Reviews Micrometer Gauge Set

6 Pcs 5/16\ to 6\ Telescopic Gauge Bore Gauge Telescoping Gage Set High Precision T Bore Hole Gauge Bore Measurement Tool

  • 【Easy to Adjust】This telescopic bore gauge set allow the most pinhole gauge on the retractable gauge to enter, can quick check holes, slots and recess up to 6" deep..
  • 【Bore Gauge Material】 The bore gauges are made of carbon steel with chrome plating on the surface.Telescoping Gage Set has nickel-plated finished and good side arc so that the product has a long service life..
  • 【Bore Gage Packing】Total 6Pcs cylinder bore gauges in a ethylene plastic bag, range: 5/16" - 6" (8mm to 150mm), (1 gage: 5/16 - 1/2" range x 4.20" overall.
  • 1 gage: 1/2 - 3/4" range x 4.40" overall.
  • 1 gage: 3/4 - 1-1/4" range x 4.40" overall.
  • 1 gage: 1-1/4 - 2-1/8" range x 5.85" overall.
  • 1 gage: 2-1/8 - 3-1/2" range x 5.85" overall.
  • 1 gage: 3-1/2 - 6" range x 5.85" overall)..
  • 【Peration Method】 Use the small hole gauge to expand in the hole to be measured, lock it in place, and then take it down, and measure with bore micrometer or caliper to determine the final hole size..
  • 【Unique Design】 The spring tension of bore measuring tool ​gives uniform contact pressure, can detect the inner diameter in a hole (or groove).Spring of telescopic gauge loads with knurled locking knob and knurled holding area..
Check Stock

VEVOR Micrometer Set 0-6' Machinist Tool Micrometer Set 0.0001' Accuracy 6 Pcs Precision Machinist Tool Set Micrometer, Laser-Etched Micrometer with Calibration Standards, Wrench

  • [ 6 Pcs Micrometer Set ]: Micrometer set includes 6 micrometers with measuring range: 0-6" (0-1"/1-2"/2-3"/3-4"/4-5"/5-6"),and microfine Graduations is 0.0001",also the accuracy is 0.0001",ensure a precise measurement every time..
  • [ Calibration Standards & Wrench ]: The micrometer set comes with 5 calibration standards and 1 adjustment wrench,which provides you precise adjustment solutions..
  • [ Precision Machinist Tool ]: It works with high accuracy of 0.0001'', Micro-lapped carbide tipped measuring face make more accurate reading,and the laser-etched graduations will never fade..
  • [ Durable Material Micrometer ]: The outside micrometers are made of heat and corrosion resistant cemented carbide and cast Iron, which makes it work perfect in different condition. Satin chrome finish on thimble and sleeve is rustproof and reducing glare..
  • [ Wide Application for Your Needs ]: This outside micrometer set is ideal for DIY, Hobbyists, CNC Machinists, Fabricators, Automotive Mechanics, and Inspection Tools etc,help you measure the outside dimensions of raw materials, whole workpieces and more of metalworking and other industrial measure needs..
Check Stock

Fowler 54-220-777-1, IP54 Digital Micrometer Head with 0-1\/25mm Measuring Range

  • Micrometer Head: For general purpose measuring applications.
  • carbide-tipped measuring face with an accuracy of 0.00012″/0.003mm for precise readings.
  • Precision Measurements: This digital micrometer with a 0-1"/25mm range has a friction thimble that provides smooth and quiet performance and is suitable for one-handed operation.
  • Easy to Use: Digital micrometer head features an LCD that performs direct inch/metric conversions and has a switchable resolution of 0.00005"/0.001mm.
  • meets IP54 specifications for dust and water protection.
  • Data Output: Digital micrometer with RS-232 output that provides the ability to export readings to a computer (cable not included).
  • Set Includes: Fowler micrometer head, a spare battery, and a battery removal tool.
Check Stock

Premium Outside Micrometer Set 0-4\ / 0.0001\ (0-1\/1-2\/2-3\/3-4\) Precision Machinist Tools w/Carbide Tips, Standards, Ratchet Stop

  • HIGH-PRECISION MEASURING TOOL SET: Set includes a 4 carbide outside micrometers, calibration standards, and adjusting wrenches packaged neatly in a padded hard shell case. Every order you will receive a set of 0-1" / 1-2" / 2-3" / 3-4" outside micrometers with microfine Graduations: 0.0001" and Accuracy: ±0.0001" for precise readings every time.
  • FRICTION/RATCHET-STOP THIMBLE: Each micrometer has a metal ratchet-stop thimble with a speeder knob to reduce the time it takes to open and close the micrometer. To Prevent over tightening the constant-force mechanism stops the micrometer’s spindle from tightening once it contacts the surface of the measured object.
  • EXCLUSIVE RED COLOR FINISH: We believe your tools should work great and be something you're proud to display. That's why we have designed this exclusive Direct-Reading Vernier Scale Micrometer set unlike any of the others. The red textured design and satin chrome thimble helps resist rust, reduce glare and are easily identifiable in your shop.
  • WIDE VARIETY OF USES: This Outside Micrometer Set is Perfect for DIY, Hobbyists, CNC Machinists, Fabricators, Automotive Mechanics, and Inspection Tools. Sandor Tools Outside Micrometers help you measure the outside dimensions (OD) of raw materials, whole wo....
Check Stock

