Reviews Mini Breadboard
AITRIP 10PCS for Nano V3.0 ATmega328P Nano Board CH340 5V 16M Microcontroller Board, Compatible with Arduino Electronics Development Board
- This board is using the chips ATmega328P and CH340, not FT232 as official Arduino.
- More Breadboard Space:Nano's got the breadboard-ability of the Boarduino and the Mini USB with smaller footprint than either, so users have more breadboard space. It's got a pin layout that works well with the Mini or the Basic Stamp (TX, RX, ATN, GND )on one top, power and ground on the other..
- The Nano can be powered via the Mini-B USB connection, 7-12V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source..
- It is a smallest, complete, and breadboard friendly board. It has everything that Diecimila/Duemilanove has (electrically) with more analog input pins and onboard +5V AREF jumper..
- you will get 10pcs Mini Nano V3.0 ATmega328P 5V 16M Microcontroller.
Check StockELEGOO Nano Board CH 340/ATmega+328P Without USB Cable, Compatible with Arduino Nano V3.0 (Nano x 3 Without Cable)
- It is a smallest, complete, and breadboard friendly board. It has everything that Diecimila/Duemilanove has (electrically) with more analog input pins and onboard +5V AREF jumper..
- Nano's got the breadboard-ability of the Boarduino and the Mini+USB with smaller footprint than either, so users have more breadboard space. It's got a pin layout that works well with the Mini or the Basic Stamp (TX, RX, ATN, GND on one top, power and ground on the other)..
- The Nano can be powered via the Mini-B USB connection, 7-12V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source..
Check StockMBSS Mixed Solderable Breadboard Proto Board PCB Pack
Check StockMini Nano V3.0 ATmega328P Microcontroller Board w/USB Cable for Arduino
- ...ou need an older driver, pls get it from GitHub—please read the link that follows immediate. http://sparks.gogo.co.nz/ch340.html.
- More detals on how to use it please refer to: http://audiodiwhy.blogspot.com/2018/05/one-cheap-arduino-nano-clone-o-plus-one.html.
- Small Arduino UNO Board:It is a smallest, complete and breadboard friendly board. It has everything that Arduino/Genuino UNO has (electrically) with more analog input pins and onboard +5V AREF jumper.More Breadboard Space:Nano's got the breadboard-ability of the Boarduino and the Mini+USB with smaller footprint than either, so users have more breadboard space. It's got a pin layout that works well with the Mini or the Basic Stamp (TX, RX, ATN, GND on one top, power and ground on the other)..
- Specification:The Nano can be powered via the Mini-B USB connection, 7-12V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source.Usage: The Nano is 100% compatible with Arduino, with the same chips ATmega328P and CH340 with the official version..
Check StockDORHEA 4Pcs for Nano V3.0 ATmega328P Nano Board CH340 5V 16M Micro USB Microcontroller Board with PIN Headers Pin Unsoldered Compatible with Electronics Development Board Nano 328P Nano 3.0
- The Nano for motherboard can be powered via the Mini-B USB connection, 6-20V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source..
- The nano has 8 analog inputs,each of which provide 10 bits of resolution.By default they measure from ground to 5 volts, though is it possible to change the upper end of their range using the analogReference function. Analog pins 6 and 7 cannot be used as digital pins, some pins have specialized functionality..
- It is a smallest, complete and breadboard friendly board. It has everything that board has (electrically) with more analog input pins and on board +5V AREF jumper, compatible with Windows, Mac and Linux operating system..
- More breadboard space:Nano's got the breadboard-ability of the Mini USB with smaller footprint than either, so users have more breadboard space. It's got a pin layout that works well with the Mini or the Basic Stamp (TX, RX, ATN, GND )on one top, power and ground on the other..
- This board is using the chips ATmega328P and CH340, not FT232, Support ISP download.
Check StockAITRIP 3pcs for Arduino Mini Nano V3.0 ATmega328P 5V 16M Micro Controller Board Module with 3pcs USB Cable Compatible with Arduino IDE
- *The Nano is using the chips ATmega328P and CH340, Replace FT232RL..
- *It is a smallest, complete, and breadboard friendly board. It has everything that Diecimila/Duemilanove has (electrically) with more analog input pins and onboard +5V AREF jumper..
