Reviews Molybdenum Mandrel

Utoolmart Metal Ring Sizer Mandrel Bracelet Stick Gauge Measuring Jewelry Tool Hammer Set Jewelry Tool

  • 【Jewelry Rubber Mallet】- Jewelry mallet will provide perfect strike without scratching or damaging the surface of materials. Rubber head would not leave traces on the jewelry or damage your jewelry. The head diameter: 25mm. Fine workmanship and high quality..
  • 【Wood Ring Mandrel】- Wood ring mandrel is perfect for ring making and shaping, fix bent rings.great for holding rings for polishing and sanding..
  • 【Metal Ring Mandrel】- Utoolmart metal ring mandrel is made of steel, US size 0-15, come in half sizes.The ring sizes are clearly marked, easy to use and accurate to the size. Great for professional and beginners..
  • 【Perfect Performance】- This is a nice basic ring adjuster repair kit. Great for someone get into jewelry-making as hobby and on-line shopper for ring size determining. Good for fix bent rings, making the bent ring round again..
  • 【Ring Making and Shaping Tool Kit】- Package Include: Wood Ring Mandrel + Jeweler Rubber Hammer + Metal Ring Mandrel +Metal Ring Mandrel..
Check Stock

POP Rivet 18-8 Stainless Steel - 8-8 1/4 x 1/2 Gap 0.376-0.500 Qty-25

  • Dome head rivets are mainly used in applications where there is no access to the rear (blind side) of the joint. Domed head rivets are the most common type of rivets..
  • one is called the rivet hat and mandrel. Both the hat and mandrel are pre-assembled and ready to use..
  • Dome head rivets are installed by using a riveting tool to draw the mandrel which causes the body to deform and clamp down on the joint..
  • Upon reaching the designed clamping force, the mandrel snaps and is discarded. The mandrel side of the rivet, once the mandrel is removed, will leave the domed head exposed..
  • Rivet size and grip range is measured in installed length..
Check Stock

POP Rivet 18-8 Stainless Steel - 8-12 1/4 x 3/4 Gap 0.626-0.750 Qty-25

  • Dome head rivets are mainly used in applications where there is no access to the rear (blind side) of the joint. Domed head rivets are the most common type of rivets..
  • one is called the rivet hat and mandrel. Both the hat and mandrel are pre-assembled and ready to use..
  • Dome head rivets are installed by using a riveting tool to draw the mandrel which causes the body to deform and clamp down on the joint..
  • Upon reaching the designed clamping force, the mandrel snaps and is discarded. The mandrel side of the rivet, once the mandrel is removed, will leave the domed head exposed..
  • Rivet size and grip range is measured in installed length..
Check Stock

POP Rivet 18-8 Stainless Steel - 3-2 3/32 x 1/8 Gap 0.032-0.125 Qty-250

  • Dome head rivets are mainly used in applications where there is no access to the rear (blind side) of the joint. Domed head rivets are the most common type of rivets..
  • one is called the rivet hat and mandrel. Both the hat and mandrel are pre-assembled and ready to use..
  • Dome head rivets are installed by using a riveting tool to draw the mandrel which causes the body to deform and clamp down on the joint..
  • Upon reaching the designed clamping force, the mandrel snaps and is discarded. The mandrel side of the rivet, once the mandrel is removed, will leave the domed head exposed..
  • Rivet size and grip range is measured in installed length..
Check Stock

POP Rivet 18-8 Stainless Steel - 8-6 1/4 x 3/8 Gap 0.251-0.375 Qty-25

  • Dome head rivets are mainly used in applications where there is no access to the rear (blind side) of the joint. Domed head rivets are the most common type of rivets..
  • one is called the rivet hat and mandrel. Both the hat and mandrel are pre-assembled and ready to use..
  • Dome head rivets are installed by using a riveting tool to draw the mandrel which causes the body to deform and clamp down on the joint..
  • Upon reaching the designed clamping force, the mandrel snaps and is discarded. The mandrel side of the rivet, once the mandrel is removed, will leave the domed head exposed..
  • Rivet size and grip range is measured in installed length..
Check Stock

26PCS Cut-off Wheel Screw Mandrel Set, 2mm/3mm/6mm Screw Mandrel for Rotary Tools (1/8 Shank, 1/4 Shank)

