Reviews Miter Clamps

PNBO 2 Pcs 90 Degrees Positioning Squares,5.5\x 5.5\ Right Angle Clamps with 4 Clamps,Aluminum Alloy L-Type Corner Clamp Woodworking Tools,Corner Clamping Square Tool

  • New Spring Loaded Pliers and 4 spring miter clamps included - LIFETIME GUARANTEE.
  • Miter clamps spread from 0 to approximately 2 inches. No need to carry a bunch of different sizes.
  • Sharp point pierces the wood without cutting wood fibers vs the competitions angled cut.
  • Keeps any mitered corner from opening up while glue dries for the perfect finish.
  • Great for picture frames, moldings, trim work and any compound miter.
Check Stock

ZEROPLAY Miter Stop for T-Slots on Table Saws Router Tables and Band Saws.

  • Accurate miter stop that locks into the T-Track for precise stop cuts and blind rabbetting.
  • Works as an anchor for hold-downs and clamps along the miter slot.
  • Fits standard (3/4" x 3/8") T miter slots, ShopSmith and General miter tracks.
  • Make countless of small jigs just for your needs..
  • Made in the USA. 100% Satisfaction Guaranteed. 3-Year Warranty..
Check Stock

PROXXON Chop and Miter Saw KGS 80, 37160 , Green

  • For clean and safe chop and miter cuts in non-ferrous metals, plastics and wood.
  • Ideal for miter cuts, instead of swivelling the saw head, the table with clamped down work piece is turned.
  • Continually adjustable round table made of pressure-cast aluminum swivels 45 degrees in both directions with positive stops at 15 degrees intervals.
  • Integrated tightening mechanism with self-centering clamps, V-groove for round pieces, front side groove for clamping thin work pieces.
  • Scope of delivery: 1x PROXXON Chop and Miter Saw KGS 80 including carbide tipped saw blade. Part number: 37160.
Check Stock

Rockler 36'' Miter Track - Miter Slot Fits 1' x 1/2' Deep Dado & Accepts a Standard 3/4' x 3/8' Miter Bar – Premium Grade Anodized Aluminum Miter Track Slot – Comes Pre-Drilled, Countersunk w/ Four Holes

  • Rockler 36'' Miter Track Bar: Our 36” inch miter slot track expands the use of the router table by providing the use of many sleds, clamps, jigs, and other woodworking devices..
  • Perfect Application: Set up your jigs, fixtures, and shop-made router tables for a perfect smooth-sliding miter gauge. This is the ultimate table saw miter track to build your own custom table saw or router table..
  • Perfect Size: The track fits into a 1" x 1/2" deep dado and accepts a standard 3/4" x 3/8" miter bar. Adjusts for perfect sliding action in any standard miter gauge track with just a twist of the wrist..
  • Durable Material: Our woodworking jig miter slider is constructed of 100% aluminum for excellent durability without the weight..
  • Easy Install: For fast, trouble-free installation, the miter slot gauge comes pre-drilled and countersunk with four holes for #6 mounting screws (not included)..
Check Stock

O SKOOL Miter Max Corner Clamp for Woodworking Making Window Casing Making Door Casing Crafting Projects

  • Turn one-half turn of the handle, the pins will insert into the wood with rotation, make sure the wooden junction connected tightly for holding miters....
  • This miter clamp is made from heavy gauge steel and solid brass. The rustproof and rugged construction ensures these clamps will be reliable for a....
  • The pins on the miter clamp bite into the wood to keep it in place. It does leave a few dimples in the edge of the wood, but so would spring clamps or....
  • The jig's unique cam design exerts such pressure on mitre joints that wood piece can be hauled around by one leg immediately after gluing. You get a....
Check Stock

48 Inch T-Track - Miter Saw T-Track Stopper Track for Woodworking by Clear Style Profile NOT Including Stopper and Ruler

  • LIFE TIME WARRENTY - PROVIDING YOU WITH THE ACCURATE SIZE FOR YOUR CUTS.
  • SAVING COSTS - PREVENT CURRING ERRORS, MITER SAW STOP T-TRACK for JIG SAW - PACKAGE CONTAINS 1 unit of 48 inch T TRACKS.
  • WORKS WITH HOLD DOWN CLAMPS AND STOPPING BLOCKS.
  • THE RULER AND STOPPING BLOCKS PURCHASE SEPARATE, PERFECT use for hold-down Clamps measuring either 5-1/2 x 1-1/8-inch or 3-1/2 x 3/4-inch..
  • ORDER NOW!!! 100% SATISFACTION GUARANTEE: If you don't love our MITER SAW TRACK - please return for a 100% refund,.
Check Stock

DWE7402DI Dado Throat Plate, Table Saw Parts Insert Accessories Replacement for 10-Inch Portable Table Saw DEWALT DWE7490, DWE7491 Versiones

