Reviews Mini Rebar Cutter

VEVOR Hydraulic Rebar Bender 1700 Wattage Electric Rebar Bender and Cutter, 1''/25 mm Max Rebar Diameter, Rebar Steel Bender and Cutter Machine, Bending Machine For Bending Rebar, Steel Bar, Steel Rod

  • Ultra-Fast Working Speed: This rebar bender and cutter machine is designed with excellent performance. It helps save valuable person-hours by bending rebar 1/4'' #2 to 1" #8 Grade 60(6 to 25 mm) within 6 to 7 seconds. It can also cut rebar within 5-6 seconds. Bending Angle: 0-180°. Bending Radius: 1.57'' / 40 mm, Max. Rebar Hardness: HRC30, Hydraulic Oil Type: VG46..
  • 1700W Pure Copper Coil Motor: This rebar cutter and bender features a 1700W pure copper motor, which can run quietly with low noise and significantly improve your working efficiency, reducing unnecessary wear. Besides, a copper motor can extend this rebar bender cutter's operating life to a large extent. Voltage: 110V, Frequency: 60 Hz, Amps: 14A, Noise: 92 dB(A)..
  • Angle Adjustment Knobs: This rod bending machine has two slide-type angle selectors, which can help you accurately bend any angle from 0-180 degrees. Preset angle locks are designed for repeating the same angle bending. When bending processing, the angle of point 1 must be bigger than point 2. Otherwise, the machine can not operate normally..
  • Sturdy Machine Body: The bar bender machine adopts a sturdy iron machine body and durable Idler Wheel. Ø78 iron Gyre Idler Wheel and Ø94 Fixed Idler Wheel are stronger and not easy t....
Check Stock

VEVOR 1.5KW Electric Rebar Bender, 1''(25mm) Hydraulic Electric Hand Held Rebar Bender & Happybuy Electric Rebar Cutter, 1.7KW 110V Electric Hydraulic Rebar Cutter

  • ...ressure relief valve and a hydraulic-powered piston for strong thrust and less power consumption. After the steel bar is successfully bent, you can pull the pressure relief valve to move the steel, and the piston will return to its original position..
  • Product 2: Super-Fast Cutting Speed: The electric hydraulic rebar cutter cuts rebar within 3-5.5 seconds without sparks and sentiments. Cutting capacity ranges from 3/20" (4 mm) #3 to 1" (25 mm) #8 Grade 60. It satisfies your various cutting demand. Cut rebar types: medium carbon rebar, low carbon rebar, round rebar, screw thread steel, etc..
  • Product 2: Pure Copper Coil Motor: 1700W pure copper coils motor, driven by a hydraulic pump to ensure that the electric rebar cutter has higher reliability and excellent motivation yet low noise. The motor runs more smoothly to achieve a minimum friction and power consumption..
  • Product 2: High-quality Steel Blade: We utilize upgraded steel blades that would not deform easily and serve you longer with sophisticated blade processing technology and strict quality control. And multiple screw fixed head offers quick and accurate cutting while providing additional stability and sealability..
  • Product 2: Adjustable Bolt Design: An adjustable bolt on the portable rebar cutter ....
Check Stock

WORX 20V 3'' Cordless Mini Cutter WX801L.1 Compact Angle Grinder Tool w/ 2 Cutting Discs, 2.0Ah Battery & Charger Included

  • [ Ergonomic Design ] - WORX Angle Grinder weighs only 3.4 pounds (tool only),which is compact and light weight. Ergonomic design for one-hand operation and good approachability, even in narrow spaces and overhead work..
  • [Highly Versatile] Highly versatile for different materials, ideal for cutting metal materials, tile, thin concrete, plastic and more..
  • [ High Cutting Efficiency ] - WORX mini cutter features a powerful motor to produce 19500 no load RPM for cutting metal, tile, and plastic materials..
  • [Longer Runtime] With a 2.0Ah battery, WX801L.1 is able to cut 71 pieces M8mm rebar, twice than other cutter competitors in the market..
  • [SHARE BATTERIES, SAVE MONEY] - WORX Power Share is compatible with all WORX 20v, 40v and 80v tools, outdoor power and lifestyle products..
Check Stock

KwikSafety (Charlotte, NC) PINZA Ironworker Pliers Spring Loaded Action Side Cutters Steel Rebar Cut Diagonal Wire Cutters Bi-Material Tempered Handles & Aggressive Cross-Hatched Knurl Lineman Pliers

  • PEAK PERFORMANCE - The PINZA Lineman Pliers designed to cut & twist rebar tie wire. Heavy duty wire cutters made from alloy steel (no rust pliers)! Industrial handle tempering absorbs the "snap" when cutting. Features deep knurl channels to provide a strengthened grip power for twisting & pulling. Rebar wire pliers w/ induction hardened knives for easy cuts & longer life. Durable plastic-dipped handles w/ a polymer rubber coat for greater grip & (1) 135° bent handle for added pulling leverage..
  • RELIABLE SIDE CUTTER PLIERS - These linesman pliers feature a spring loaded handle for self-opening & an angled head design for better rebar tying performance. Lightweight rebar pliers (12 oz total weight) w/ an overall length of 9.19in (23.3 cm). Square nose side cutter linemans pliers w/ jaw thickness dimensions of 1.28in (3.3 cm) x 1.156in (2.9 cm) & a knife length of 0.625in (1.6 cm). High leverage design & hot riveted joint ensures a greater cutting tool & gripping power (NO handle wobble)!.
  • UTILITY STEEL PLIERS - The KwikSafety PINZA ironworkers pliers combine secure jaw grip w/ powerful cutting & features more plier cutter power over standard cutting pliers. The perfect cutters pliers for the home, workshop or jobsite! Long "handform" handles & heavy-dut....
Check Stock

