Reviews Metric And Sae Flaring Tool

HVAC Flaring Tool Kit for 1/4 - 3/4 Copper Pipe Flare Tool 45°Eccentric Single Tubing Flaring Tool with Pipe Cutter & Deburring Tool for Copper Aluminum Pipes Refrigeration Air Conditioner Repair

  • The accuracy eccentric cone flaring tool produces 45 Degree flares in soft copper, brass, aluminum or stainless steel pipes. Widely used in HVAC, air conditioners, air heaters, refrigerators maintenance, etc..
  • Our HVAC Flaring Tool Kit comes with 2 types of flaring clamps applicable pipe O.D.Inch: 1/4", 5/16", 3/8", 1/2", 5/8", 3/4" Metric: 6mm, 9mm, 10mm 12mm, 16mm, 19mm)..
  • The eccentric flaring cone provides for easy clamping and removal of tubing, Large feed screw handle for smooth turning with little effort (NOTE: It will only do single flare - not double flare!).
  • The flare tool is designed with a clutch in the rotating handle, which will automatically disconnect when the flaring is completed..
  • Package includes 1x Flaring Tool, 2x Clamp(inch & metric type), 1x Deburring Tool, 1x Tube Cutter for O.D. 6-50mm tubes, 1x Manual Book, 1x Suitcase..
Check Stock

4LIFETIMELINES Economy Brake Line Flare Kit for Single, Double (SAE) Flares & Bubble (ISO) Flares - 2 Flaring Bars, 9 Flaring Dies, Tubing Reamer, & Storage Case

  • Creates single, double inverted (SAE) flares & bubble (ISO) flares up to 0.040″ wall thickness.
  • Designed to perform flares on thin wall steel, aluminum, copper, and nickel-copper tubing.
  • Includes flaring dies for sizes: 3/16″, 1/4″, 5/16″, 3/8″, 1/2″, 4.75mm, 6mm, 8mm, 10mm.
  • Self-centering yoke has corresponding slots to hold bar assembly tightly in place during flaring.
  • Contents Include: (1) SAE Forged Alloy Steel Flare Bar, (1) Metric Forged Alloy Steel Flare Bar, (1) Self Centering Premium Yoke, (10) Flare Die Heads, (1) Tubing Reamer 3mm-12mm, (1) Rigid Plastic Storage & Carrying Case.
Check Stock

Titan 51535 3/16-Inch Double Flaring Tool

  • Set Contents: (1) 3/16-Inch Double Flaring Tool with Removable Handle, (1) Positioning Bolt, (1) Double Ended OP1/OP2 Punch, (1) Container of Die Lubricant.
  • Creates a perfect inverted 45-Degree SAE double flare with 3/16-inch steel and nickel-copper tubing. Not recommended for use on stainless steel tubing..
  • Can be used on the vehicle! Compact design can be used in tight under-car spaces allowing user to repair brake lines in place on the vehicle..
  • Handle can be removed if you prefer to use in a bench vise..
  • SAE Double Flare is an inverted 45-Degree flare typically used in automotive brake line applications. 3/16-Inch brake lines are on almost all cars and trucks making this flaring tool usable with most vehicles..
Check Stock

Neiko 20657A ISO/Bubble Flaring Tool Kit

  • Designed for metric soft steel brake lines where an “ISO” or bubble style flare is required, set included: Yoke Assembly, Flaring Bar, Gauge/Wrench and 4 adapters for 4.75mm, 6mm, 8mm, and 10mm Tubing.
  • Lever-lock flaring bar makes tool kit easy to use for professional and DIY mechanics.
  • Suitable for foreign (European, Japanese) and domestic vehicles (cars, SUVs, light trucks).
  • Yoke assembly, Flaring bar, Gauge/wrench, 10mm tubing, 4 adapters for 4.75mm, 6mm, 8mm.
  • Includes blow-molded carrying case for organization and storage.
Check Stock

QISF Multi-Purpose 2 Pack Screw Thread Pitch Gauge Tool, Pitch Cutting Gauge Caliper Gages Measuring Tool, 51 Pcs America SAE Type + 58 Pcs Metric & America SAE Type & British Whitworth

  • 【Function】-- 2 In 1 set Screw Thread Pitch Gauge Tool, Pitch Cutting Gauge Caliper Gages Measuring Tool.
  • 51Pcs Blade America SAE Type and 58Pcs Blade Metric & America SAE Type & British Whitworth.
  • 【Wide application】-- Accurately measures internal and external screw threads with thread blades of varied size.
  • Use to provide the correct size drill bit, or to size fastener to determine what bit should to use. Used for checking tool angle while cutting threads in metal turning lathes, accurately measures internal and external screw threads with thread blades of varied size.
  • 【Material】--Stainless steel and chrome finish, it combines high strength, good resilience, elegant appearance. Not easy to rust and long lasting durability.
  • 【Size】-- 51 Pcs America SAE Type Measuring range: 4-84.
  • / 58 Pcs Metric & America SAE Type & British Whitworth Metric:0.25-6.0 Imperial:4G-62G US: 8, 10, 11, 14, 19, 28.
  • 【Package】-- 1 x 58Pcs Blade Metric & America SAE Type & British Whitworth.
Check Stock

