Reviews Metal Stock

Polishing Lapping Paste, ZFE 12Pcs 5 Gram Diamond Lapping Paste Polishing Compound Syringes 0.5 to 40 Micron for Final Polishing Metal and Jewelry

• ▲All of them are oil based with diamond powder, easy for use and avoid contamination. Best use with the wool polishers for polishing..
• ▲Suitable for use on jewellery & gemstone, steel & hard metal, aluminium & zinc, all metallurgical purpose..
• ▲Oil based, easy for use and avoid contamination. Best use with the wool polishers for polishing. Suitable for use on jewelry & gemstone, steel & hard metal,aluminium & zinc, all metallurgical purpose..
• ▲0.5 Micron - Final Polish,1.0 Micron - Mirror finish,1.5 Micron - Mirror finish,2.5 Micron - Mirror finish,3.5 Micron - Fine Polish,5.0 Micron - Fine Polish,7.0 Micron - Pre Polish, fine lapping,10 Micron - Lapping metals,14 Micron - Stock Removal or lapping metals,20 Micron - Stock Removal or lapping metals,28 Micron - Medium fast lapping,40 Micron - Fast lapping or stock removal carbide.
• ▲Use it on jewelry & gemstone, steel & hard metal, aluminium & zinc, all metallurgical purposes. Its oil based and easy to use..

Bonbo 5PCS Blacksmith Anvil Hardy Tool Set 1 Inch Hot Cut Tool, Creasing Stake Tool, Bottom Fuller, Turning Bending Scrolling Fork, Bending Forge Scrolling Welding Jig

• Hot Cut Tool: Used in the anvil or clamped in a vise to cut hot metal. To place orange/red hot steel over edge and strike with hammer. Cuts through hot steel pretty quick. Cut most of the way through, then break the piece off to prevent flying hot metal..
• Creasing Tool Stake: Fits in a 1 inch Hardy hole in an anvil, or can be used in a Vice. Two piece of bar stock weld it together on a stand. This is used for doing creases in metal. You can put the metal on the tool and use a chisel to drop the metal down into the slot. Perfect for while blacksmiths doing repetitive work keeping consistent, like knife making, leaf, armor, etc..
• Bottom Fuller Tool: Used in the anvil or clamped in a vise to form metal. Use a hammer to work from the top, while the hardy tool works from the bottom. This gives you different anvil surfaces and edges to work with. Square shanks fit the square hole in the anvil and prevent rotation..
• Turning Bending Scrolling Fork: Used to bend fork in an anvil or in a vice. Used to bend heated steel, quickly forming the curved shape you want. Perfect for making "S" hooks, bending medium stock and most scroll work. This tool allows you to get leverage for bending metal by hand, with a hammer, or with a bending wrench..

2 Pieces 1/2' X 4' Aluminum 6061 T6511 Solid Flat BAR 4' Long +.07'/-0 Extruded Mill Stock Saw Cut New

• ...ish. Aluminum bar stock is an nice material that will not rust and will last for years..
• SMOOTH & FLAT - The package contains 3 aluminum flat mill bars measuring 1 x 2 x 8 inches (25mm x 50mm x 200mm). These bars have smooth surface and neatly cut edges without burrs. It will not scratch your hands. Perfect for your metal working project..
• EASY TO MACHINE - Aluminum flat bar stock can be cut by lathes, CNC router systems, hack saw and milling machines. It is easy to machine or weld for milling or lathe work in a variety of applications and industries. And it can be heat treated as well..
• VERSATILITY - The 1x2 inches aluminum bars do drill and tap easily. You can use it as part of a wire forming jig in a press or heat sink. 6061 aluminum bar stock is widely used in building projects, metal working, architectural applications, and more..
• AFTER-SALES SERVICE - We actively answer your questions about our products. The goal is to make you happy with your purchase. If you are not 100% satisfied with aluminum tooling flat bar mill stock, just let us know. We'll get back to you with a satisfactory solution as soon as possible..

1/8 x 2 C110 COPPER BAR 12 long Solid Flat Mill Bus Bar Stock H02

Evike A&K Metal M16 SPR MOD-2 Airsoft AEG Sniper Rifle

• ◙ NOT a part or component. NOT for real weapons. Batteries, optics, and etc NOT included unless stated clearly. Please check the bulletpoints AND description carefully (Click on Show More if available). Blaze orange muzzle tips are preinstalled. Assembly may be required. ◙.
• Full SPR Enhancements Installed: SPR-front end, flip up front & rear sight, metal body, SPR-type grip and full stock.
• Adjustable flip-up front and rear sight system.
• 20mm picatinny rails – weaver based scope mount / rings ready.
• Free float rail Metal RIS for additional tactical attachments.

