Reviews Miter Slider Bar

Miter T-Bar for Jigs Fixtures Sleds Router Tables and General Woodworking 48 inch MADE IN THE USA

  • When building sleds, jigs or fixtures for your woodworking projects that help keep your fixtures from moving or to help your sleds and jigs slide through a track, the Miter T Bar may just be the perfect solution. The Miter T Bar does this bit fitting neatly into most standard miter slots that measure ¾” x 3/8”. The aluminum bar can be used to slide your sleds or it can be used to lock fixtures like featherboards (when cut into smaller length pieces) in place in a miter slot..
  • The T-bar is made in the USA from a solid piece of extruded aluminum and can be cut into sections and drilled as needed. Typical uses for the T-bar are fixtures like featherboards where the featherboard needs to be kept stationary to apply consistent pressure. The T-bar also works great for sleds and other sliding fixtures like cutoff sleds on a table saw or coping sleds on a router table..
  • When mounting the Miter T-Bar it is a good idea to keep in mind that the “T” on the bottom of the track is approx. 1/8” tall, which is just enough to clear the t-slot on most miter slots. If mounted directly to platform for a sled, the tabs may catch and prevent the sled from sliding freely. To remedy this, we recommend using washers between the mounted track and the platform to....
Check Stock

POWERTEC 71156 Aluminum T-Track 48 Inch Combo with Aluminum Miter T-Bar

  • FUNCTION: The POWERTEC Miter track and bar set is designed to help build an assortment of sliding jigs and fixtures, while enhancing overall bench top table tool precision and functionality. They can be used together or separately, the miter track works with standard ¾” x3/8” miter bars and the T-bar fits standard ¾” x3/8” t-slotted miter slots..
  • APPLICATIONS: Ideal for benchtop table saws, router tables, band saws, and other woodworking shop projects that require a versatile set of miter track channels.
  • DESIGN: Both anodized aluminum extrusions possess a heavy duty construction, and feature a center guide track perfect for drilling and project alignment - The miter t-bar slides seamlessly into the miter track or t-slot.
  • SIZE SPECIFICATIONS: T-track works with ¾” x 3/8” miter gauges, with or without t-slot plate.
  • t- bars fit perfectly into t-slotted miter gauge slots - The 48" length can be custom cut to suit your individual project requirements.
Check Stock

Anodized Aluminum Miter T Track w/T-Bar Rail for Jigs Fixtures Sleds Router Tables and General Woodworking 32 inch MADE IN THE USA

  • When building sleds or fixtures, workshop tables, router table tops or any type of jig or fixture that helps hold stock in place or helps feeding stock through a cutter, miter t track will help make it so much easier. Miter T Track does this by allowing devices like miter gauges to effortlessly slide through the track for cutting applications and it can also accept fixtures with the proper hardware like featherboards to keep your stock firmly against a fence..
  • The Miter T Track has a “T” shape to it so that it can accept the discs on the ends of many miter gauges. This essentially means that your ¾” x 3/8” bar on your miter gauge will fit neatly into this track even with the disc on the end. Of course you don’t have to have a bar with the disc on the end. Wether you’re making a table top for your router, your band saw or simply building a sled, a standard ¾” x 3/8” thick bar will do the trick!.
  • The “T” shape on the Miter Track also accepts the T-bar. The T-bar has been designed to fit neatly into the miter track profile for use with jigs, fixtures or sleds. The T-bar is made from a solid piece of extruded aluminum and can be cut into sections and drilled as needed. Typical uses for the T-bar are fixtures like featherboards wher....
Check Stock

18” Precision Steel Miter Bar Rail Runner with Adjustable Spring Loaded Plungers For DIY Table Saw Crosscut Sleds, Jigs and Fixtures to Slide in 3/4 inch by 3/8 inch Miter Slots

  • Build your next table saw sled, router table jig or band saw fixture to operate with a smooth sliding action using the Fulton 18 inch Precision Steel Miter Bar! Attach the steel bar to most any type of sled, jig or fixture that is to be used with a 3/4 inch (19mm) by 3/8 inch (9mm) miter slot. Using our steel bar versus plastic or aluminum gives your sled, jig or fixture more strength and stability and it won’t bend or warp..
  • When building sleds, jigs and fixtures one of the most important aspects is to achieve a smooth sliding action without side to side play. The Fulton Precision Steel Miter Bar does both with its solid steel bar and 4 adjustable spring loaded plungers. The plungers can be adjusted with the included hex key wrench for just the right fit..
  • Not only is the Fulton Steel Miter Bar adjustable, its easy to mount! You can mount the bar from the top of your sled, jig or fixture platform or base, or you can mount it from the bottom. There are three threaded holes along the length of the bar for mounting the bar using 1/4 inch by 20 tpi machine screws (not included). There are also three counter sunk holes on the bar to mount the bar using #8 wood screws (not included)..
  • Once you mount the bars to your sled, jig or fixture you are sure to fee....
Check Stock

