Reviews Metric Titanium Bolts

Vbestlife Titanium Bolts, M6x18mm 4Pcs Mountain Bicycle Bike Disc Brake Clamp Bolt Fixed Screw with Gasket

  • [ Professional Design ] Titanium bolts are usually used for bike bicycle disc brake fixing, crank locking and headset stem fixing..
  • [ Three Color ] The surface is finished with high glossiness, cool and goodlooking. Three colors for choosing, fashionable and cool. Valve caps are mainly applied in most bicycle..
  • [ Easy Installation ] High precision screw thread, Titanium Bolts are easy to install using corresponding hex wrench(not included)..
  • [ Safe and Reliable ] Wonderful fixing screws for your mountain bikes, road bikes, or other kinds of bicycles. Comes with gasket..
  • [ Material ] M6 titanium bolt is made of premium titanium alloy with exquisite workmanship, high performance of prevention, antioxidization, excellent durability..
  • [ Safe and Reliable ] Wonderful fixing screws for your mountain bikes, road bikes, or other....
Check Stock

Neiko 02460A 3/4\ Drive Deep Impact Socket Set, 8 Piece Jumbo Assortment | Metric Sizes (26 to 38 mm) | Chrome Vanadium Steel

  • HEAVY DUTY BUILD: The construction of each 3/4” socket in this 8 piece set consists of extremely strong Chrome Vanadium (Cr-V) steel that will output greater torque, but also has a corrosion resistant black phosphate finish to give your sets longevity and longer lifespan..
  • LARGE SOCKET: This ¾” impact socket set is designed for use with impact wrenches. A set of 8 high-torque, 6-point Metric sockets with ¾ inch drive, each jumbo socket is used to remove tough nuts and bolts on larger vehicles..
  • SPECIAL DEEP DESIGN: Each socket has a unique design that grips the flat sides of fasteners rather than the corners to prevent stripping and rounding off of bolts. With a high torque impact gun, each Metric socket will torque the most stubborn fasteners..
  • HIGH VISIBILITY MARKINGS: The easy-to-see high-contrast laser-etched Metric size markings allow easy reading in low light settings and promote efficiency on the job..
  • INCLUDES COMMON METRIC SIZES: Includes eight common Metric socket sizes (26, 27, 29, 30, 32, 35, 36, 38 mm) with blow-mold storage case included..
Check Stock

11 Degree Angled Leg Mounting Plates, Furniture Leg Attachment Plates Industrial Strength T-Plate M8 Sofa Legs with Hanger Bolts,Screws,Set of 4

  • 11 DEGREE ANGLED.Strengthen/ Repair Furniture- No more wobbly legs ! This furniture leg attachment plates are designed for attaching legs to new or damaged sofas, couches, seats, ottomans and more. NOTE: THEY ARE 11 DEGREE ANGLED.Your chair woods need NOT to cut in 11 degree in order to fit the mounting plates..
  • Industrial Standard – Each T-Plate is 2" by 2" (L x W) and 1/4" deep (approx). Plates have 5/16" threaded (metric M8) attachment holes for hanger bolts ,have 4 unthreaded holes(5mm)..
  • Easy Installation within Minutes - No need to purchase hanger bolts separately . You have EVERYTHING ready to install furniture legs feet!. Package includes all necessary parts- 4 sets of angled sofa leg mounting plates.
  • 16 pcs of screw adapters for 5mm unthreaded holes.(Metric M8 is Ikea standard)..
  • Convert to U.S. Standard Legs - If your sofa legs are pre-drilled for M10/M8 hanger bolts, these plates allow you to use metric 8mm and convert to U.S. Standard Legs by simply attach these mounting brackets over the hole in the furniture frame..
  • 4 sets pack.You have everything ready for the setup.Add them to your shopping cart and save more money!.
Check Stock

M12-1.75 x 30mm Hex Head Bolts Hexagon Screws, Class 12.9 Alloy Steel Black Oxide Finish, Full Thread, 10 PCS

  • WIDE APPLICATION : The hex bolts can be used for different kinds of furniture such as cribs, cupboards, wardrobes, bunk beds, etc. It also good for office appliance, communication equipment, ship assembly and other machinery industry..
Check Stock

14 Degree Angled Leg Mounting Plates Furniture Table Leg Attachment Plates Brackets T-Plate M8 Sofa Legs with Hanger Bolts,Converters, Screws,Full Set of 4

