Reviews Micro fiber Nozzles

Genuine E3D v6 Plated Copper Heater Block (V6-BLOCK-CARTRIDGE-COPPER)

  • Cleaning needle: 10 flexible stainless steel needles for gentle maintenance of your nozzles and difficult to reach places such as feed gears..
  • V5 V6 Nozzles: Material: brass, Thread type: M6, Output diameter: 0.4 mm.
  • Input filament diameter: 1.75 mm, Compatible: V5 and V6 extruder hotend Filament, supported: ABS / PLA / PETG / Carbon Fiber.
  • Spanners: Nozzle spanner make nozzle installation and removal easier. Suitable for nozzles with a diameter of 6mm, such as MK8 nozzles, E3D V5 V6 nozzles, etc. Heating block spanner only fit for V6 heat block. Allen wrench makes mounting and dismounting small screws easier..
  • Tweezers: 3D printing tweezers are suitable for maintenance nozzles and cleaning excess support material.
  • it is anti-static, non-magnetic precision tweezers..
  • Silicone socks: Will keep your heater block clean and free from burnt and blackened plastic.Helps to keep the hotend temperature extremely stable, particularly if you use high-airflow cooling around the nozzle to cool the print..
Check Stock

25PCS 3D Printer Nozzles, Premium MK8 Nozzle Ender 3 Nozzles 0.4 mm, 3D Printer Brass Nozzles for Makerbot Creality CR-10 Ender3 V2 Ender3 Pro with 5 Needles by Zojicif

  • 【High precision】the inner wall of the 3D printer nozzles is smooth and has no burrs, its viscosity coefficient is small, high precision&perfect aperture, so premium MK8 nozzle can prevent print head from leakage and allow for easy flow of the filament without clogging..
  • 【Premium Quality】Our 3D printer nozzle are made of high quality brass material, heavy duty and provide a long service life, easy to install and change. Our premium MK8 Ender 3 Nozzles input diameter 2.00mm, output diameter 0.4 mm, out thread M6, thread length 5mm..
  • 【Applicability and Compatibility】Our premium MK8 nozzles ender 3 nozzles fit for 3D Printers like Creality Ender 3/Ender 3 V2/Ender 3 Pro/Ender 3 Max/Ender 5 Series/CR 10 Series, compatible-with all 1.75mm PLA ABS 3D printers. Fit exactly like the original..
  • 【Good performance】Our precision 3d printer brass nozzles MK8 nozzle has impressive toughness and hardness, not only suitable for common 1.75 mm 3D printer filaments, but also can be applied for printing filaments of carbon fiber, fiberglass, etc..
Check Stock

SainSmart ePA12-CF Carbon Fiber Nylon Filament 1.75mm, 0.5kg (1.1lbs), Dimensional Accuracy +/- 0.05 mm, Black

  • ...suitable for functional prototypes, tools, fixtures, end-use parts, pump impellers, mechanical gears, precision and engineering components, widely used in robots, drones, and automotive and aviation industry..
  • [Tips for Printing]: As an abrasive material, the ePA12+CF Filament can wear out and clog stock 0.4mm brass nozzles rapidly, hardened steel nozzles with larger diameters (0.6mm or more) are highly recommended for printing this filament. For better finish and layer adhesion, we would also suggest drying it before printing and creating a constant ambient temperature with a filament dryer or an enclosure. Print Temp: 280°C - 300°C, Bed Temp: 45°C - 60°C, Fan Speed: 0%, Print Speed: 40-100mm/s..
Check Stock

Lily's Home Above Ground Sprinkler System. Pre-Assembled Garden Sprinklers for Small Areas. DIY Irrigation Plant Watering Kit

  • ..., after installing the watering kit , just rotate faucet , watering all your plants in one time. The best outdoor drip irrigation set for Halloween Day, Thanksgiving Day, Black Friday, Cyber Monday, New Year's Gift !.
  • TWO SPRINKLE SYSTEMS : Automatic irrigation kit provide nozzles and drrippers to meet watering needs, no matter irrigate one plant at the root zone or mist above the plants, just a micro irrigation sprinkler kit care your garden..
  • EASY INSTALLATION : Drip irrigation kits simple installation without digging or plumbing skills ,simply cutting the hose, connect the barbed fittings with nozzles or drrippers, an user manual to show how to install clearly ,just do it yourself ..
  • MULTIFUNCTION KIT : Drippers and Nozzles are also adjustable, controlling the water flow by rotate,the nozzles also provides a cool environment from the heat for outdoor areas.Great for agriculture, lawn, garden, patio, greenhouse, swimming pool misting fog cooling irrigation ..
  • GOOD QUALITY : Garden irrigation system made of ABS Plastic + Rubber material , ensure the item no odor and poison , tubin....
Check Stock

SainSmart 1.75mm Black ePA-CF Carbon Fiber Filled Nylon Filament 1KG (2.2lbs) Spool for 3D Printer

