Reviews Mighty Mini Saw Sled

Rockler Clamp-It Corner Clamp Jig - Glass-Filled Polycarbonate Woodworking Clamps - Corner Clamps to Hold Panel Parts Together - Right Angle Clamp for Fastening Work - Woodworking Tools

  • Table Saw Miter Sled: This is the perfect table saw sled, no adjustments needed! Simply cut one piece on the leading face, one on the trailing face, and voila! Since both pieces reference off a perfect 90-degree angle, the miters will fit perfectly..
  • 45 Degree Miter Sled: This table saw sled system gives you an exact 45-degree cut every time. Our table saw miter is great for picture frames or anytime accurate corner. Miters cuts are needed..
  • Adjusting Miter Track Fit: Use a 7/64" hex wrench (not included) to advance the nylon set screws in the Rockler 45 degree miter sled bar until you achieve a smooth, no-slop fit in your saw’s miter track..
  • Standard Slot: Through slots in the base allow you to securely clamp moldings at table level. This table saw miter sled fits standard 3/8" x 3/4" miter slots..
  • Easy To Use: The table saw accessories miter can be easily drilled to add extended fences and stops. Pre-installed adjustable nylon pins provide a no-slop fit to the miter track..
Check Stock

Rockler 45 Degree Miter Sled for Table Saw - Miter Saw Sled Ensures Durability & Low-Friction Sliding - Table Saw Accessories Fits Standard 3/8\ x 3/4\ Miter Slot – Fence Accessories

  • Table Saw Miter Sled: This is the perfect table saw sled, no adjustments needed! Simply cut one piece on the leading face, one on the trailing face, and voila! Since both pieces reference off a perfect 90-degree angle, the miters will fit perfectly..
  • 45 Degree Miter Sled: This table saw sled system gives you an exact 45-degree cut every time. Our table saw miter is great for picture frames or anytime accurate corner. Miters cuts are needed..
  • Adjusting Miter Track Fit: Use a 7/64" hex wrench (not included) to advance the nylon set screws in the Rockler 45 degree miter sled bar until you achieve a smooth, no-slop fit in your saw’s miter track..
  • Standard Slot: Through slots in the base allow you to securely clamp moldings at table level. This table saw miter sled fits standard 3/8" x 3/4" miter slots..
  • Easy To Use: The table saw accessories miter can be easily drilled to add extended fences and stops. Pre-installed adjustable nylon pins provide a no-slop fit to the miter track..
Check Stock

DIY Crosscut Table Saw Sled Kit with Specific Guide Booklet to build your own crosscut sled for More Accurate and Safer in Saw Working, pack of 1

  • （Attention: The UHMW bars are not in 3/4″ by 3/8″ size）DIY your own crosscut sled – You may build your own unique sled to fit your table saw.
  • Make your desired crosscut sled size and meet your unique cutting requirements..
  • Accurate & Safe – Great improve cutting accuracy and make saw operations safer, and steady the work piece while shielding your finger from harm..
  • Quality Kit – UHMW bar is the most often used material in crosscut sled runners and it does not flex under sudden temperature changes and slides more smoothly as there is less friction.
  • The aluminum T track is solid extruded and can be trimmed to match your sled. (ATTENTION: The bars Do Not fit RYOBI table saw track slots).
  • Fun of DIY – Not only can you create your own unique table saw sled but also you can enjoy the processing of DIY, more motivated and confident in the following saw working..
  • Package Included – 2 UHMW bars, 2 T tracks, 1 star knob and bolt, wood secrets of varying lengths, and 1 specific guide booklet (glue and other building materials are not included).
  • Backs its products within 90 days warranty.
  • Please feel free to contact us with any questions you may have..
Check Stock

Table Saw Small Parts Crosscut Sled - Table Saw Sled Kit Includes Blade Guard Miter Track Stop – 900 Angle Small Moldings Crosscut Saw - Table Saw Sled Features Zero-Clearance Support

  • Crosscut Sled For Table Saw: This miniature cross cut sled lets you use your table saw to cut small parts to length. Our sled includes a miter track....
  • Great for cutting: Our crosscut sled is great for cutting dowels, tenon stock, and small moldings at a precise 90° angle, with little to no tear-out..
  • Zero-Clearance Support: This sled system features zero-clearance support, which reduces the chance of small pieces getting stuck between the blade and....
  • Extremely Durable: Our aluminum table saw sled is ideal for constant repetitive use. This zero clearance table saw insert does not absorb moisture and....
  • Fits Most Table Saws: A small plastic ramp on one side of the kerf carries the drop-off piece away from the blade. The rear-mounted blade guard is....
Check Stock

Rockler Table Saw Small Parts Sled

  • Sled base and fence provide zero-clearance support—just run it through your saw to locate the kerf.
  • Sled rides in miter track of your table saw—included miter slot stop limits forward travel of sled.
  • Rear-mounted blade guard is adjustable to fit most table saws.
  • Aluminum T-track on top edge of fence lets you add a flip stop (not included) for repeatable cuts.
  • Short T-track parallel to blade accepts an optional T-track hold-down clamp (sold separately).
Check Stock

The Original Dubby Cut-Off • Cross Cut Sled for Cutting Precise Accurate Miters with a Table Saw (Left Side Dubby Sled)