Megaforce

  • 1 x 2.5mm Nozzle (1 nozzle was pre-installed to the spray gun).
  • 1x True Micrometer Air Regulator with Gauge.
  • This spray gun set is designed to provide equal atomization and partical size for all kinds of surface painting..
  • It has control knobs for full adjustment over spray pattern, fluid control and air pressure. Contains 1.4mm/1.7mm/2.5mm stainless steel needles and nozzles set to meet your different applications.
  • Light weight, ergonomic design and easy trigger pivot reduces operating fatigue..
  • Ideal for spraying base coats, clear coats and other high viscosity coatings such as extreme high build or polyester primers, thick enamels, latex paints, chip guard, metal flakes, gel coats, liquid mask, etc. Two years warranty..
Check Stock

INSIZE 5013-E Measuring Tool Set, 13 Piece

  • Includes: Electronic caliper, range 06-"/0-150mm, resolution . 0005"/0. 01mm (1108-150).
  • Outside micrometer, range 0-1", graduation . 0001" (3202-1).
  • Dial indicator, range 1", graduation . 001" (2307-1). Magnetic stand (6201-60).
  • Protractor, range 0-180°, graduation 1° (4799-180). Pitch gauge, range 4-42TPI, 30pcs, unified 60° thread (4820-230).
  • Radius gauge, range 1/32"-1/4" (4801-15E). Feeler gauge, range . 0015-. 035", 31pcs (4608-31).
  • 90° bevelled edge square, 3. 937x2. 756", grade 0 (4790-1000). Scriber (7230).
  • Zero setting bar for depth base attachment..
Check Stock

Fowler 52-240-006-1 Outside Inch Micrometer with 5-6 Measuring Range

  • Micrometer: The Fowler series of outside micrometers features exceptional quality and accuracy with a ratchet thimble.
  • Accurate Readings: Micrometer has microfine 0.0001" graduations and accuracy of ±0.00025".
  • carbide-tipped anvil and spindle have 0.256" measuring....
  • Easy-to-Read Display: Distinct figures and graduations on the micrometer permit easy reading that allows for measuring with extra ease and comfort.
  • Durable Construction: Hardened, precision-ground, and carbide-tipped anvil and spindle with microfine graduations.
  • Set Includes: A Fowler micrometer with ratchet thimble, a standard, a wrench, and a fitted case.
Check Stock

Fowler 52-224-103-0, Digit Counter Micrometer Set With 0-3' Measuring Range

  • Digit Micrometer: Digit display has 0.001" graduations with a resolution of 0.0001" on the sleeve and an accuracy of 0.00016" (0-1” unit) for precise readings.
  • Accurate Readings: Outside micrometer set has a 0" to 3" measuring range and flat anvil/spindle pair with 0.256" diameter measuring faces for general purpose measuring.
  • Optimum Performance: Hardened, ground and lapped spindle thread provides smooth movement, accuracy, and long life.
  • ratchet stop provides a constant force for repeatability between users.
  • Durable Construction: Features thermal insulated frame.
  • blue baked-enamel frame provides durability and is heat-insulated to reduce temperature-related expansion or contraction for more accurate measurements.
  • Set includes: The digit micrometer set includes 0 to 1", 1 to 2" and 2 to 3", standard micrometers, a spanner wrench, and a shop hardened case for storage.
Check Stock

Fowler 52-229-214-0 Economy Outside Micrometer Set with 0–4 Range (Set of 4)

  • Micrometer Set: With flat anvil/spindle for general purpose measuring.
  • microfine graduations and carbide-tipped measuring faces.
  • High Accuracy Micrometer Set: Anvils and spindles are hardened and precision ground with microlap finish on tips.
  • 0.256" diameter, 0.00003" flatness, and 0.00005" parallelism on 0 to 1" micrometer for accurate measurements.
  • Easy to Use: Quick, easy zero adjustment on the sleeve and positive locking nut on spindle.
  • Ratchet stop thimble applies constant measuring force for repeatability between users.
  • Satin Chrome Finish: On the thimble and sleeve to help reduce rust and glare, lapped spindle thread that provides smooth movement and extends product life.
  • Set Includes: Outside micrometers of 0 to 1 inch, 1 to 2 inches, 2 to 3 inches and 3 to 4 inches.
  • 1 inch, 2 inches, and 3 inches standard, a wrench, and a fitted case.
Check Stock

Fowler 52-095-007-0, Universal Measuring Set

  • Dial Caliper: This measurement tool set includes Fowler 52-008-007-1 dial caliper with 0.001" graduations.
  • Micrometer Gage: Fowler 52-229-201-0 vernier micrometer with 0.0001" graduations and 0-1" measuring range.
  • Flexible Rule: The set also contains a 6" flexible rule with 32nds, 64ths, 10ths, and 100ths graduations.
  • Easy Storage: This measurement kit comes in a shop-hardened case for storage.
Check Stock