Reviews Metalworking Fixtures

SHARS 1/2\ X 3/8''-16 Pivot Hold Down CLAMP 202-4838 P]

  • Overall Dimension: 4-1/2 in L x 1-3/4 in W x 4 in H *Rough Estimation*.
  • Shipping Weight: 4 Pounds *Rough Estimation*.
  • Instant Height Adjustment Without Blocks Or Shims.
  • The Body Of The Clamp Is Formed By Forge Steel.
  • Suitable For Many Woodworking And Metalworking Applications For Workpiece Holding, Positioning And Fixing. It Is Also Ideal For Clamping Jigs And Fixtures.
  • Easy To Install And Use, Ensuring Good Performance And Helping To Increase Efficiency.
Check Stock

Impact 1853 GateMate Plus Holder, 2-7/8\ Length x 3\ Width x 1-3/4\ Height, Black (Case of 6)

  • Overall Dimension: 5 in L x 1-3/4 in W x 4 in H *Rough Estimation*.
  • Shipping Weight: 6 Pounds *Rough Estimation*.
  • Instant Height Adjustment Without Blocks Or Shims.
  • The Body Of The Clamp Is Formed By Forge Steel.
  • Suitable For Many Woodworking And Metalworking Applications For Workpiece Holding, Positioning And Fixing. It Is Also Ideal For Clamping Jigs And Fixtures.
  • Easy To Install And Use, Ensuring Good Performance And Helping To Increase Efficiency.
Check Stock

Magswitch MagSquare 600 Magnetic Welding Square Base Clamp Holder for Welding Kit, Tools, Supplies and Accessories, Magnet Switch with On/Off Capabilities, 600 lb Holding Force

  • ...l ever! Align and secure flat or round tubing pieces of steel to fabricate multi-angle holds.
  • WELDERS HELPER: Our welding & heavy fabrication tools are engineered to drive productivity for professional welders, fabricators and pipefitters. Large sheet leveling, sheet de-stacking, fixturing, weld grounding, mounting, metalworking, notching, workholding, positioning, alignment, spatter, fitting and many more applications are performed significantly faster.
  • ON/OFF SWITCH: The true ON and OFF capabilities create a platform that is more efficient, faster, safer and easier to use! Use it with tig, spot, stick torch, fiber, arc welders. Magnetic grip turns all the way off for quick release. No need to pry or fight magnet for precise positioning.
  • ENDLESS BENEFITS: Multiplane magnetic grip on 5 sides, pre-tapped holes for mounting. No electrical power source needed. Pull corners, secure steel sheets for cutting, use as a guide or make your own fixtures. A must for any welding table or cart.
  • EASY TO CLEAN: Powerful Magnet stays clean unlike traditional magnetic squares that hold on to metal chips even when off, with our heavy duty magnet you won’t cut your fingers cleaning away steel shavings and debris. When turned off debris falls off.
Check Stock

Starrett Magnetic Base Holder 660 with Triple Jointed Arm, Use With Any Dial Indicator with  3/8\ Stem or Standard Dovetail Mount, Horizonal and Vertical Grips, On/Off Switch, Central Locking KNob

  • DIAL INDICATOR HOLDER: Magnetic bases are magnetic fixtures commonly used in metalworking to hold dial indicators, and are also used in other fields, such as optics..
  • WIDE COMPATIBILITY: Use this magnet base as a holder with any dial indicator that has a 3/8" stem or standard dovetail mount.
  • HORIZONTAL & VERTICAL POSITIONS: Articulating arm with powerful central locking kNob, provides full 360 degree horizontal positioning and over 180 degree vertical positioning..
  • EASY OPERATION: Has 3 adjustable pivots controlled by a single kNob for fast, easy indicator positioning, and a sensitive fine adjustment thumb screw..
  • SMALL BUT POWERFUL: Offers 70 lbs. (320 N) holding force, a max horizontal reach of 4.750" and max vertical reach of 7.500". Base dimensions are 1-3/16" x 1-9/16" x 1-3/8"..
Check Stock

POWERTEC 110680 4 x 36 Inch Sanding Belts | 80 Grit Aluminum Oxide Sanding Belt | Premium Sandpaper – 10 Pack

  • Kit includes 1 each: P1000, P1200, P1500, and P5000 grit sanding belts (4 total).
  • Industrial quality metalworking material designed specifically for knife making | Closed coat | Heavy duty polyester cloth backing.
  • Precision engineered bi-directional tape joint | Anti-clogging stearate to reduce heat and buildup | Resin over resin bonding for long belt life.
  • Wet or dry applications | Ultra fine grits are ideal for sharpening, polishing, or ultra fine finishing of any surface | Great for general metalworking as well.
  • Factory direct | Hand built in usa by Red Label Abrasives | Money back guarantee.
Check Stock