  • THE ORIGINAL DUBBY SLED From standard 4 sided panel cutting to the absolutely stunning heptagon frame you will be completely accurate with the angles on your mitered projects with the Dubby Sled. The Dubby will allow you to make perfect cuts the first time you do them and keep your creative juices flowing with idea after idea. It is ideal for making frames but it also works very well for the cutting of tiny pieces while keeping your fingers out of harms way..
  • WORKING WITH LARGE PANELS The Dubby has the capacity to crosscut panels up to 24″ wide x 52″ long, and allows you to do them safely. Since the panels don’t make contact with the table saw top, “walking” of the material is virtually eliminated. This will allow you to cut perfectly square panels for your furniture and cabinet making projects quickly, easily and accurately..
  • WORKING WITH ANGLES The Dubby angle scale is the simplest, most accurate and easiest to read scale available. Being about 15-20 times more accurate than the average miter gauge, the scale has pre-determined lines for any shape (from 4 to 16 sides) you want to cut. This means no calculations, no hassles, and best of all, no test cuts for perfect results.
  • WORKING WITH SMALL PIECES- No miter gauge on the market can offer yo....
Check Stock

The Original Dubby Cut-Off • Cross Cut Sled for Cutting Precise Accurate Miters with a Table Saw (Left Side Dubby and Right Side Dubby Sleds are Included)

  • THE ORIGINAL DUBBY SLED From standard 4 sided panel cutting to the absolutely stunning heptagon frame you will be completely accurate with the angles on your mitered projects with the Dubby Sled. The Dubby will allow you to make perfect cuts the first time you do them and keep your creative juices flowing with idea after idea. It is ideal for making frames but it also works very well for the cutting of tiny pieces while keeping your fingers out of harms way..
  • WORKING WITH LARGE PANELS The Dubby has the capacity to crosscut panels up to 24″ wide x 52″ long, and allows you to do them safely. Since the panels don’t make contact with the table saw top, “walking” of the material is virtually eliminated. This will allow you to cut perfectly square panels for your furniture and cabinet making projects quickly, easily and accurately..
  • WORKING WITH ANGLES The Dubby angle scale is the simplest, most accurate and easiest to read scale available. Being about 15-20 times more accurate than the average miter gauge, the scale has pre-determined lines for any shape (from 4 to 16 sides) you want to cut. This means no calculations, no hassles, and best of all, no test cuts for perfect results.
  • WORKING WITH SMALL PIECES- No miter gauge on the market can offer yo....
Check Stock

The Original Dubby Cut-Off • Cross Cut Sled for Cutting Precise Accurate Miters with a Table Saw Right Side Dubby Sled

  • THE ORIGINAL DUBBY SLED From standard 4 sided panel cutting to the absolutely stunning heptagon frame you will be completely accurate with the angles....
  • WORKING WITH LARGE PANELS The Dubby has the capacity to crosscut panels up to 24″ wide x 52″ long, and allows you to do them safely. Since the....
  • WORKING WITH ANGLES The Dubby angle scale is the simplest, most accurate and easiest to read scale available. Being about 15-20 times more accurate....
  • WORKING WITH SMALL PIECES- No miter gauge on the market can offer you the margin of safety provided by the Dubby Sled. The versatile hold-down clamp....
  • WILL THE DUBBY FIT YOUR SAW? The Dubby sled is compatible with most cabinet and contractor table saws. However, your table saw should fall within the....
Check Stock

INCRA MITER5000 Miter 5000 Table Saw Miter Gauge with Sled and Telescoping Fence

  • Capitalizing on a great idea, the folks at Incra.
  • The sled with T-track and clamping fixture secures the work piece as one solid unit for precision cross-cutting at any angle.
  • The right-hand portion of the sled, once cut.
  • Table saw that blends incremental angle control and a special 3-panel sled.
  • Precision angle indexing teeth are laser cut in solid steel.
Check Stock

Edsrdux DIY Table Saw Crosscut Sled Kit, Smooth No Residue, for Crosscut sleds Jigs, Fixtures or Miter Slots (Size 3/4″ x 3/8″).

  • Kit contains: Our crosscut sled kits come in red- 3/4″x3/8″x36″ 2 pcs.
  • white- 3/4″x3/8″x19″ plus 1 foot primary color T-track, 2 pcs.
  • white- 3/4″x3/8″x48″ 2 pcs. Make your crosscut sled any size for your table saw and cutting requirements..
  • High Quality Material: UHMW is a linear polyethylene with a molecular weight of 3,000,000 to 6,000,000. Thus, it is ten times heavier than regular high density polyethylene, and extremely durable for extensive use..
  • Smooth & No Residue: UHMW bars produce less friction than wood, perfect for runners for crosscut sleds. Furthermore, UHMW doesn’t expand or contract like wood during extreme weather changes. Each bar measures 3/4″ x 3/8″, fitting most standard table saw slots. Unlike wooden bars, UHMW bars are slick, leaving no residue, dust, or shavings behind..
  • Outstanding Impact Strength: With outstanding impact strength even at low temperatures, our crosscut sled kits are ideal for jigs, fixtures, or 3/4″ x 3/8″ miter grooves on table saws, bandsaws, or router tables..
  • Please note: UHMW poles tend to bend during shipping but are easily adjusted..
Check Stock