  • ...e of all aluminum to ensure its durability and firmness, rust and wear resistance, and the table saw miter gauge fence is made of aluminum alloy die-casting, which has better accuracy. high..
  • ❤[With clamp] The table saw miter gauge is composed of a miter gauge clamp, a material baffle, and an angle push plate. The clamps can be adjusted by screws to fix different cutting objects, which is not possible with other mitre gauges without a holder. The bottom of the mitre gauge is equipped with a 5/8 groove for the mitre gauge, and the all-aluminum slide bar slides smoothly ..
  • ❤ [Easy to operate] The miter gauge is cut at a precise angle of 60° on both sides with pointers. If you need to adjust the head, you only need to loosen the column knob and rotate the head to the desired position, so loosen the knob to quickly adjust the angle. It is very suitable for cutting wood at a specific angle and can help you achieve a perfect cut..
  • ❤ [Perfect wood cutting project] Table saw miter gauge is widely used in woodworking DIY, very suitable for wood cutting projects: it can be used for table saws, band saws, planers, lockstitch machines, joints, miter fence systems are currently A must-have for every family. If there is a product quality problem or any problem....
Check Stock

Miter gauge,Table saw miter gauge,Table saw fence system,Miter gauge table saw accessories,With clamping device,Precision Miter Gauge,For table saw 5/8 slot with miter gauge fence

  • ...e of all aluminum to ensure its durability and firmness, rust and wear resistance, and the table saw miter gauge fence is made of aluminum alloy die-casting, which has better accuracy. high..
  • ❤[With clamp] The table saw miter gauge is composed of a miter gauge clamp, a material baffle, and an angle push plate. The clamps can be adjusted by screws to fix different cutting objects, which is not possible with other mitre gauges without a holder. The bottom of the mitre gauge is equipped with a 5/8 groove for the mitre gauge, and the all-aluminum slide bar slides smoothly ..
  • ❤ [Easy to operate] The miter gauge is cut at a precise angle of 60° on both sides with pointers. If you need to adjust the head, you only need to loosen the column knob and rotate the head to the desired position, so loosen the knob to quickly adjust the angle. It is very suitable for cutting wood at a specific angle and can help you achieve a perfect cut..
  • ❤ [Perfect wood cutting project] Table saw miter gauge is widely used in woodworking DIY, very suitable for wood cutting projects: it can be used for table saws, band saws, planers, lockstitch machines, joints, miter fence systems are currently A must-have for every family. If there is a product quality problem or any problem....
Check Stock

POWERTEC 71395 Taper/Straight Line Jig for Table Saws with 3/4” Wide by 3/8” Deep Miter Slot

  • ASSEMBLY CONTAINS: 36” Miter Bar, Base, Adjustable Fence, Knob, Hold Down Clamps, Tape Measure, Abrasive Grip Strips, T-Bolts, Hardware Screws, Washers and Mini Screw Driver.
  • FUNCTIONS: Primarily serves as a taper cutting jig for table saw – Secondarily operates as a stable straight line ripping jig – Your creativity is the limit.
  • FEATURES: A safe and easy-to-use design, indexing marks for easy angle setting, 5 star knobs and hold down clamps to prevent shifting stock, abrasive grip strips to help stabilize your workpiece and detailed instructions for all skill levels.
  • PREMIUM BUILD: This woodworking taper jig is manufactured with high quality components.
  • The base measures 32” x 7-7/8” ½” with MDF construction and melamine coating on both sides.
  • VERSATILE: Perfect for cutting tapered compound angles, straight line table saw ripping, making handmade furniture, and a wide range of applications such as making chair legs, building tables, custom built shelves or base cabinets and more. PLEASE NOTE: It fits tight and securely in any standard 3/8" x 3/4" miter slot..
Check Stock

3-1/2\ To 4-1/2\ Universal Fence Clamp 2 Pack

  • Our 525 Large Coping Sled works on both the router and shaper, either in the miter slot or against the fence. This is the safest and most accurate way to make cope cuts and other cross-cuts on a router table or shaper. Don't try to cope without it! Two adjustable feed handles provide firm control over the sled and your work..
  • Includes an 11-3/4" adjustable steel miter bar that mounts in 6 different locations for best placement. Can also be used without the miter bar against your fence..
  • Holds stock up to 10" wide. Heavy duty 1/2" phenolic base (15-3/4" x 15-3/4") will not distort from clamp pressure..
  • Features one 500 lb. Outboard Toggle Clamp and two 500 lb. Inboard Toggle Clamps. Hold stock up to 1-3/4" thick, or 2-3/4" with optional 6305R Riser Kit (one Riser Kit required for each toggle clamp). Fence is 24” long. Optional 525S Flip Stop available for repetitive work..
  • Lifetime guarantee against defects in material or workmanship. Made in the USA!.
Check Stock