Reviews Mini Angle Gauge

COMeap (2-Pack) Motherboard ATX Mini 4 Pin to 2X Right-Angle SATA Hard Drive HDD Power Adapter Cable for Lenovo 18-inch(46cm)

  • 『Mini 4P - 2x Right-Angle SATA』Mini 4 Pin port plugs into Lenovo motherboard (NOTE: It is mini 4 pin port, not standard 4 pin port. Please refer to the image 2nd for mini 4 pin port's dimension.), Right-angle 15 Pin SATA port plugs into the hard drive.
  • 『Connectors』Connector A: ATX 12V mini 4 pin (NOTE: not standard 4 pin. Please refer to the image 2nd for mini 4 pin port's dimension), Connector B: 2x Right-angle SATA 15 pin (compatible with the equipment with sata port such as: liquid CPU cooler, mechanical hhd and ssd).
  • 『Compatibility』ONLY compatible with Lenovo motherboard with mini 4 pin port including: M410 M415 M510 M510S M510A M610 M710 B415 B250, Thinkcentre m720 tower, ThinkSystem ST50 Servers, ThinkCentre M710t.
  • (NOTE: It is mini 4 pin port, not standard 4 pin port. Please refer to the image 2nd for mini 4 pin port's dimension.).
  • 『Parameter』Gauge: 18AWG, Length(including connectors): 18 inches(46cm)，Between 2 SATA: 2.36 inches(6cm),Between 2 SATA: 8 inches(20.5cm), Quantity: 2 pieces, Self-adhesive tape*1pcs.
Check Stock

(4) Rockville RMC65LB 6.5\ 1200w Black Marine Speakers w/Multi Color LED+Remote

  • ...ished Silver Wakeboard Tower Speaker w/ Built in LED's. Peak Power Handling per speaker: 300 Watts. RMS Power Handling per speaker: 150 Watts. Frequency Response: 50Hz to 20kHz. Sound Pressure Level: 90dB. Impedance: 4 Ohm. Polished silver stainless steel enclosure. Aluminum Mounting Bracket. Quick and Easy Speaker Angle Adjustment. Bracket rotates 360 degrees. 1" Titanium Dome Tweeter..
  • Features of ATOM S30: Rockville ATOM S30 2400 Watt Peak/600 Watt Dyno-Certified RMS 4 Channel Class AB Marine Stereo Amplifier. Dyno Certified RMS Power Ratings: (Certified Dyno Test / Less than 1 % THD) (Use these ratings when comparing with top brands such as Kicker, Rockford Fosgate, etc). 2 Ohm: 150 Watts x 4 Channel 003c1% THD+N @ 14.4 Volts. 4 Ohm: 100 Watts x 4 Channel 003c1% THD+N @ 14.4 Volts. 4 Ohm Bridged: 300 Watts x 2 Channel 003c1% THD+N @ 14.4 Volts..
  • Features of RMWK4: Rockville RMWK4 4 AWG Gauge Waterproof Marine/Boat Amplifier Wire Installation Kit. 20 � Translucent, Twisted Pair, High Quality, Tinned-OFC Flexible PVC RCA Cable. 18� 4 Gauge High Current, Low Impedance, Clear Flexible Power Cable with 3� Black Poly Woven Mesh to better resist chemicals in the battery compartment. 18� 4 Gauge High Current, Low Impedance, Light Blue, Flexible Gro....
Check Stock

Laser Angle Finder Line Digital Level Tool, Woodworking Tools, 5-Side Magnets Miter Saw Protractor, Electronic Level, Measures & Sets Angles, Hanging Pictures, Carpenters, Class II line

