Reviews Molybdenum Disulfide Oil

Lubrimatic 11335 1 Pack Moly EP Grease, 14 oz. Cartridge

  • Contains extreme pressure (EP) additives to reduce scuffing, scoring and seizure with high loads.
  • Addition of molybdenum Disulfide to Lithium based grease makes this Lubricant especially effective for sliding motions, such as sleeve-journal rotating shafts and Automotive ball joints.
  • 0 to 280 degrees Fahrenheit operating range.
  • Drop point 360 degrees F not for disc Brake wheel bearing applications.
  • NOT for disc Brake wheel bearing applications.
Check Stock

Chain Life Foaming Lubricant - 17 oz - Protect All 35017PA

  • [VERSATILITY]: Protect All Chain Life Foaming Lubricant is ideal for motorcycles, boats, jet skis, ATVs, snowmobiles, bicycles, and more.
  • [PERFORMANCE]: Coats the surface with a thin, thermally-stable film of extreme pressure lubricant, providing protection and lubrication.
  • [CONVENIENCE]: Formulated as a foaming lubricant, Chain Life applies as a bead of foam, eliminating overspray or wasteful dripping and providing a barrier between moving metal parts.
  • [COMPOSITION]: Chain Life has no moly (Molybdenum disulfide), Silicone or Graphite, ensuring a smaller wear scar on the surfaces.
  • [EFFICIENCY]: Designed for industrial use, Chain Life starts where oil-based lubricants leaves off, repelling dirt, sand, mud, and grass and preventing metal to metal contact under heat and pressure.
Check Stock

SCITOO Rear Axle Bearing Carrier replacement 52200-HM3-000 for Honda FourTrax 250 Sportrax TRX300X 1987-2009

  • FITMENT - 1987-1988 1991-1992 for Honda FourTrax 250 1993-2008 for Honda Sportrax 300 2009 for Honda TRX300X.
  • High Quality - The drive shaft is assembled with a special grease containing molybdenum disulfide to provide reliable performance even under....
  • Advantages - 100% neoprene boots tightly the shell to prevent sand and stone from entering, leaving no gaps, and ensuring no oil leakage.
  • SERVICE - Completely assembled and easy to install. If you have any questions, please contact us first.
Check Stock

Swepco 101 Moly Grease NLGI#2

Check Stock

SWEPCO 101 Moly Grease

  • Excellent water resistance and stability even where continuously exposed to weather.
  • Consistency retained over long periods in severe vibration conditions.
  • Ideal for power take-off linkages, chassis points, trailer hitches and axle splines.
  • Designed for lubrication of demanding applications with high shock loads.
Check Stock

Shell Rotella (SD) Special Duty Grease (550049926)

  • Non-melt grease that will not melt at any temperature.
  • Contains the technical fine grade Molybdenum Disulfide (Moly Powder).
  • Optimum performance range is -30°F to 500°F (-34°C to 260°C).
  • Withstands up to 500,000 pounds per square inch of pressure.
  • Contains SWEPCO's proprietary anti-friction and anti-wear additive, LUBIUM.
Check Stock

CV-2 Synthetic Grease Cartridge Case/6-14oz

  • Non-melt grease that will not melt at any temperature.
  • Contains the technical fine grade Molybdenum Disulfide (Moly Powder).
  • Optimum performance range is -30°F to 500°F (-34°C to 260°C).
  • Withstands up to 500,000 pounds per square inch of pressure.
  • Contains SWEPCO's proprietary anti-friction and anti-wear additive, LUBIUM.
Check Stock

Air Venturi Moly Metal-to-Metal Paste, 1 oz.

  • Excellent for lubricating spring-piston chambers.
  • Molybdenum disulfide molecule bonds with the metal.
  • Prevents wear and galling on all metal-to-metal surfaces.
Check Stock

Bike-Aid Dri-Slide 4oz. Lube with Needle Nozzle

Check Stock

Ultra Lube 10314 Moly EP Biobased Grease- 14 oz. Cartridge

  • Non-melt grease that will not melt at any temperature.
  • Contains the technical fine grade Molybdenum Disulfide (Moly Powder).
  • Optimum performance range is -30°F to 500°F (-34°C to 260°C).
  • Withstands up to 500,000 pounds per square inch of pressure.
  • Contains SWEPCO's proprietary anti-friction and anti-wear additive, LUBIUM.
Check Stock