Reviews Misting Nozzle

Fogland 32FT Misting Cooling System 10PCS Stainless Steel Misting Nozzles with 20PCS Tap Water Pressure Misting Nozzles Outdoor Cooling System for Garden Terrace Trampoline

  • 【Easy to use】: Fogland misting cooling system can be used in combination, and the operation is very simple. Just screw the nozzle into the interface corresponding to the misting line and install the cooling equipment at the position you want.
  • 【Wide range of uses】: Fogland misting products can be used not only for cooling but also for irrigation and dust removal. When you clean up, you can also use it, or water your green plants, which can save more water resources and your time.
  • 【 High-quality material】: Fogland misting nozzles are made of stainless steel, which can be dismantled and cleaned. There is no need to worry about the blockage of the nozzle. The UV material used in the misting line of the misting equipment is not easy to break and prevent leakage.
  • 【Better atomization effect】: Fogland combination sales of misting products, there are two kinds of flow size nozzle, can meet your more needs.
  • 【Get more】: You can get more on this product. You can get 30 stainless steel nozzles, 32ft Misting line and complete installation accessories at a time, which can save your cost.
Check Stock

HYDRO MASTER 0179101 Universal Outdoor Misting System Calcium Inhibitor Filter (2 pcs)

  • [ Solid Brass Misting Nozzles and Plug ] The misting nozzles and the plug are mechanically carved from the brass rod. Each nozzle or plug contains a black gasket, good sealing..
  • [ 0.0197" Orifice (0.5 mm) Excellent Misting Effect ] The orifice of the misting nozzles and plugs is 0.5mm（0.0197"), so it will produce tiny and soft mist to make excellent cooling misting in hot summer. Diameter: 0.9cm(0.35"), Height: 1cm(0.39").
  • [ 10/24 UNC Standard Thread ] The thread of the nozzles and plugs is 10/24 UNC, and matches many kinds of tee connectors widely. Such as the 1/4" tee connector, 1/2" turn 1/4" tee connectors, standing misting nozzle connector and so on..
  • [ Product Included and Water Setting ] Product included: 10pcs mist nozzles and 2pcs mist plugs. Water Setting: 2-2.3GPH(us gal per hour), 0.2-0.6MPA. It's suggested to install less than 30pcs nozzles on one water line to make an excellent misting effect in common faucet/tap water pressure in the U.S..
  • [ Wide Range of Use in Hot Summer ] The nozzles are used in misting system to make cooling misting, the plugs are used to stop somewhere you don't want to mist some time. It's widely used to make outdoor cooling system, agriculture irrigation system, standing misting system, trampoline misting, de....
Check Stock

Aqur2020 4Pcs 3/16 Stainless Steel Misting Nozzle + Misting Ring Spray Cooling System Set Stainless Steel Outdoor Cooling System

  • High quality misting nozzle and misting ring outdoor misting spray cooling kit.
  • It is welded by stainless steel pipe, the number of nozzles is four, 3/16 size nozzle.
  • Stainless steel misting ring, comes with four misting nozzles, convenient and practical to use.
  • Easy to use, simply connect to your outdoor fan and fix the garden hose adapter to the water supply.
  • Wide range of application, suitable for residential patio misting, outdoor cooling and mist cooling application.
Check Stock

Misting Nozzles Kit Include Water Misting Nozzle Tees Thread 1/4 Inch and Brass Orifice Nozzle with Black Plug for Outdoor Spray Cooling System (72 Pieces in Total)

  • Sufficient quantity: we provide you with 30 pieces water misting nozzle tees, 36 pieces brass nozzles and 6 pieces black plugs, sufficient quantity is enough for daily use and replacement, nice accessories can be replaced at will, bringing more convenience.
  • Product dimension: each tees thread can be connected by many kinds tube which is 1/4 inch.
  • The nozzle orifice diameter is 0.01 inch, the operation pressure is 2-70 kg/ cm, the sprayed water mist is uniform and fine, energy-saving and water-saving, without electricity.
  • Durable quality: our spray cooling device made of quality material, the misting nozzle tee connector is made of POM material, sturdy and long-lasting, the misting nozzles is made of brass material, not easy to rust and corrode.
  • Simple operation: these water misting cooling nozzle set are easy to install, just connect suitable water pipes to both ends and screw on the nozzles, water mist can be produced after turning on the water source.
  • Effective for cooling: these brass misting nozzle tees kit are suitable for use in summer, it can effectively reduce the outdoor temperature.
  • The sprayed fine water mist can reduce the temperature by 20 degrees, it is the nice accessory for outdoor occasions.
Check Stock

Misting Nozzles Kit Include Water Misting Nozzle Tees Thread 1/4 Inch and Brass Orifice Nozzle with Black Plug for Outdoor Spray Cooling System (48 Pieces in Total)

  • Sufficient quantity: we provide you with 20 pieces water misting nozzle tees, 24 pieces brass nozzles and 4 pieces black plugs, sufficient quantity is enough for daily use and replacement, nice accessories can be replaced at will, bringing more convenience.
  • Product dimension: each tees thread can be connected by many kinds tube which is 1/4 inch.
  • The nozzle orifice diameter is 0.01 inch, the operation pressure is 2-70 kg/ cm, the sprayed water mist is uniform and fine, energy-saving and water-saving, without electricity.
  • Durable quality: our spray cooling device made of quality material, the misting nozzle tee connector is made of POM material, sturdy and long-lasting, the misting nozzles is made of brass material, not easy to rust and corrode.
  • Simple operation: these water misting cooling nozzle set are easy to install, just connect suitable water pipes to both ends and screw on the nozzles, water mist can be produced after turning on the water source.
  • Effective for cooling: these brass misting nozzle tees kit are suitable for use in summer, it can effectively reduce the outdoor temperature.
  • The sprayed fine water mist can reduce the temperature by 20 degrees, it is the nice accessory for outdoor occasions.
Check Stock