  • 10 PCS 2mm (Approx 5/64)Screw Mandrel 3mm( Approx 1/8) Shank.
  • 10 PCS 3mm (Approx 1/8) Screw Mandrel 3mm ( Approx 1/8) Shank..
  • 3 PCS 6mm (Approx 1/4) Screw Mandrel 3mm (Approx 1/8) Shank.
  • 3 PCS 6mm (Approx 1/4) Screw Mandrel 6mm (Approx 1/4) Shank..
  • The base mandrel is suitable for discs such as diamond cutting wheels, resin cutting wheels and small saw blades..
Check Stock

4-Piece Bench Anvil Combination V-Slot Bench Pin Ring Round Bracelet Mandrel Vise Jewelry Making Metal Forming Kit

  • This 4-piece convenient bench tool kit includes a ring mandrel, Round bracelet mandrel, a wooden V-slot bench pin, along with a bench mounting system....
  • The wooden bench pin and bracelet mandrel will fit perfectly into the opening underneath the anvil (one at a time) - held when the entire device is....
  • The hardened steel ring mandrel is marked with U.S. sizes 1 through 15.
  • The hardwood bench pin measures is cut with a v-slot.
  • The Round bracelet mandrel is constructed from hardened steel and designed with a tang.
Check Stock

Gyros Stainless Steel Mandrel, 1/8" Shank, Fits 1/4" Arbor Hole Size Strong and Vibration-Free. Used to Mount Accessories like Miniature Circular Saw Blades, Cut-Off Wheels, etc. onto Rotary Hand Tools.80-18105

  • High-Quality Stainless Steel --- this Gyros Professional Mandrel is made of high-quality stainless steel which is resistant to corrosion and staining, which increases mechanical strength Making it practically strong and durable..
  • Essential and Sturdy Accessory --- Compatible with most rotary tools, this mandrel provides a supportive and sturdy mounting base for sanding, buffing, or cut-off wheels and discs, saw blades, cutting blades, and mini rubber grinding wheels..
  • 1 Mandrel and 2 Washers Included --- Package Includes 4 Pieces - 1 mandrel shank 1 screw head and 2 washers. Fits a ¼” center hole, with a ⅛” straight shank that is compatible with most power rotary tools like the Gyros PowerPro Rotary Tools..
  • Wide range of Uses --- This is the ideal wheel mandrel for use with rotary tool attachments and accessories, Gyros is the preferred brand by many polishers, metal workers, jewelers, hobbyists, craftsmen, and professionals..
  • Proudly made in the USA, for your safety, Make sure that Mandrel is seated correctly with the rotary tool and tightened before use, and always use Gyros Mandrel with proper protective clothing, safety glasses, or face shield..
Check Stock

Pen Mandrel Woodworking Pen Turning Mandrel Parts Woodworking Steel Pen Mandrel Saver Mechanical Accessory Tool Taper Shank #2 Morse Taper

  • Appropriate for many lathes: each wood turning pen mandrel is 7.95 inches in total length, 6 mm/ 0.24 inch in diameter, which is acceptable for most....
  • An adjustable tool: the package includes 1 useful woodworking pen mandrel saver with fine polished, the length of the shaft can be adjusted at will....
  • Firmly use: the mandrel for lathe is made of quality steel material, tough and sturdy, wear resistant and high temperature resistant, which can help....
  • Flexible to use: pen turning accessory is equipped with a bushing that can protect the mandrel from scratches, which can be moved easily and flexibly,....
  • Versatile uses: the lathe mandrel is designed for producing pens, with fine workmanship, which can reduce the off center turning, improving your work....
Check Stock

West Coast Paracord Easy Assistant Mandrel – Complicated Knots Made Simple – Ingenious Design – No Instruction Book Needed (1 Inch)

  • This mandrel is formulated with an ingenious design that will allow you to make complicated knots and turks in numerous styles and sizes. Customize any project without the complicated and lengthy tying..
  • Mandrel comes with pins and a rubber band to help keep cord in place. Mandrels are available in 4 different sizes (3/4 Inch, 1 inch, 1 ½ Inch, and 2 Inches)..
  • There is no instruction guide needed. Instructions are engraved in the mandrel to make for easy use..
  • Mandrel can be used to tie a Turks Head Knot and is great for hammer handles, axe handles, fishing rods, walking sticks, flashlights, golf clubs, umbrella handles, shovel handles and more!.
  • Take knot tying to the next level without the hassle. Forget the chaos of pins falling out, trying to follow patterns, and reading confusing construction, and upgrade to this West Coast Paracord Easy Assistant Mandrel!.
Check Stock