- *Nano's got the breadboard-ability of the Boarduino and the Mini+USB with smaller footprint than either, so users have more breadboard space. It's got a pin layout that works well with the Mini or the Basic Stamp (TX, RX, ATN, GND on one top, power and ground on the other)..
- *The Nano can be powered via the Mini-B USB connection, 7-12V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source..
- *Arduino Nano V3.0 ATMEGA328P Improved version with 3pcs pin headers (2pcs 15pin headers +1pcs 6pin headers)..
Check StockThe Complete Country Guitar Method Compilation: Three Books in One! - Master Country Guitar Licks, Techniques & Soloing (Learn How to Play Country Guitar)
- ...ou need an older driver, pls get it from GitHub—please read the link that follows immediate. http://sparks.gogo.co.nz/ch340.html.
- More detals on how to use it please refer to: http://audiodiwhy.blogspot.com/2018/05/one-cheap-arduino-nano-clone-o-plus-one.html.
- Small Arduino UNO Board:It is a smallest, complete and breadboard friendly board. It has everything that Arduino/Genuino UNO has (electrically) with more analog input pins and onboard +5V AREF jumper.More Breadboard Space:Nano's got the breadboard-ability of the Boarduino and the Mini+USB with smaller footprint than either, so users have more breadboard space. It's got a pin layout that works well with the Mini or the Basic Stamp (TX, RX, ATN, GND on one top, power and ground on the other)..
- Specification:The Nano can be powered via the Mini-B USB connection, 7-12V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source.Usage: The Nano is 100% compatible with Arduino, with the same chips ATmega328P and CH340 with the official version..
Check StockKEYESTUDIO MEGA Prototype Shield V3 Board for Arduino Mega, with 170 Points Breadboard Solderable, Easy to Use, Great for Prototyping Circuit Building Projects
- Keyestudio MEGA ProtoShield makes it easy to design circuits and solder electronics. All the pads are tinned and easy to solder to..
- The extra GPIO pin header on the right side is left empty making easier to install one according to the user's preference..
- Be able to attach a Mini breadboard to make various circuit experiments. You can weld elements on the shield's prototyping area or connect circuits with tiny breadboard..
- Better than most Arduino proto shields. It would be the best choice for you to use with Arduino MEGA controllers for either solder projects or prototyping..
- MEGA Protoshield V3 for Arduino with mini breadboard are in good quality and well packed. Nice yellow on black color scheme..
Check StockACEIRMC for Arduino Nano V3.0, Nano Board CH340/ATmega328P Without USB Cable, Compatible with Arduino Nano V3.0 (6 Pack)
- download the driver of Nano V3.0 at: http://bit.ly/2jKlJMO.
- Nano's got the breadboard-ability of the compatible for Board and the Mini+USB with smaller footprint than either, so users have more breadboard space. It's got a pin layout that works well with the Mini or the Basic Stamp (TX, RX, ATN, GND on one top, power and ground on the other)..
- The Nano is using the chips ATmega328P and CH340, not FT232 as official compatible for Arduino, so pls. use the driver from above link..
- It is a smallest, complete, and breadboard friendly board. It has everything that Diecimila/Duemilanove has (electrically) with more analog input pins and onboard +5V AREF jumper..
Check StockGoupchn Mini Grabber Test Hooks to Breadboard Female Jumper Wires Soft Flexible Silicone Test Leads for Electrical Testing
- Test leads are made of high quality silicone material. Silicone can help with longevity and easy of use. Silicone leads are soft and resistant to high and low temperature..
- Mini grabber test hook clips are made of copper alloy. High quality, strong electrical conductivity, firm and difficult to bend and deform..
- The other end of the test wires is female jumpers for breadboard projects, which is pure copper insulated for smooth conductivity. Suitable for connecting a wire to breadboard from power supplies, LED strips, multi-meters and Lilypad..
- Perfect for electrical and electronic testing. They're also suitable for Arduino, Raspberry Pi, Orange Pi, wearable circuit projects or a breadboard experiment..
- Package include: 10PCS Minigrabber Test Hook to Breadboard Female Jumper Wires 5 colors. Length: about 27.2cm. 5 colors help you distinguish them well when doing testing..
Check Stock