  • 【This Is No Ordinary Angle Measuring Tool】You're probably familiar with digital angle gauges but not like this one.
  • It comes with a built in laser line, large, easy to read..
  • 【Get Accurate Measurements With Ease】The digital level and angle gauge may be small in size, but it's big on convenience.
  • This angle finder tool measures, sets, angles laser line, which will also tell you if a surface is level..
  • 【Blending Convenience With Comfort】The pocket level and angle finder features sturdy V groove edges, a strong 4-side magnetic base . When upside down, the LED display auto rotates, so you'll always have a clear view.
  • All of this in a device that fits in your pocket or the storage bag that comes included..
  • 【Used In Many Settings】Turn to this mini digital level angle gauge for straightforward tasks like leveling pictures on a wall and more complex jobs like working with landscape drains, gutters, or measuring pinion angles on a car.
  • This tool is used for woodworking, plumbing, construction, machinery, telecommunications, automotive, and more..
Check Stock

General Tools 102 0-Inch to 1-Inch .001-Inch Graduation Micrometer

  • 【Material】- This Angle gauge set is made of high quality stainless steel, high hardness, and durable in use..
  • 【Parameter】- 60 Degree cutting tool for the inspection of tooth‑shaped 55 degree angle and metric thread and inch thread, and also it can measure blade angles..
  • 【Comprehensive Angle Range】- This set of drill bits gauge has a comprehensive angle range: 60 °, 70 °, 90 °, 110 °, 118 °, 125 °, 135 °, 150 ° and 160 °..
  • 【Suitable Utilization】- Diameter drill front edge of the protractor 50 gauge 118 ° angle twist drills grinding gauge is suitable for 118 ° diameter of less than 50mm grinding twist drills..
  • 【Professional Measurement Tool】- This is a practical set of angle gauge set in drill bits angle measuring and drill sharpener inspection..
Check Stock

COMeap HDD SATA Power Cable Right-Angle SATA 15 Pin x2 to Mini 6 Pin ATX Adapter for Dell Inspiron 3653 3650 Series Compatible Part No. GP2JM 14.5-inch(37cm)

  • ( Note: Do not support the DELL OptiPlex series such as 3020 3046 5040 7020 7040 9020 SFF T1700.
  • 『Connectors』Connector A: ATX 12V mini 6 pin (NOTE: It is mini 6 pin port, not standard 6 pin port.), Connector B: 2x Right-angle SATA 15 pin, please note that the sata port is right-angle (compatible with the equipment with sata port such as: liquid CPU cooler, mechanical hhd and ssd).
  • 『Mini 6P – 2x Right-Angle SATA』Mini 6 Pin port plugs into the motherboard (NOTE: It is mini 6 pin port, not standard 6 pin port.), 15 Pin SATA port plugs into the hard drive.
  • Compatibility』Compatible with DELL Inspiron series such as: 3653 3650 3655 3250 3252 3268 3660 3667 3668 3670 V3668.
  • 『Parameter』Gauge: 18AWG with braided sleeves for easy cable management, Length(including connectors): 14.5 inches(37cm)，Between 2 SATA: 2.36 inches(6cm), Self-adhesive tape*1pcs.
  • 『Note』This cable was only designed for some types of DELL Inspiron series as listed. If you connect it with other incompatible motherboards, it will burn or damage the motherboard and we won’t take any responsibility for wrongly using or installing. Please carefully check the compatible types or contact us if you are not sure about it.
  • ( Please purchase the mini 8 pin to SATA adapter for D....
Check Stock

Angle Gauge CNC Lathe Machining Tool Laser Engraving Stainless Steel Inspection Tool

  • Eight angle can be measure:29 / 30 / 40 / 45 / 50 / 55 / 60 / 65 Deg.
  • It is most useful for checking tool angle while cutting threads in metal turning lathes. The angles on the thread cutting tool is checked on the V slots in the gauge.
  • Laser engraving ensures that numbers are clear and not easy to wear.
  • Stainless steel,not easy to deform and rust,highly durable.
  • Mini size and light weight ,can be put in shirt pocket for carrying.
Check Stock

Neiko 20699A 1/2\ Drive Torque Angle Gauge, Clear

  • Torque angle gauge is used specially for later model engines that require a torque to yield fastener.
  • Easy to use arm attachment is used for holding the gauge in place for an undisturbed work flow while turn plate makes it easy to zero out the gauge.
  • 360 degree scale is large and easy to read with 30 degree intervals and 10 degree increments.
  • Specs: the angle gauge has a 1/2 inch male and female square drive ratchet handle.
  • Gauge measures angle of rotation after pre-torque in torque-angle applications.
Check Stock

