Reviews Miter Dust Bag - BestBuyersPro.com

Rousseau 5000-L Lighted Dust Solution For Miter Saws, Silver

HQRP® Dust Collector Bag with Wire Support Frame.
For Miter Saws with 2-1/2" dust port on the exterior of the saw !!! If the dust port is less than 2.5" in diameter, you will need some additional retainer..
Dimensions: L 10.75" x W 6", Diameter of ring 2 1/2".
Replacement for Hitachi part # 322955 Dust Bag.
Compatible with Hitachi 10" and 12" Miter Saw.
Collects up to 70% of dust and particles.
Easy to attach and detach to your miter saw.

【Compound Miter Saw with Powerful Motor】The 15-amp/1800W with 3800rpm motor delivers high power to smooth and fast cutting on carpentry work. And the 12-inch blade comes with sharp 40 teeth makes easy work of cutting and bevel cut. An ideal tool for fine woodworking, carpentry, general construction, and more..
【Double Bevel Saw】The double bevel design enables the saw to bevel around 0-45 degrees and the miter angle be in a range of -45-0-45 degrees, that can meet different bevel cutting needs. The cut capacity up to 4.13x13.19 inches at 90 degree and 2.36x13.19 inches at 45 degree, offers more possibilities for your work than a single-beveled miter saw..
【User-Friendly Design】With 2 extendable side pieces, the miter saw offer a larger work table to meet your requirement of large pieces cuts, and the clamping device system helps for better material support to secure work piece. An efficient dust bag is equipped to collect more than 70% of the dust produced, keeping your work environment clean and tidy..
【Precision & Safety】Adjustable miter scale with precise stops (-45°/-30°/-22.5°/-15°/0°/+15°/+22.5°/+30°/+45°) ensures clean and accurate bevel cuts. Built-in visible laser indicator for increased cutting accuracy and predictable ....

INCLUDES: C10FCH2S Miter Saw, 10" 24T TCT Saw Blade, Pivoting Flip Fence, Dust Bag, Vise Assembly (322952), 10mm Box Wrench (940543), 4mm Hex Bar Wrench, Material Support Extension.
MOTOR: 15 Amp motor, powerful for the toughest cutting jobs.
Same tools. New name. Hitachi power tools has renamed to Metabo HPT.
MITER ANGLE RANGE: 0-52 Degree miter angle range to the right and left for increased flexibility.

Includes: a carbide blade, dust bag, blade wrench and comfortable side handles in the base.
Miter detent override that allows you to override the miter stops and adjust to the desired setting without the saw slipping into the miter detents.
Adjustable stainless steel miter detent plate with 11 positive stops.
Tall sliding fences that support crown moulding up to 5-1/4-Inch. nested and base moulding up to 6-1/2-Inch vertically against the fence while easily sliding out of the way for bevel cuts.
Crosscut capacity up to 2×8-Inch dimensional lumber.
Bevels to the left up to 48° and to the right up to 3°, with positive stops at 0°, 45° and 33.9° for cutting crown moulding laying flat.
4 hardened steel bevel stops at 0°, 33.9°, 45° and 48° that delivers versatility at most common bevel angles.
Cam lock miter handle with miter detent override that eliminates the need to twist the handle to lock in on the angle.

POWER AND DURABILITY: 15 amp, 3,800 rpm motor.
MITER DETENT PLATE IMPROVES PRODUCTIVITY AND ENSURES CUTTING ACCURACY: Adjustable stainless steel miter detent plate with 14 positive stops.
MITER DENTENT OVERRIDE that allows you to override the miter stops and adjust to the desired setting without the saw slipping into the miter detents.
EASIER BEVEL CUTS: Tall sliding fences support crown molding up to 6-5/8-inch nested and base molding up to 6-1/2-inch vertically against the fence while easily sliding out of the way for bevel cuts.
CROSS CUT CAPACITY up to 2x8-Inch dimensional lumber at 90 and a 2x6-Inch dimensional lumber at 45.
DOUBLE BEVEL DESIGN: Double bevel design allows saw to bevel left and right 0 - 48 degree with positive stops at 0, 33.9, 45, and 48 degrees both left and right allowing user to flip the saw not the material.
OPTIMIZED CUTTING ACCURACY: Innovative gearbox and belt-drive design increases vertical cutting capacity.
Precise miter system and machined-base fence support optimized cutting accuracy.
LIGHTWEIGHT & PORTABLE: Lightweight design, head lock-down pin, and built-in carry handle for portability.
INCLUDES carbide blade, blade wrench, dust bag, vertical clamp and comfortable side handles in the base.

POWER AND DURABILITY: 15 amp, 3,800 rpm motor.
MITER DETENT PLATE IMPROVES PRODUCTIVITY AND ENSURES CUTTING ACCURACY: Adjustable stainless steel miter detent plate with 14 positive stops.
MITER DENTENT OVERRIDE that allows you to override the miter stops and adjust to the desired setting without the saw slipping into the miter detents.
EASIER BEVEL CUTS: Tall sliding fences support crown molding up to 6-5/8-inch nested and base molding up to 6-1/2-inch vertically against the fence while easily sliding out of the way for bevel cuts.
CROSS CUT CAPACITY up to 2×8-Inch dimensional lumber at 90° and a 2×6-Inch dimensional lumber at 45°.
DOUBLE BEVEL DESIGN: Double bevel design allows saw to bevel left and right 0 – 48 degree with positive stops at 0, 33.9, 45, and 48 degrees both left and right allowing user to flip the saw not the material.
OPTIMIZED CUTTING ACCURACY: Innovative gearbox and belt-drive design increases vertical cutting capacity. Precise miter system and machined-base fence support optimized cutting accuracy.
LIGHTWEIGHT & PORTABLE: Lightweight design, head lock-down pin, and built-in carry handle for portability.
INCLUDES carbide blade, blade wrench, dust bag, vertical clamp and comfortable side handles in the base.

INCLUDES: C10FSHCT miter saw, 10" 40T TCT Saw Blade, Dust Bag, Vise Assembly, 13mm Box Wrench.
POWER: Powerful 15 Amp motor to tackle tough cutting jobs with ease.
BEVEL ANGLE: 0-48 degree bevel angle range to the right and left allows user to quickly and easily flip the saw blade, and leave the material in place.
MITER ANGLE: 0-60° miter angle to the right and 0-55°miter angle to the left for ultra-flexibility.
COMPACT SLIDE SYSTEM: Simple and compact slide system allows the saw Head to slide along fixed rails, for zero rear clearance.