Reviews Mks Gen V3

FYSETC 3D Printer Parts Stepstick Mute TMC2209 V3.1 Stepper Motor Driver UART Mode with Heatsink for Reprap Ram1.4 MKS Gen/SKR V1.3 MKS GEN L Ramps 1.4/1.5/1.6 Control Motherboard-5Pcs

  • TMC2209 V3.1: ultra-silent motor driver, 2020 New Version, compatible to a number of legacy drivers as well as to the TMC2208, Support UART mode, compatible with popular motherboards such as FYSETC S6/F6, MKS SGENL, MKS GENL v2.0, MKS Robin E3D, SKRv1.3/1.4. Heat sink color is random: Blue or Black..
  • Upgrade Tips: add CLK pin, not connect in default, tie to GND via 0R.
  • SPREAD pin is floating. Reserve pull-up and pull-down resistors. Move TX from 3 to 5..
  • Advantage 1: StallGuard for sensorless homing. The integrated power MOSFETs handle motor currents up to 2A RMS with protection and diagnostic features for robust and reliable operation. A simple to use UART interface opens up tuning and control options. Store application tuning to OTP memory..
  • Advantage 2: Industries’ most advanced STEP/DIR stepper motor driver family upgrades designs to noiseless and most precise operation for cost-effective and highly competitive solutions..
  • Advantage 3: Step/Dir Drivers for Two-Phase Bipolar Stepper Motors up to 2.8A peak –StealthChop for Quiet Movement – UART Interface Option –Sensorless Stall Detection StallGuard4..
Check Stock

MKS SERVO42C NEMA17 Closed Loop Stepper Motor Driver Low Noise for CNC 3D Printer Prevent Losing Steps Compatible with Gen L SGen L SKR 2 / V1.4 Turbo BTT Octopus V1.1 Mainboard

  • MKS servo42C is a product developed by MKS to meet market demand. The closed-loop motor uses the motor's rotation angle feedback to the drive circuit to detect whether every step that should be taken has been taken to prevent losing steps. If a closed loop occurs, the motor will make up or lose steps through the feedback information, and the blue LED on the closed loop module will light up..
  • Support 1-256 subdivision,odd subdivision (such as 11 subdivision) is also available. And support motors with 0.9 degree or 1.8 degree. Maximum speed 1000RPM. With usart interface, you can connect the computer by serial port, for parameter adjustment and query..
  • Position /speed/torque closed-loop, it can run at high speed without losing step. Easy to install and wire. The max printing speed can reach 150-180mm/S. Field-Oriented control, low noise, low vibration and low calorific. 4 Half bridge driver with 8 MOSFET, high operating efficiency. 14Bits magnetic encoder, high angle resolution..
  • Compatible with Gen L SGen L, SKR 2 / V1.4 Turbo BTT Octopus V1.1 Motherboard and other board which is seperated with drivers, that means drivers is not soldered onto the board.
  • Package: 1*MKS SERVO42C(include motor) + 1*Adapter board(MKS APT) + 1*60cm 6pin Data Cable . (User metho....
Check Stock

ALMOCN 3D Printer Reprap Smart Controller LCD 12864 Graphic Smart Display Controller Board with Adapter and Cable for RAMPS 1.4 Reprap 3D Printer Kit

  • 4.3 inch,800*480 IPS,Capacitive Touch Screen,Phone Cord or Flat Ribbon Cable connect to the motherboard.
  • Opensource,you can customize your own UI and functions,the source code:https://github.com/makerbase-mks/MKS-H43-firmware.
  • Only work with motherboard which have card slot(such as MKS SGen_L,MKS Robin series,SKR series,etc.),connect....
  • Motherboard must use marlin2.x firmware and config like this:https://github.com/makerbase-mks/MKS-H43#marlin-config.
  • Instruction manual:https://github.com/makerbase-mks/MKS-H43.
Check Stock

6F50/6F55 Transmission Valve Body Solenoid Module Replacement Da8P7G391Aa,Da8P7G391Ab Fit For Explorer 2007 2018 6F50 Transmission 6F50 Solenoid

  • Compatibility?¡§ooSpecially designed for Ford Edge/Explorer/Flex/Fusion/Taurus, and fit for Lincoln Continental/MKS/MKT/MKX/MKZ..
  • Powerful function?¡§ooThe solenoid module restores the ability to shift the vehicle in and out of gear without hesitation or rough.
Check Stock

Cooler Master MasterLiquid ML240 Illusion Close-Loop AIO CPU Liquid Cooler, Translucent Dome, 3rd Gen Dual Chamber Pump, 240 Radiator, Dual MF120 Halo for AMD Ryzen/Intel LGA1700*/1200/115X

  • Translucent Dome: Stunning lighting visuals with translucent water chamber dome compatible with software customization..
  • MasterFan MF120 Halo: Dual loop Gen 2 Addressable RGB fans with 24 individual ARGB LEDs..
  • 3rd Gen Dual Chamber Pump: Next level cooling with our redesigned housing and impeller to eliminate heat better than ever while keeping the sound at a chilling silence..
  • Industrial Grade Seal: High Industrial Grade EPDM materials reinforces the seal for improved longevity and anti-leak prevention..
  • Intel LGA1700*/1200/1151/1150/1155/1156/1366/2066/2011-v3/2011 *Intel’s Alder Lake LGA1700 Kit, Available on Amazon Part#:603005870-GP ASIN:B09V3CFDP3.
Check Stock

for ROLAND MKS-80 Original Factory & NEW Created Sound Library & Editors on CD or download