GemRed 82412 Mini Digital Level Angle Gauge Angle Finder Protractor Inclinometer Aluminum Framework with Magnet

  • 【Great Repeatability and Consistency】This angle gauge is designed with accuracy of ± 0.2° and the resolution is 0.1°. The measuring range: 0 to 360° (4*90°). Display unit: DEGREE only. It provides convenience in woodworking, construction, machinery, telecommunications, automobile etc. It is pre-calibrated in factory..
  • 【Strong Aluminum Framework&Magnetic Flat Base】The digital angle gauge applied sturdy aluminum alloy instead of plastic for the main framework. It’ll provide years’ usage.【Two Measuring Mode】①Checking the true level. ②Checking the relative angle between two surfaces..
  • 【Lower Power Reversible LCD Display with ERROR indicator】 The Digital Angle Gauge has a large LCD display with backlight, which only needs one battery for providing accurate, quick and clear measurements and even you can easily read in dark environment. If the digital angle gauge is used in an incorrect position (e.g. tilts diagonally over 30 degree), display will tell ERROR to make sure that use is getting the accurate measurement..
  • 【Easy Battery Installation】You can install battery easily and need no screwdriver. WIth only one AAA battery, the digital angle gauge works 50 hours averagely. *Automatic shut-off after 5 minutes..
Check Stock

COMeap Motherboard ATX Mini 8 Pin to 2X Right-Angle 15 Pin SATA Hard Drive HDD Power Adapter Cable for Dell OptiPlex Series 3020 5040 7020 9020 14.5-inch(37cm)

  • 『Connectors』Connector A: ATX 12V mini 8 pin (NOTE: not standard 8 pin), Connector B: 2x Right-angle SATA 15 pin (compatible with the equipment with sata port such as: liquid CPU cooler, mechanical hhd and a ssd).
  • 『Parameter』Gauge: 18AWG with braided sleeves for easy cable management, Length(including connectors): 14.5 inches(37cm)，Between 2 SATA: 2.36 inches(6cm).
  • 『Note』This cable was only designed for some types of DELL OptiPlex series as listed. If you connect it with other incompatible motherboards, it will burn or damage the motherboard and we won’t take any responsibility for wrongly using or installing. Please carefully check the compatible types or contact us if you are not sure about it.
  • 『Compatibility』Compatible with DELL OptiPlex series such as 3020/3040/5040/7020/7040/9020 MT, T1700MT.
  • 『Mini 8P – 2x Right-Angle SATA』Mini 8 Pin port plugs into the motherboard (NOTE: It is mini 8 pin port, not standard 8 pin port.), 15 Pin SATA port plugs into the hard drive.
Check Stock

Drill Angle Gauge, 3Pcs Drill Bits Angle Gauge Set Dirll Sharpener Tools S/S Angle Measuring Gage Drill Bit Angle (60 °, 70 °, 90 °, 110 °, 118 °, 125 °, 135 °, 150 °, 160 °)

  • 【Material】: This Angle gauge set is made of high quality stainless steel, high hardness, and durable in use..
  • 【Design】: It is a practical Angle gauge set in drill bits Angle measuring and drill sharpener inspection,and comes with a case, convenient for carrying out..
  • 【Feature】: Diameter drill front edge of the protractor 50 gauge 118 ° apex angle of twist drills grinding gauge suitable for 118 ° apex diameter of not more than 50mm of grinding twist drills..
  • 【Drill Apex Angle】: Check the drill apex angle (60 °, 70 °, 90 °, 110 °, 118 °, 125 °, 135 °, 150 °, 160 °). Cutting tool angle is 60 degrees for a tooth-shaped angle 55 degree angle and metric thread, inch thread inspection, blade and special measuring tools for measuring angles.
  • 【Usage】: Suitable For: Angle measurement.
Check Stock