FTVOGUE Aluminium Alloy Miter Bar Slider Table Saw Miter Gauge Rod Wood Woodworking Tool (450mm/17.71inch)

  • This miter rod is made of high quality aluminium alloy, miter bar is of strong strength and reliable durability for several year using without abusing..
  • This is a miter bar usually used in table saw woodworking works .Universal threaded mounting holes for convenient use..
  • Adjustable stainless steel runner for perfect sliding action. For building various jigs on your table saw, like miter sleds etc..
  • Miter slot bar is easy to assemble, making it very easy to construct that ideal jig without dealing with the wood runners and the swelling issues..
  • These rockler miter bar easily in the miter slot when adjusted well, there is no side to side movement at all which makes for very accurate cuts..
Check Stock

INCRA Miter Combo Value Pack

  • Dock & Lock the included INCRA Miter Gauge in Seconds.
  • Removable t-slot retaining clips & adjustable miter bar.
  • GlideLOCK Miter Bar - The Miter 1000SE's 6 expansion disks adjust both sides of the bar for ZERO side play, anti-friction travel on all table saws....
  • Special Edition Telescoping INCRA-LOCK Fence.
Check Stock

POWERTEC 71568 Aluminum Miter T-Track with Miter T-Bar, 32-Inch

  • FUNCTION: The POWERTEC Miter track and bar set is designed to help build an assortment of sliding jigs and fixtures, while enhancing overall bench top table tool precision and functionality..
  • APPLICATIONS: Ideal for benchtop table saws, router tables, band saws, and other woodworking shop projects that require a versatile set of miter track channels.
  • DESIGN: Both anodized aluminum extrusions possess a heavy duty construction, and feature a center guide track perfect for drilling and project alignment - The miter t-bar slides seamlessly into the miter track or t-slot.
  • SIZE SPECIFICATIONS: T-track works with ¾” x 3/8” miter gauges, with or without t-slot plate.
  • t- bars fit perfectly into t-slotted miter gauge slots - The 32" length can be custom cut to suit your individual project requirements.
Check Stock

Fulton Precision Miter Gauge with a Standard Slot (3/4” x 3/8”) Steel Bar with Adjustable Spring Loaded Plungers and Removable Retaining Disc

  • If you own a table saw and you need to make a crosscut at any angle then you know how valuable a miter gauge can be. You may also know that the miter gauge that came with your saw is not terribly accurate or durable. Not to mention that the fit in the miter slot may not be all that great as well. The Fulton Miter Gauge is a high quality, well thought out and economical solution to your table saw cross cutting needs..
  • The .200” thick, adjustable, solid aluminum head is machined with 13 positive stop holes. 1 hole is at 90 degrees while the 6 holes on both sides are at 22.5, 30, 45, 60, 67.5 and 90 degrees. The positive stops are perfect for many woodworking projects as they are the angles that are typically used..
  • To adjust the head you simply loosen the post knob handle, pull the spring loaded indexing pin outward, rotate the head to the desired position, release the pin and lock into place by tightening the post knob handle. The aluminum head has two ¼” x ½” slots milled into it for mounting a miter fence if so desired. The slots are approximately 1-1/8” from the base of the miter gauge head..
  • The head is mounted to a solid steel miter bar that measure 18” in length and is .354” thick by .730” wide. Standard miter slots are 3/4” x 3/8....
Check Stock

Miter Bar, Aluminium Alloy Miter Bar Slider Table Saw Gauge Rod Woodworking Tool Durable in Use 0.374''Thickness(11.81'')

  • Miter Bar --- This is a miter bar usually used in table saw woodworking works.
  • Table Saw Miter Gauge --- Fixture jig is made of high quality materials, it is of strong strength and long durability.
  • Miter Gauge --- Universal threaded mounting holes for convenient use.
  • Miter Bars for Table Saw --- Adjustable stainless steel runner for perfect sliding action.
  • Miter Slot Runners --- For building various jigs on your table saw, like miter sleds etc.
Check Stock

POWERTEC 71146 Aluminum Miter T-Bar, 48-Inch, aluminum grey

  • FUNCTION: Ideal for creating customized high-utility sliding jigs, sleds and fixtures, while featuring a functional design that prevents play (lifting) for safer, high precision accuracy.
  • BUILD: This aluminum t-bar extrusion possesses a thick, heavy duty exterior that won’t warp or alter in shape, and is precision machined to accommodate a variety of woodworking applications, ensuring long term durability.
  • VERSATILE: A perfect fit for all 3/4" x 3/8" t-slotted -miter slots (and standard table saws with t- slotted  miter tracks), making this miter bar ideal for benchtop table-saw extensions, drill press, router table, and band-saw table applications.  Also works with for Powertec 71167, Miter T-Track, for creating extension, jigs and other woodworking requirements..
  • CUSTOMIZABLE: 48 inch profile can be custom cut to suit your individual project needs and specifications.
Check Stock