  • New Life for your beloved old-school Synth`s.
  • ROLAND MKS-80 Large Original Factory & New Created Sound Library & Editors on CD or download. Sound Library over 1,300 the Legendary MKS-80 original factory and new created voices (Banks/Patches/Single Voices).
  • THE Legendary ROLAND MKS-80 Sounds: Dance, Rock, Alternative, Pop, Orchestra, Band, Pianos, Rhodes-Piano, Electric and Acoustic Instruments, Solo, Strings, Pads, Bass, Drums KIT and Percussion, FX....
  • All set`s include huge sound library and editors. You can load/save/edit single voices/patches/banks/effects in computer and transfer to your synth. Very easy to installing and work. You need computer, synth, midi cable (in/out) and midi interface to connect your synth to the computer sound card..
  • NOTE! This is NOT actual synthesizer! Sound Library and Editors ONLY! We offer a big selection original factory and created sounds/single voices/patches in SYSEX Format for download in real synthesizer..
Check Stock

Eve Door & Window (Matter) – Smart Contact Sensor for Doors & Windows, Open/Closed State, Automatic Control of Accessories, Matter Over Thread, Apple Home, Alexa, Google Home, SmartThings

  • Check your door or window: See the current open/closed state at a glance. Create automations to control other connected devices in your home whenever doors or windows are opened or closed (available on selected platforms)..
  • Receive activity notifications (available on selected platforms).
  • Review time and duration statistics to make smarter choices in the Eve app for iOS.
  • Matter-enabled to let you seamlessly monitor your home across smartphones and voice assistants of all major platforms. Cutting-edge Thread network technology for a robust smart home..
  • 100% Privacy: No Eve cloud, no registration, no tracking. Local communication without cloud dependency..
  • Requires iOS/iPadOS 16.4 (or later) or Android 8.1 (or later) plus a hub of your chosen platform (Apple: Apple TV 4K (2nd gen), Apple TV 4K (3rd gen, 128 GB), HomePod (2nd gen), HomePod mini / Samsung: SmartThings Hub v3 / Amazon: Echo (4th gen) / Google: Nest Hub (2nd gen), Nest Hub Max, Nest Wifi Pro).
Check Stock

Replacement Voice Remote Control L5B83H with Voice Function Fit for Fire TV Cube,Fire TV Stick 4K,Fire TV 3rd Gen,Fire TV Stick Lite

  • 【Voice Function】This remote enable voice search which let's you tell the tv everything What you want and it happens,at the push of a microphone button!Comfortable hand-held design,easy to operate, ergonomically perfect in your hand..
  • 【How To Pair】Restart your fire tv,press and hold the Home button at least 10 seconds after the Home screen appears,until the LED indicator starts to rapidly flash amber.Then the remote will automatically match the fire tv.And the pairing interval needs to wait at least 30 seconds..
  • 【Compatible With】For Fire TV Stick 4K, 2nd Gen and 3rd Gen TV Stick, TV Stick Lite, Stick 2020 Release, 1st Fire TV Cube, 2nd Gen Fire TV Cube, 3rd Gen Fire TV (Pendant Design), E9L29Y, LY73PR, S3L46N, EX69VW, A78V3N, LDC9WZ..
  • 【Not Compatible With】Fire tv remote doesn't work with Fire TV Stick (1st Gen),Amazon Fire TV Edition smart TVs,and Fire TV (1st and 2nd Gen).
  • 【Products Include】 1* Product manual.
  • 1* New second-generation voice remote control (not including 2 AAA batteries).
Check Stock

Stayhome Mega2560 RAMPS1.4 RepRap Mendel I3 Similar to MKS Base V1.5 with Cabl 3D Components Integrated Motherboard V1.0 Compatible

  • Mega2560 RAMPS1.4 RepRap Mendel I3 Similar to MKS BASE V1.5 with Cabl 3D Components Integrated Motherboard V1.0 Compatible.
Check Stock

BIGTREETECH Filament Runout Sensor Smart Filament Detector 1.75 mm Filament Break Detection Module in 3D Printer Accessories for SKR Mini E3 Octopus V1.1 3D Printer Control Board

  • ❤【Auto Filament Runout Sensor】Smart filament sensor can detect consumables break and consumables such as exhaustion fail to pass through the module.Besides,it can be able to detect nozzle plugs, consumables entanglements, extrusion machine failure caused by the abnormal extrusion of filament..
  • ❤【High Compatibility for Multiple Displays】Break detection sensor can support 2004LCD,12864 LCD. W hat’s more,it also supports both working modes of marlin and touch screen mode for TFT24/TFT35 E3 V3.0/TFT70 V3.0 and other touch screen of BIGTREETECH..
  • ❤【Two Extrusion Can be Realize】Support remote and direct two extrusion ways and 1.75mm diameter filament..
  • ❤【What Control Boards Can be Compatible with】 The board which has break detection interface can be used,like SKR V1.3/SKR V1.4 Turbo/SKR MINI E3/GEN L control board..
  • ❤【Firmware Modification 】 Smart filament sensor use Marlin2.0.x firmware,you follow our github guide to modify firmware of your 3D printer..
Check Stock