Reviews Mineral Hydraulic Oils

Apache 98399065 1/4\ x 24\

  • Pre-coupled. An excellent hose for use with petroleum based hydraulic fluids within a temperature range of -40°F to +212°F. Also handles fluids like gasoline, diesel fuels, mineral oils, glycol, lubricating oils, water, etc. Coupled 1/4" solid male pipe thread on each end, hose and couplings meet or exceed SAE J517 100R2AT specifications..
  • Maximum Operating Temperature: 212 deg. F.
Check Stock

SAE O-Ring BOSS Hydraulic 212 Piece O Ring Assortment Seal Kit Buna-N 90 for Hydraulic Fittings Hoses

  • For use across a wide temperature range from -30 degrees F to 250 degrees F, Good/Excellent resistance to many petroleum oils/greases, hydraulic fluids, alcohol, mineral oil and grease.
  • Oil resistant applications of all types. Low temperature military uses. Off-road equipment. Automotive, marine, aircraft fuel systems. 70 Durometer.
  • Compatible with Aliphatic Hydrocarbons (propane, butane, petroleum oil, mineral oils and greases, diesel fuel and fuel oil).
  • Not Compatible with product fuels with a high aromatic content.
  • Chlorinated hydrocarbons (Trichloroethylene).
  • Buna N or Nitrile has good mechanical properties when compared with other elastomers and high wear resistance.
Check Stock

Sterling Seal ORBN022x50 Number-022 Standard O-Ring, Buna Nitrile Rubber, 70 Durometer Hardness, 1' ID, 1-1/8' OD (Pack of 50)

  • For use across a wide temperature range from -30 degrees F to 250 degrees F, Good/Excellent resistance to many petroleum oils/greases, hydraulic fluids, alcohol, mineral oil and grease.
  • Oil resistant applications of all types. Low temperature military uses. Off-road equipment. Automotive, marine, aircraft fuel systems. 70 Durometer.
  • Compatible with Aliphatic Hydrocarbons (propane, butane, petroleum oil, mineral oils and greases, diesel fuel and fuel oil).
  • Not Compatible with product fuels with a high aromatic content.
  • Chlorinated hydrocarbons (Trichloroethylene).
  • Buna N or Nitrile has good mechanical properties when compared with other elastomers and high wear resistance.
Check Stock

VEVOR Hydraulic Hose 3/8 inch x 100 ft, Coiled Hydraulic Hose 4800 PSI, Rubber Hydraulic Hose with 2 High-Tensile Steel Wire Braid, Bulk Hydraulic Hose -20°C to 140°C, Hydraulic Oil Flexible Hose

  • 【DURABLE MATERIAL】- The innermost tube and the outer protective cover are constructed of synthetic rubber. The outermost is cover by fabric. The inner material is two high-tensile steel wire braid reinforcement layers..
  • 【100 FT HYDRAULIC HOSE】- The coiled hydraulic hose is 100 ft long in total, the inner diameter is 3/8 inch, and the outer diameter 3/4 inch. With a 4800 PSI working pressure, the hydraulic line is explosion-proof..
  • 【HIGH STRENGTH】- The bulk hydraulic oil hose is constructed of synthetic rubber to resist oil and chemicals, while the outer cover also protects the hose from weather, ozone, abrasion, and corrosion..
  • 【INCREDIBLE FLEXIBILITY】- Wire hose layers provide flexibility and versatility to allow you to install your rubber hose and hydraulic fittings in tight quarters for less vulnerability. It can work between -40 °C and 121 °C..
  • 【VARIOUS USES】- The hose is suitable to carry petroleum, mineral oils, emulsion, hydrocarbons, and water-based hydraulic fluids. It is ideal for construction, agriculture, and other machinery that uses a hydraulic system..
Check Stock

Prolong Super Lubricants PSL10020 Anti-Friction Metal Treatment, 1 Gallon

  • Works with all brands of synthetic and petroleum-based oils. Including full synthetic, semi- synthetic, conventional, and mineral. Gas or Diesel engines..
  • Recommended to be used in all automobile, truck, lawn, marine, agriculture and heavy-duty equipment..
  • Increases horsepower, lowers operating temperatures and reduces engine noise and vibration in all engines..
  • USAGE: Use 2 ounces per quart of oil in crankcases, 3 ounces for heavy duty and towing applications. Transmissions (Automatic or Manual) Use 1 ounce per quart of transmission fluid. Differentials use 1 ounce per quart of differential fluid. Power steering systems use 1 ounce per quart of fluid. Hydraulic fluid 1 ounce per 2.5 gallons of hydraulic fluid. Motorcycles 1 ounce per quart of fluid max. Lasts multiple fluid changes but maybe used more frequently for best results..
Check Stock