Makita 5 Pack - 4.5" Grinding Wheel For Grinders - Aggressive Grinding For Metal - 4-1/2 x 1/4 x 7/8-Inch

• ✅ 5 MAKITA Premium 4-1/2” Depressed Grinding Wheels for Metal | 4-1/2-Inch x 1/4-Inch x 7/8-Inch | Optimized for Makita 4-1/2” Angle Grinders and compatible with All 4-1/2” Angle Grinders with 5/8” arbor.
• ✅ GRIND 2-3X MORE than lower quality & cost wheels due to this wheel’s carefully selected Grain Grit, Hard Bond Matrix & Wheel Thickness that provide balanced Grind Life, Stock Removal Rate, Precision, Power Demands & Heat Buildup, allowing you to grind longer, consistently precise with maximal wheel integrity, moderate power demands and relatively low heat buildup.
• ✅ EASILY & SMOOTHLY GRIND all steel and metal including welds, carbon steel, structural steel, iron, steel pipes and alloy steel over an extra-long life span due to Makita’s High-performance Brown fused Aluminum Grain and hard bond matrix | Synthetic Resinoid Bond is ideal for fast stock removal, high operating speeds and aggressive grinding action used by professional metal fabrication, auto shops, maintenance repair, construction & general industrial applications.
• ✅ AVOID Premature Disintegration, Wheel Shatter, & Injury with lower priced wheels by relying on Makita’s proprietary strong bond matrix that binds Premium White Aluminum Ox....

OAREA Hunting Rifle Rubber Recoil Pad Slip-On Butt Stock Shotgun Shooting Extension Shotgun Gun Butt Protector

• Can be adjusted to raise or lower stock..
• Transform your stock and fine tune your shooting position with this clever accessory..
• Maximum dimensions of this butt plate are 13cm x 4.7cm and it is designed to be filed down to fit your own stock butt..
• Adjusts on one screw - metal so can be filed easily to match the stock of your rifle/air rifle or shotgun..

Fire Force Item 8379 Heckler Butt Stock Sling Attaching Kit Made in USA (Olive Green)

• Allows you to attach any sling hook on your HK91 Butt Stock. BUT STOCK IS NOT INCLUDED , IT IS JUST A PROP !!.
• Made with all Military spec Metal Hardware.
• Attaches to HK91 / HK93 / HK53 Butt Stock and alike.

Metal Magery Brass Flat Bar Stock Knife Making Brass Bar Stock 3/8 x 1 x 6

• This Metal Magery Brass Flat Bar Stock is the perfect size for your Knife Making and other crafting needs. Metal Magery Brass Bar Stock has a tensile strength range of 15-47 KSI, conforming to ASTM B36..
• Great Workability: 360 Brass Flat is ideally suited for applications where strength, good corrosion resistance, electrical conductivity, and non-sparking characteristics are important. Used widely for decorative purposes because of its smooth, shiny gold-like appearance, brass flats are relative easy to polish to a desired luster with minimal effort..
• High Quality Brass: Brass Bars have a High malleability and a low melting point, making it easy to machine or form for a wide variety of purposes, including decorative, knife making and other applications..
• Knife Making: Wether you need to fabricate a knife guard, a bolster or a handle this brass bar stock will be perfect for your project..
• Dimensions: 3/8" Tall by 1" Wide by 6" Long | Material: 360 Brass | Composition: Copper 61.5% Zinc 35.5% Lead 3%.

Lancer Tactical AK47 AEG Airsoft Rifle Folding Stock with Battery Charger Colo-Black/Faux Wood

• MATERIAL-ABS Polymer Receiver W/ Metal Outer Barrel Construction. Faux Wood Handguard And Grip For Authenticity.
• GEAR-Durable Metal Outer Barrel And Version 3 Gearbox..
• STOCK-FOLDING SKELETON STOCK TO SWITCH BETWEEN LONG RANGE AND CQB SET-UPS.
• MAGAZINE-MOLDED AK SERIES 600 ROUND HIGH CAPACITY AEG MAGAZINE(Winding Wheel).
• BATTERY-8.4V Nimh Battery Stick Type With Wall Charger.