Red Label Abrasives 2 X 42 Inch Knife Sharpening Sanding Belts – Ultra Fine Grits – 4 Pack Assortment

  • Kit includes 1 each: P1000, P1200, P1500, and P5000 grit sanding belts (4 total).
  • Industrial quality metalworking material designed specifically for knife making | Closed coat | Heavy duty polyester cloth backing.
  • Precision engineered bi-directional tape joint | Anti-clogging stearate to reduce heat and buildup | Resin over resin bonding for long belt life.
  • Wet or dry applications | Ultra fine grits are ideal for sharpening, polishing, or ultra fine finishing of any surface | Great for general metalworking as well.
  • Factory direct | Hand built in usa by Red Label Abrasives | Money back guarantee.
Check Stock

Red Label Abrasives 2 X 42 Inch Knife Sharpening Sanding Belts - Premium Ceramic - Coarse Grits - 6 Pack Assortment

  • Kit includes 1 each: P36, P40, P60, P80, P100, and P120 grit premium ceramic sanding belts (6 total).
  • Industrial quality metalworking material designed specifically for knife making | Closed coat | Heavy duty y-weight polyester cloth backing.
  • Precision engineered bi-directional tape joint | Anti-clogging stearate to reduce heat and buildup | Resin over resin bonding for long belt life.
  • Wet or dry applications | Unique properties of ceramic grain deliver outlast other types (zirconia, silicon carbide, aluminum oxide, etc.) | Great for general metalworking as well.
  • Factory direct | Hand built in usa by Red Label Abrasives | Money back guarantee.
Check Stock

6-Inch Cross-Slide Drill Press Vise X-Y Compound Vise 2 Way Heavy Duty Cross Slide Vise Clamp Machine Metal Milling

  • Material - This X-Y compound vise made of heavy duty cast iron construction, Powerful serrated steel jaws.
  • Size - 6" wide machinist jaws ,Maximum jaws opening: 5.9" , Jaw depth 2.08 inch.
  • Vice Travel X: 5.5inch Vice Travel Y: 7.48inch.cold rolled steel....
  • Usage - uyoyous cross slide vise have swivel crank handles for adjusting vise front to back and left to right, bolt down slots for securing..
  • Function - Hinged vise crank handles drops out of the way, designed for woodworking and metalworking..
  • Wide Application - our heavy duty cross slide vise designed for woodworking and metalworking, widely used in milling machine, drill press and....
Check Stock

Mixiflor 40Pcs Cone Shape Abrasive Sandpaper 1/4 Inch Shank Flap Wheels 80/120/180/240/320 Grits Aluminum Oxide for Removing Rust Deburring Polishin

  • MOST COMMON SHANK SIZE: The 1/4 shank makes these abrasive wheels suitable to be used as sanding wheels for electric drills, cordless drills, die....
  • METALWORKING APPLICATIONS: The mounted flap sanding wheels are commonly used in metalworking as a grinding or deburring wheel to clean up welds and....
  • WOODWORKING APPLICATIONS: Often used for flap sander wheels in woodworking for the stripping of old layers of paint when during resurfacing projects....
  • PREMIUM MATERIALS: High quality aluminum oxide coated abrasive cloth provides a solid and durable grinding power combined with high efficiency and....
  • YOU WILL GET: 6*15mm Cone Shape Abrasive Sandpapert - 5 Different Sanding sizes ‒ 8 pcs of each 80/120/180 /240/ 320 grits.
Check Stock

BEAMNOVA Universal Metal Bender Set High Precision Benchtop Manual Rebar Scroll Wire Bending Machine for Copper Tube Iron Aluminum Steel Brass

  • MULTIPLE PURPOSE - BEAMNOVA universal metal bender is a multiple functional metal bending machine, which can be used to produce grids, doors, gates, balcony railing, patio furniture as well as wrought iron lamps..
  • BENDING DIFFERENT KINDS OF MATERIALS. - BEAMNOVA manual scroll bender is designed to cut different kinds of metal material, such as steel, brass, copper, aluminum, etc..
  • IDEAL FOR METALWORKING & REPAIR SHOPS - BEAMNOVA rebar bender is heavy-duty, but at the same time portable and easy to use, which makes it an ideal tool for repairs shop and metalworking shops..
  • GREAT BENDING CAPACITY - In terms of flat steel, BEAMNOVA metal bending machine can perform at 1.18” x 0.394” (30x10 mm).
  • as to round steel and square steel, it can bend 0.394”..
  • DURABLE DESIGN WITH EASY OPERATION - BEAMNOVA universal metal bender is assembled with heavy materials that can last for many year’s use. You can mount it onto a workbench or floor, increasing the flexibility of metal bending process..
Check Stock