DEWALT SDS MAX Bit for Rotary Hammer, 4 Cutter, 2-Inch x 22-1/2-Inch (DW5831)

  • Extreme durability: IRON BLAST TECHNOLOGY of the SDS max bits strengthens the bit.
  • 2X longer life: DEWALT SDS hammer drill bits have a full carbide head in 4 cutter design.
  • Stands up to rebar strikes: Redesigned head geometry to withstand rebar strikes.
  • Wear mark indicator: For accurate diameter of holes.
Check Stock

DEWALT Drill Bit, SDS MAX, 1-3/4-Inch x 22-1/2-Inch (DW5830)

  • Extreme durability: IRON BLAST TECHNOLOGY strengthens the drill bit.
  • 2 times longer life: DEWALT drill bits have full carbide head in 4 cutter design.
  • Stands up to rebar strikes: Redesigned head geometry to withstand rebar strikes.
  • Wear mark indicator: For accurate diameter of holes.
  • NO BREAK GUARANTEE: If your bit fails for any reason while the wear mark is still visible, we'll replace it (excludes: DW5861, DW5830, DW5831).
Check Stock

NEIKO 30065A 1/4\ Air Saber Body Saw 10,000 RPM 2 Air Saw Blades for Cutting Aluminum, Plastic, Fiberglass, & Sheet Metal ¼” NPT Air Inlet 90 PSI 6 CFM Pneumatic Tool, Mini Reciprocating Saw

  • [ Ergonomic Design ] - WORX Angle Grinder weighs only 3.4 pounds (tool only),which is compact and light weight. Ergonomic design for one-hand operation and good approachability, even in narrow spaces and overhead work..
  • [Highly Versatile] Highly versatile for different materials, ideal for cutting metal materials, tile, thin concrete, plastic and more..
  • [ High Cutting Efficiency ] - WORX mini cutter features a powerful motor to produce 19500 no load RPM for cutting metal, tile, and plastic materials..
  • [Longer Runtime] With a 2.0Ah battery, WX801L.1 is able to cut 71 pieces M8mm rebar, twice than other cutter competitors in the market..
  • [SHARE BATTERIES, SAVE MONEY] - WORX Power Share is compatible with all WORX 20v, 40v and 80v tools, outdoor power and lifestyle products..
Check Stock

DEWALT Drill Bit, High Impact, 4 Cutter, SDS MAX, 1-1/2-Inch x 31-Inch x 36-Inch (DW5859)

  • Extreme durability: IRON BLAST TECHNOLOGY strengthens the drill bit.
  • 2 times longer life: Full carbide head in 4 cutter design of drill bits for wood, metal and plastic.
  • Stands up to rebar strikes: Redesigned head geometry of DEWALT drill bits is made to withstand rebar strikes.
  • Wear mark indicator: For accurate diameter of holes.
  • NO BREAK GUARANTEE: If your bit fails for any reason while the wear mark is still visible, we'll replace it (excludes: DW5861, DW5830, DW5831).
Check Stock

ESCULTORA 2PCS 18 8 Inch Alloy Steel Bolt Cutter, Lock Cutter with Rubber Handle, Wire Cutters for Chain, Barbed Wire, Lock, Cable Ties, Padlocks, Edge Banding, Box Spring

  • PREMIUM MATERIAL - This chain cutter is made of high-strength alloy steel with excellent quality, the cutting blade is heat treated, which is strong and sharp, durable and resistant to damage from hard metals..
  • ERGONOMIC HANDLE - The handle of the cable cutter is made of PP+TPR rubber, which is non-slip and durable. At the same time, 18inch bolt cutters with a long lever handle, make the work easier and labor-saving..
  • WIDE APPLICATION - Steel cutter heavy duty are widely used, ideal for tight cutting, can be used for chain, cable ties, circuit boards, padlocks, wires, barbed wire, box spring etc. Bolt cutter pliers are the perfect must-have tool for electricians..
  • PACKAGE INCLUDES - Bolt cutter tool includes one 18-inch wire cutter (maximum support for cutting 8mm rebar), one 8-inch wire cutter. When you go out, the small bolt cutter can be put directly into the tool bag for your convenience and work more comfortably..
  • GUARANTEE for YOU - We are committed to providing you with first-class quality assurance. If you have any quality problems with ac cable cutters or are damaged during transportation, please contact us in time, and we will solve the problem for you as soon as possible..
Check Stock

Yougfin 17-Piece SDS-Plus Rotary Hammer Drill Bits and Chisel Set, Carbide-Tipped Masonry Drill Bits and Chisels for Concrete, Stone, Brick, with Storage Case

  • ...ure】: Assortment comes with a combined 17pcs hammer drill bits and chisels added: 13 Masonry Bit Set (5.5-16mm, approximately 3/16"-5/8"), 1 Point Chisel, 2 Flat Chisels and 1 U-Groove Chisel. What's more, a portable carrying case is also included.
  • 【Four Cutter Design+SDS Plus Shank】: Yougfin tweaked the design to feature a solid carbide 4-cutter head with a rebar guard. The bits also have sharp centering tips that give you exact spot drilling in both concrete and metal decking. The SDS Plus Shank is adapted to most hammer drills on the market and provides aggressive gripping power.
  • 【Wide Application】：Rotary drill and hammer drill bits make holes in hard, brittle materials such as brick and cinder block for setting fasteners such as concrete anchors and tapping screws. This head design helps prevent lock-up in rebar, reducing downtime and also remove dust faster while reducing heat.
  • 【Intimate Service】： If you have any questions about Yougfin products, please feel free to contact us. Our aim is to provide you with quality service at any time.
Check Stock