NCElec 15M Drip Irrigation Kit,Adjustable Misting Cooling System for Automatic Garden Plant Greenhouse

  • 【Packing】1pc * 1/4” PE tubing( 15M ).
  • 1pc * 1/2″& 3/4″ threaded faucet connector.
  • 【Adjustable Drip Irrigation Emitters】Each misting nozzle can be adjusted, allowing to set each plant to receive its customized watering according to its precise needs..
  • 【Easy to Install】Heat the PE hose first (using hairdryer or hot water) and then install the nozzles for easy assemble ,without digging or plumbing skills.
  • 【Complete Drip Irrigation System】This drip irrigation kit contains all the parts to start a system from a faucet or a garden hose and can be expanded to cover up to 20-25 square meters of irrigation area.
  • 【Save Water and Money】The misting system can save up to 70% in water savings. Great for agriculture, lawn, garden, patio, greenhouse, swimming pool misting fog cooling irrigation..
Check Stock

Gesentur Drip Irrigation Kit, 26.2ft (8M) Misting Cooling System, Adjustable Automatic Micro Drip Irrigation System Suit for Garden Landscape, Flower Bed Patio, Greenhouse, Plants

  • 【Product Included】: 8 x T-Connector Misting Nozzles, 2 x L-Connector Misting Nozzles..
  • 【Brass Misting Nozzles】: These mist nozzle is made from brass material. The holding part is made from plastic material..
  • 【Misting Cooling Effectively】: Misting range: 20-40 inch, cools the surrounding air temperatures up to 20 degrees..
  • 【Wide Application】: These misting nozzle is the necessary accessories to make fan misting system, mist cooling system, plant watering system..
  • 【Suit for 1/4” tubing】: US standard size, can be connected by many kinds tube which is 1/4 inch..
Check Stock

Gaeirt Misting, Stainless Steel Misting Stainless Steel Pipe Spray Cooling System for Outdoor Cooling and Mist Cooling Application

  • 【Better Customer Service】If you have any questions, please contact our customer support team. We will try our best to solve the problem for you..
  • 【Stainless Steel】It is welded by stainless steel pipe, the number of nozzles is four, 3/16 size nozzle,Stainless steel misting ring, comes with four misting nozzles, convenient and practical to use.
  • 【High Quality】High quality misting nozzle and misting ring outdoor misting spray cooling kit.
  • 【Easy to Use】Simply connect to your outdoor fan and fix the garden hose adapter to the water supply.
  • 【Wide Range of Application】Suitable for residential patio misting, outdoor cooling and mist cooling application.
Check Stock

Hylaea 20pcs/Pack 0.4mm Orifice Thread 10/24 UNC, Outdoor Brass Misting Nozzles, Brass Fog Mist Nozzles for Greenhouse Garden Landscaping Dust Control and Outdoor Cooling System

  • The Brass and Stainless Steel Misting Nozzle is the most efficient and water-conservative mist nozzle available today. It only uses 1/2 gallon per hour per nozzle and features a sturdy brass body with stainless steel orifice. The nozzle requires simple maintenance: just soak periodically in misting nozzle cleaner to remove mineral deposits that may accumulate with usage. Includes: 5 Misting Nozzles.
  • HIGH-QUALITY CONSTRUCTION: Brass and stainless steel nozzles are sturdy and long-lasting..
  • WATER EFFICIENT: Cool down without wasting water. These nozzles require minimal water use of 1/2 gallon of water per hour per nozzle..
  • COMPATIBLE WITH ORBIT MIST SYSTEMS: Screw into any 10/24 threaded mist nozzle opening..
  • PRODUCT SPECIFICATIONS: For outdoor use with cold water only. Do not use in freezing temperatures..
Check Stock

Misting System for Patio 80Ft (24M), Water Mister for Cooling Outdoor, Backyard Misters for Outside Patios, Mist System for Greenhouse, Garden, Waterpark, Deck, Canopy,Gazebo,Porch,Umbrella,Yard Hose

  • 【Misting Cooling system for Outdoor】The fantastic misters for outside patio provides a natural water cooling area, release you from the indoor bad air conditions and enjoy the fantastic outdoor sight in hot summer, cools the surrounding air temperatures up to 20℃ or 68℉..
  • 【Brass Adapter, 3/4" US Standard Size】: The misting system adapter is made of high-strength brass material, with precise internal thread design, 3/4" US standard size, suitable for water hoses, faucets, timers, filters, and other equipment.
  • The sealing tape effectively prevents water pressure displacement..
  • 【DIY Design, Easy to Install】 80 FT misting hose, with 24 x T-Joints and a misting hose cutter, you can more freely customize the length and angle you want. All the accessories you need are provided, and your idea of ​​your own misters for outside patio can be realized in ten minutes..
  • 【Brass Misting Nozzle, High-quality UV Mister Hose】Precision misting brass nozzle, forged with sophisticated technology, combines the design of the rotating nozzle structure, effectively preventing water leakage and falling off, the service life is 2.5 times than others.
  • and the mister system has is a high-quality white UV misting hose, anti-ultraviolet, prevent yellowing..
Check Stock