grommets, Soft abrasion proof....
Check Stock

Rockville USS10 10 800w Slim Under-Seat Powered Car/Truck Subwoofer Sub+Amp Kit

  • Package Includes: (1) Rockville USS10 10" 800w Slim Under-Seat Active Car/Truck Subwoofer Sub, (1) Rockville 10 Gauge Amp Wire Kit ANL Fuse Holder....
  • Features of USS10: Rockville USS10 800 Watt 10” Slim Car Subwoofer, 800 Watts Peak / 200 Watts RMS, PWM MOSFET Power Supply, Low Level RCA Input,....
  • Fuse Rating : Single 25A. Details of USS10: Maximum Power RMS : 200 Watts, Impedance : 2 Ohm, Dimensions : 15 x 10.89 x 2.9 (L x W X H) Inches,....
  • Features of RWK10: Rockville RWK10 10 Gauge 2 Channel Car Amplifier Wiring Installation Kit, (1) 17 High Grade Twisted Pair of 100% Copper RCA Cable,....
  • Gold Plated AGU Heat Resistant Fuse Holder, 40 Amp ATU Inline Fuse, 7 Split Tube Loom, Accessories Included: Wire Ties, Ring Terminals, Butt....
Check Stock

LCR-T4 Mega328 Digital Transistor Tester Resistance Capacitance Diode Triode Capacitance Resistance ESR Meter MOS PNP NPN LCR with Case

  • Test ranges:Inductors, capacitors , diodes, dual diode , mos, transistor, SCR , the regulator, LED tube, ESR, Resistance, Adjustable potentiometer.
  • Can detect the transistor, MOSFET protection diode amplification coefficient and the base to determine the emitter transistor forward biased voltage..
  • High test speed, valid component test: 2 seconds (except in the larger capacitor of large capacitance measurement also takes a long time, the measured time of one minute is normal).
  • 128*64 big Backlight LCD display,only 2mA when stand by..
  • Auto power off function to avoid unnecessary waste, saving battery power, improved battery life.
Check Stock

YJYGR 3D Printer Motherboard MKS Gen V1.3 Ramps1.4 & 2560 Compatible MKS GEN V1.4 Motherboard Driver Board

  • 1. Integrating 2560 and ramps1.4 on one board, which solves the problem that the Ramps1.4 combination interface is complicated and prone to failure..
  • 4. The use of high-quality MOSFET tube has better heat dissipation effect..
  • 2. Replaceable motor driver, support 4988 driver, 8825 driver, TMC2100 driver.
  • 3. The circuit board uses a high-quality 4-layer board, and has been specially optimized for heat dissipation.
  • We are a professional Amazon store. If you have any questions, you can contact us at any time. We sincerely create a good buying experience for every customer who comes to each store..
Check Stock

ICQUANZX Mega328 Mosfet Transistor Capacitor Tester(not Included DC9V Battery)

  • WIDE APPLICATION: This multifunctional capacitance meter can be used to test triode, field-effect tube(FET), diode, resistor, capacitor, inductor, MOS, SCR, which is available for various electric transistor testing..
  • LARGE & CLEAR LCD DIGITAL DISPLAY: This amazing detector adopts 1.8" TFT color LCD screen with high-resolution. Besides, different parameter is shown with different color, convenient and simple for you to check the parameter..
  • AUTOMATICAL IDENTIFICATION: intelligent transistor checker is able to detect NPN and PNP transistors, N-channel and P-channel MOSFET, diodes, thyristors, resistors, capacitors or other devices automatically..
  • BATTERY POWERED: This monitor is powered by DC9V battery (not included)..
  • AUTO SHUT-DOWN FUNCTION: Our advanced electronic transistor tester owns auto shut-down function. There is shutdown countdown displayed on the monitor and the shutdown countdown time can be extended to 40s..
Check Stock

VGEBY ESC XT60 Electronic Brushless Speed Controller 30A for RC Drone RC Airplane Helicopter(3.5mm Bullet Plugs)

  • * Smooth Control-- The singlechip microcomputer adopts an independent voltage regulator chip, which avoids the power interference caused by the BEC load change and improves the working stability..
  • * High Efficiency-- The output MOSFET power tube is equipped with an independent heat sink to reduce the temperature rise of the device and improve the high current working capability of the system..
  • * Good Antiinterference-- The power input terminal adopts ultralow impedance and largecapacity electrolytic capacitor, which improves the antiinterference ability..
  • * 30A Current Operation-- Made of high quality electronic components, dependable to use. Features 30A continuous current and 40A peak current..
  • * Applicable for-- Practical accessory for RC remote control drone, helicopter and FPV, etc. Easy to install, no complicated operations required..
Check Stock

Van Heusen mens Fitted Poplin Solid Dress Shirt Cameo Blue 17.5 Neck 36 -37 Sleeve X-Large US

  • Lancer Electric Trigger Unit (ETU) and MOSFET with fire cutoff system to fully optimize performance, snappy trigger response, cyclic rate, accuracy.....
  • Quick change spring design, accessible through buffer tube. Flat trigger and enlarged trigger guard design. Light weight durable aluminum free float....
  • Copper polished 6.03 mm tight bore barrel improves range and accuracy (200+ feet with 0.20g BBs). Comes with 120rd midcap metal training magazine and....
  • Operable dust cover reveals a rotary style hop-up. Full length 20mm top rail for scopes, sights and magnifiers. Low resistance wiring prevents....
  • (Battery and Charger not included) Fires in full-auto and semi-auto, with a functional safety. Includes a metal 120 round mid-cap and 1000round bag of....
Check Stock

Airgunplace Well HOP UP Unit in Airsoft Sniper (VSR10 MB02 MB03 MB07)

  • ◙ NOT a part or component. NOT for real weapons. Optics (Scopes/Red Dots in images) NOT included unless stated clearly. Battery and Charger may not be included. Please check the bulletpoints AND description carefully (Click on Show More if available). Blaze orange tips are preinstalled. Assembly may be required. ◙.
  • Matrix Gen 3 Lipo ready gearbox with micro-switch trigger and quick change Guide.
  • Integrated MOSFET for improved power usage, motor performance, and trigger response.
  • High strength nylon fiber reinforced polymer receiver, stock, buffer tube, grip, and carrying handle.
  • Flat top receiver allows mounting of optics or other accessories.
  • Fixed stubby stock w/ easy to access large battery compartment.
  • Aluminum quad rail for attaching tactical accessories and gear.
  • Flip up rear sight with standard A2 style fixed front sight.
Check Stock