Motorkote MK-HL32-06 Heavy Duty Hyper Lubricant Engine Treatment, 32-Ounce, Single, Black

  • Works with all brands of synthetic and petroleum-based oils. Including full synthetic, semi- synthetic, conventional, and mineral. Gas or Diesel engines..
  • Recommended to be used in all automobile, truck, lawn, marine, agriculture and heavy-duty equipment..
  • Increases horsepower, lowers operating temperatures and reduces engine noise and vibration in all engines..
  • USAGE: Use 2 ounces per quart of oil in crankcases, 3 ounces for heavy duty and towing applications. Transmissions (Automatic or Manual) Use 1 ounce per quart of transmission fluid. Differentials use 1 ounce per quart of differential fluid. Power steering systems use 1 ounce per quart of fluid. Hydraulic fluid 1 ounce per 2.5 gallons of hydraulic fluid. Motorcycles 1 ounce per quart of fluid max. Lasts multiple fluid changes but maybe used more frequently for best results..
Check Stock

Johnsen's 5594 Hydraulic Jack Oil - 32 oz.

  • STA-LUBE: Sta-Lube offers a range of high performance industrial greases, gear oils, service oils, fluids, hand cleaners, additives, and lubrication formulas. Our products have been rigorously tested to meet the highest quality standards..
  • HYDRAULIC & JACK OIL: Our formula is a medium weight hydraulic oil blended of a high quality paraffinic base oil with anti-rust, anti-oxidation, anti-foam, anti-wear, and seal swell additives..
  • FORMULATION: This oil is a 20W, non-detergent oil that is compatible with all hydraulic fluids, and protects all parts in hydraulic jacks over a wide temperature range..
  • APPLICATIONS: Our hydraulic oil can be used for hydraulic systems and fluid drive units, and added to existing fluids. However, it is not suggested for use in hydraulic brakes..
  • PRODUCT SPECIFICATIONS: Available in a 32 fl. oz. or 1 qt bottle, and is made in the USA..
Check Stock

Hein-Werner HW93291 Blue Premium Hydraulic Jack Oil - 1 Quart

  • Bio-Bottle Jack hydraulic fluid is a biobased, biodegradable and environmentally non-toxic hydraulic oil for use in general purpose hydraulic systems.
  • Specially designed to be a direct replacement for petroleum oil based hydraulic fluids in mobile and stationary hydraulic vane, piston and gear type pumps.
  • This patented technology provides superior oxidation stability and longer fluid life compared to other vegetable based hydraulic oils.
  • It meets or exceeds the requirements for type I, II and III hydraulic tools.
  • Bio-Bottle Jack hydraulic fluid is ultimately biodegradable1 vegetable based formula.
Check Stock

Gunk Liquid Wrench M3332 Hydraulic Jack Oil - 32 oz.

  • 6,000 HOUR SEVERE SERVICE - Extremely long life fluid, with very long oxidation life. 3 times the life of most other fluids..
  • ANTI-WEAR BOOSTER PACK - Contains a built-in severe service anti-wear booster pack. Three times the zinc of most other hydraulic oils..
  • HIGH VISCOSITY INDEX - Ultimate durability in all types of service. It does not overheat, prevents hydraulic cavitation, maintains fluid seals on pistons, and does not shear..
  • ZERO FOAMING - Virtually zero foaming on all industry-standard tests and ultra-rapid air release..
  • SAVES 50%- 80% on fluid costs annually vs regular or economy hydraulic oils..
Check Stock

TRUEGARD Hydraulic Oil AW 32 55-Gallon Drum

  • 6,000 HOUR SEVERE SERVICE - Extremely long life fluid with very long oxidation life. Three times the life of most other fluids..
  • ANTI-WEAR BOOSTER PACK - Contains a built-in severe service, anti-wear booster pack. Three times the zinc of most other hydraulic oils..
  • HIGH VISCOSITY INDEX - Ultimate durability in all types of service. It does not overheat, it prevents hydraulic cavitation, maintains fluid seals on pistons, and does not shear..
  • DIRECT OEM FLUID REPLACEMENT for CAT HYDO 10 and CAT HYDO 10 Advanced OEM fluids..
  • ZERO FOAMING - Virtually zero foaming on all industry-standard tests and ultra-rapid air release. SAVES 40%- 80% on fluid costs annually versus regular or economy hydraulic oils..
Check Stock