  • ...plates are designed for attaching legs to new or damaged sofas, couches, seats, ottomans and more. NOTE: THEY ARE 14 DEGREE ANGLED.Your chair woods need NOT to cut in 14 degree in order to fit the mounting plates..
  • Specification – Each T-Plate is 1.89" by 1.89" (L x W). Thickness 1.2mm. Plates have 5/16" threaded (metric 8mm/ M8) attachment holes for hanger bolts ,have 4 unthreaded holes(4.5mm)..
  • Easy Installation within Minutes - No need to purchase hanger bolts separately . You have EVERYTHING ready to install furniture legs feet!. Package includes all necessary parts- 4 sets of angled sofa leg mounting plates.
  • 16 pcs of screw adapters for 5mm unthreaded holes.(Metric M8 is Ikea standard)..
  • Convert to U.S. Standard Legs - If your sofa legs are pre-drilled for M10/M8 hanger bolts, these plates allow you to use metric 8mm and convert to U.S. Standard Legs by simply attach these mounting brackets over the hole in the furniture frame..
  • Application- Fit most sofa chair /couches/seats/ottomans/bench/ dresser/ end table and ottoman in market. Full 4 set pack.You have everything ready for the setup.Add them to your shopping cart and save more money!.
Check Stock

53 Piece Rethreading Kit 19 Taps 32 Dies and 2 Thread Files Made in USA

  • Set Contains: 19 taps, 32 dies, of NC, NF and metric sizes and 2 thread files. Please see detailed set content in Product Description section below..
  • Ideal for restoring the stripped threads on old, rusty nuts and bolts.
  • Hex shape makes taps and dies easy to turn with any socket or wrench.
  • Can be used on national coarse, national fine and metric nuts and bolts.
  • Made in USA and Backed by Limited Lifetime Warranty against manufacturing defects.
Check Stock

4 Sets Furniture Legs Mounting Plates with Hanger Bolts Screws Great for Furniture Leg,Chair, Sofa,Cabinet,Couche, Set of 4

  • Pack list: 4 Pcs M8 hanger bolts, 12 Pcs screw. Note: Our products belong to the metric M8 hanger bolts. If you find that you can’t screw the hanger bolts, the accessories may not match (the imperial system does not match the metric system). You can check it carefully before purchasing. If there is a purchase error, please contact us in time. You can get a refund for free..
  • Widdly use:The furniture leg attachment plates are designed for attaching legs to new or damaged sofas, couches, seats, ottomans and more..
  • Easy to Install: Sofa leg mounting plate sets protect the furniture legs effectively, make your furniture more durable..
  • Furniture Leg Mounting Plates can be applied to repair the furniture when the sofa are damaged and missed the threaded nut, or the T-nuts have wiggled loose and won't stay in place..
  • Complete accessories: No need to purchase hanger bolts separately. You can follow the plan to install immediately,When you install product and found any questions,please contact us in time,Our after-saler team will support you immediately..
Check Stock

Stainlesstown Nut Bolt Thread Gauge (Red)

  • Measures diameter, thread pitch & length of nuts, bolts & screws.
  • Measures fractional bolts from size #4 to 1" up to 7" long.
  • Measures metric bolts & screws from size 3mm to 22mm.
  • Made of very durable 1/4" thick hard plastic.
  • 1/4" thick x 8-3/4" Long x 3-3/8 Wide Color: Red.
Check Stock

Stainlesstown Nut Bolt Thread Gauge (Blue)

  • Measures diameter, thread pitch & length of nuts, bolts & screws.
  • Measures fractional bolts from size #4 to 1" up to 7" long.
  • Measures metric bolts & screws from size 3mm to 22mm.
  • Made of very durable 1/4" thick hard plastic.
Check Stock

DURATECH Universal Wrench Set, Adjustable Wrench Set, SAE & Metric, 8-inch&10-inch, 44 sizes in 2 Piece, Drop Forged, ANSI standard

  • Drop forged, heat treated, double thread, mirror polish, and electroplating. Exceeds ANSI specifications..
  • Different sizes meet your different needs. The 8-inch universal wrench fits both standard 3/16 '' to 5/8 '' and metric 5mm to 16mm nuts and bolts.
  • 10-inch universal wrench fits both standard 11/16 '' to 1-1/16 '' and metric 17mm to 27mm nuts and bolts, adjust the size by moving the middle push block..
  • The working torque reaches 1.2 times of the American standard of the double box end wrench, and the destruction torque reaches 1.4 times of the American standard of the double box end wrench..
  • Specialized wrench design allows work on multiple types of fasteners including 6-point, 12-point, square, E-Torx, triangle, and most rounded out fasteners..
  • This wrench can do both American standard and Metric. With this total wrench you can do so many thing without the need of changing wrenches of different sizes since this multi facet..
  • Free replacement insures your DURATECH Wrenches purchase against manufacturer defects..
Check Stock