OTC 6502 Master Brake Flaring Tool Kit

  • Covers single double and bubble type flares.
  • Single flare standard lines 3/16 inch – 5/8 inch and single flare metric lines 4 millimeters – 14 millimeters.
  • Double flare standard lines 3/16 inch – 1/2 inch and double flare metric lines 4 millimeters – 10 millimeters.
  • Bubble flare standard lines 3/16 inch – 1/2 inch and bubble flare metric lines 4.75 millimeters – 10 millimeters.
  • Kit contains flaring bar, arbor press, adapters, tube cutter, and debarring tool – all in a hard case.
Check Stock

OEMTOOLS 25026 High-Energy Ignition Spark Plug Gap Gauge, Gap Measurement Tool, 6 Wire Sizes, Includes Electrode Adjuster, Metric and SAE

  • Wide Range: Our gap gauge ranges from 0.040 inch to 0.080 inch.
  • This broad scope ensures you get the correct calculation.
  • Easy To Read: Both the sizes and units of measurement are clearly stamped so that you never have to wonder what the tool is reading.
  • Adjuster: Spark plug gap gauge features 6 wire sizes along the outside of the gauge.
  • This handy gap measuring tool also includes an electrode adjuster.
  • Compact Design: Spark plug gap tool is less than 7 inches long, helping it get into tight or obstructed spaces.
  • Measures Metric and SAE: This spark plugs gap tool displays both SAE and metric sizes.
  • SAE sizes are stamped on the front and metric sizes are stamped on the back.
Check Stock

1 TU58 Thread Measuring Gauge, Vertical Bolt and Nut Gauge / Thread Checker (Inch & Metric)

  • 【Durable Quality】-- Made of quality stainless steel, it combines high strength, good resilience, elegant appearance. Not easy to rust and long lasting durability.
  • 【Wide application】-- Accurately measures internal and external screw threads with thread blades of varied size.
  • Use to provide the correct size drill bit, or to size fastener to determine what bit should to use. Used for checking tool angle while cutting threads in metal turning lathes, accurately measures internal and external screw threads with thread blades of varied size.
  • 【Easy To Use】-- Designed with a hole on each end, from where you press the tooth gauge, you can easily rotate the thread blades.The toothed edges are sharply defined and the numbers are stamped and easy to read.
  • 【Size】-- 51 Pcs America SAE Type Measuring range: 4-84.
  • 58 Pcs Metric & America SAE Type & British Whitworth Metric:0.25-6.0 Imperial:4G-62G US: 8, 10, 11, 14, 19, 28.
  • 【Package Include】-- 2 In 1 set Screw Thread Pitch Gauge Tool, Pitch Cutting Gauge Caliper Gages Measuring Tool.
  • 51Pcs Blade America SAE Type and 58Pcs Blade Metric & America SAE Type & British Whitworth.
Check Stock

Performance Tool W1099 22-Piece SAE and Combination Metric Wrench Set with Organizer Rack

  • SAE & METRIC WRENCH SET: Offers all SAE & metric wrench applications and measurements.
  • LONG-LASTING CONSTRUCTION: Our wrenches are made of high grade, heat-treated, mirror polished chrome vanadium steel for strength and durability & corrosion resistant.
  • ORGANIZED WRENCH SET: Handy carrying box can fit into most tool drawers.
  • Minimal, easy-to-carry packaging allows for all wrenches to stay organized with quick access without a bulky case.
  • MOST NEEDED SIZES: SAE - 1/4, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16, 5/8. 11/16 & 3/4".
  • Stubby SAE - 1/4, 3/8, 7/16, 1/2, 9/16 & 5/8".
  • Metric - 6, 7, 8, 9, 10, 12, 13, 15, 17 & 18 mm.
  • Stubby Metric - 10, 11, 12, 13, 14 & 15 mm.
Check Stock

DURATECH Ratcheting Combination Wrench Set, SAE & Metric, 22-piece, 1/4″ to 3/4″ & 6-18mm, CR-V Steel, with Carrying Bag

  • Wrenches are made from durable chrome vanadium steel, additional mirror finish improves the corrosion resistance of the surface and effectively prolong the service life. DURATECH 22-Piece ratcheting combination wrench set makes emergency repairs a breeze..
  • 72 teeth perfect precision with slim profile. The 12-Point box end delivers reliable torque to tighten or loosen any bolt without rounding. Top-quality hand tools for every repair project..
  • 22-piece SAE&Metric Ratcheting Combination Wrench Set that meets ANSI standard includes 11METRIC+11SAE unbreakable wrench: Metric 6mm, 8mm, 9mm, 10mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm and SAE 1/4’’, 9/32’’, 5/16’’, 11/32’’, 3/8’’, 7/16’’, 1/2’’, 9/16’’, 5/8’’, 11/16’’, 3/4’’. Standard and metric measurements ensure that you have the right tool to tackle any screw or bolt..
  • Tool roll for convenient storage and taking. The tool roll case has each wrench size printed which makes organizing easy..
  • This comprehensive collection of open-ended and ratchet wrenches is a must-have for your roadside emergency kit. They roll up neatly in an organizer bag for storage in your car trunk or mechanics gear..
Check Stock