  • ...medical equipment, and complex costumes, etc. Optimal print temperatures of 260 - 280°C(500-536°F) with a build surface temperature of 80-90℃make it a great choice for professional and home 3D printers..
  • [Tips] Carbon Fiber is abrasive and in general, these fibers will rapidly accelerate the nozzle-wear of brass nozzles. It is highly recommended that you use nozzles made from Stainless steel or other hardened alloys. For better layer adhesion and strength, a constant ambient temperature is needed, we recommended you to print in a enclosure or with an enclosed printer to get the best result..
Check Stock

Griot's Garage 10260 Micro Fiber Detailing Mitt

  • Deep, plush nap micro fiber is safe and effective on any surface.
  • Lighter weight than most micro fiber wash mitts.
  • Foam lined micro fiber provides excellent comfort, protection and increased durability.
Check Stock

HOMEDEC Thermostatic Rain Waterfall Shower System with Body Spray Jets Ceiling Black Shower Faucet Set Complete with Valve Can Use All Function At Once

  • 【2-MODE LUXURY SHOWER HEAD SYSTEM】Unique 2-in-1 design makes a difference, large area rain mode, and comfort waterfall mode, with our 4-way thermostatic shower valve, you can use one or ALL FUNCTIONS AT THE SAME TIME..
  • 【THERMOSTATIC 4-WAY SHOWER VALVE】The hot water and cold water are mixed by the mixer to realize constant temperature adjustment and effectively avoid burns. Metal brass casting has a longer life than ordinary plastic..
  • 【LUXURY MULTI SHOWER HEAD SYSTEM】14.96 inches * 27.56 inches super large shower head, large enough shower space to enjoy the shower to the fullest. The complete shower faucet set is mostly cast in Stainless steel 304 and has a lot of weight. Rust and oxidation resistant..
  • 【6PCS SHOWER BODY JETS】Each jet has micro-porous nozzles for even water flow and easy cleaning. The angle is adjustable, you can adjust the direction of water flow up and down..
Check Stock

Creality 3D Hardened Steel MK8 Nozzle with High Temperature Resistance Upgraded Tungsten All Metal Nozzle Ends for Makerbot Ender 3 / Ender 3 S1, CR-10 Series, 0.2/0.3/0.4/0.5/0.6 mm (5pcs in One Set)

  • [Super Durable Tungsten Material] MK8 extruder nozzles are made by paramount hardened tungsten steel, with long life use time than the normal brass nozzle. The hardness is over HRC60 can reduce the abrasion to the inner and outer of the nozzle during long time printing，more heat-resistant than ordinary brass nozzle，MK nozzles is harder than brass nozzles，which makes it durable accurate and compatible with more filaments..
  • [High Temperature Resistance ] The max temp of this hardened tool steel nozzle could reach at 450c, suitable for 3D printing at high temperature, compatible material from PLA,ABS to carbon fiber, even PEEK..
  • [High Precision] these 3D printer nozzles keep stable temperature during printing let the filament out evenly, create more perfect printer item than normal metal nozzle. Also with higher print speed in same print precision.Not easy clog during printing, easy to clean. Made with centering CNC precision automatic lathe and one-time forming technology, make sure the input and output holes are concentric and the interior of nozzle is smooth without burrs..
  • [Applicability and Compatibility] Our Creality Ender-3 S1 Nozzles suit to almost all FDM printer,could install to MK8 heating block. Our tungsten nozzles fit for 3D Printer Mak....
Check Stock

Woolrich Twin Falls Quilt Set, King/Cal King, Brown/Blue

  • Oversized Plaid prints Bear motif Solid reverse Set includes 1 decorative pillow.
  • Quilt: 100% polyester printed micro fiber on face with solid micro fiber on reverse, Fillling: 250gram 90% cotton 10% others. Pillow cover: 100% polyester micro fiber with animal applique on face, polyfill..
  • 1 Quilt:110″W x 96″L 2 King Shams:20″W x 36″L (2) 1 Decorative Pillow:18″W x 18″L.
Check Stock

Creality 10 Packs 3D Printer Hardened Steel MK8 Nozzles, Upgraded Tungsten All Metal Extruder Nozzles 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm for Creality Ender 3 Ender 3 V2 Ender 3 pro CR-10

  • [Super Durable Tungsten] - MK8 extruder nozzles are made by paramount hardened tungsten steel, with longer lasting time than the normal brass nozzle. The hardness is beyond HRC60, can reduce the abrasion to the inner and outer of the nozzle during long time printing, more heat-resistant and more durable than ordinary brass nozzle..
  • [Super High Temperature Resistance] - The max temp of this hardened tool steel nozzle could reach at 450c, suitable for 3D printing at high temperature, compatible with material such as PLA, ABS to carbon fiber, even PEEK..
  • [High Precision More Than Your Imagination] - Keep stable temperature during printing, let the filament out evenly, create more perfect printer item than normal metal nozzle. Also with higher print speed in same print precision. Avoid clog during printing, easy to clean. Made with centering CNC precision automatic lathe and with one-time forming technology, make sure the input and output holes are concentric and the interior of nozzle is smooth without burrs..
  • [Applicability & Compatibility] - Our Creality Nozzles are compatible with almost all FDM printer, also fits for MK8 heating block. Our tungsten nozzles are also designed for 3D Printer Makerbot Creality Ender 3 series and CR-10 series 3D printer, MK....
Check Stock