Reviews Metal Scribe

Contour Gauge Scribe Tool, GOXAWEE Precise Profile Duplicator, Irregular Shape Profile Tool for Woodworking, Van Conversion Projects, Construction Carpenter, Panel, Tiles and Laminate

  • 【Precise profile copy tool】Goxawee scribe tool has two different ends, one pointed and one pulley make it smooth to push. This design can make this duplicator tool provide you a precise copy function in the most working projects, no matter a wavy, folded, or cambered curve, it can accurately copy shape..
  • 【One-hand operated handy scribe tool】This profile tool has two small tents on the body, it can provide a stable movement during the scribe project without any deviation. The handy long design makes the tool easy to hold by one hand, and you don’t need to bring ruler, compass or any other tool in the scribe job, which means no more guess work and complex operations..
  • 【A contour tool can be used in various scenarios】This contour tool is suitable to use in many different projects, such as van conversion projects, flat product to complicated profiles, bath panel to a wall, filler panel between a kitchen base unit and the wall, mark off contoured cornice, and kitchen worktop, and any other scenarios you need to copy a irregular shape..
  • 【Premium material profile tool】The duplicator tool is made by high quality ABS plastic and metal, it is no harm for the surface of the target you would like to shape and duplicate..
Check Stock

Hiboom 8 Pack Mechanical Carpenter Pencils Set with Center Punch, Carbide Scribe Tool, Solid Pencil Marker Tool with Built-in Sharpener, 21 Refills Red Yellow Gray, Great for Woodworking Architect

  • ... red cap on the top can give you a good grip while you apply pressure, unscrewing it can adjust the force of impact.
  • A deep knurled finger grip for easy handling and better control with one hand.
  • This center metal punch great for wood, plastic, metal, glass, and leather.
  • Metal carbide scribe: this carpenter scribe tool has a reliable tungsten carbide tip and knurled aluminum body can offer the maximum control force and comfort.
  • The metal scribe came with a protective vinyl cap over the scriber tip, to help prevent the tip from damaging anything while it is being stored.
  • Ideal for marking measurements and making desired markings.
  • Good combination: you will get 3 pcs solid carpenter pencil with 21 pcs marker refills, 1 piece carbide scriber tool and 1 piece automatic center punch tool.
  • Multiple tools can meet your different woodworking marking needs.
  • Widely applied: this carpenter tool kit can be applied for construction, metal trim, automotive, glass window breaker, works well on wood, plastic, steel and wall.
Check Stock

Adjustable Marking Gauge,Aluminum Alloy Scribing Mortise Gauge Woodworking Marking Gauge Double Head Mortise Gauge for Woodworking,Wood Marking

  • Made of Aluminum Alloy: Aluminum Alloy body, light weight, strong quality, resistant to corrosion, has long service life. Rounded edges, comfortable to handle, won't scratch your hands. Package includes 1pc main woodworking scribe, 2pcs copper nuts, 2pcs straight scribers, 2pcs stainless steel marking rods..
  • Two Adjustable Rods: This Woodworking Scribe Gauge with 2 independently adjustable scribers, can scribe both sides of a mortice at once..
  • Wide Application: The Adjustable Marking Gauge can mark soft metal, wood, ceramic tile, etc. It is great for finding the exact center. Suitable for both amateur DIY and skilled carpenter to use, mainly applied for marking, scribing, laying out upon various joinery or other woodwork..
  • Easy to Operate: The nuts are thickened and the anti-slip teeth are added additionally. Easy to handle and ensures a good work performance and helps to improve efficiency. Both the ink refill and the scribing needle can be used in this scribe, you have multiple choices to help you complete the scribing perfectly..
  • Practical Tools: Equipped with two level bubbles, which can measure the level and also measure the angle of 45 degrees.The horizontal direction is clear at a glance, the workmanship is fine, and the practicability is strong..
Check Stock

Zeglavi Adjustable Marking Gauge Woodworking Scriber Mortise Gauge Aluminum Alloy DIY Draw Line Metal Ceramic Wood Scribing Tools for Carpenter

  • Premium Quality: Aluminum Alloy body, light weight, strong quality, resistant to corrosion, has long service life. Rounded edges, comfortable to handle, won't scratch your hands. Package includes 1pc main woodworking scribe, 2pcs copper nuts, 2pcs straight scribers, 2pcs stainless steel marking rods, 2pcs pen refills..
  • Two Adjustable Rods: This Woodworking Scribe Gauge with 2 independently adjustable scribers, can scribe both sides of a mortice at once..
  • Wide Application: The Adjustable Marking Gauge can mark soft metal, wood, ceramic tile, etc. It is great for finding the exact center. Suitable for both amateur DIY and skilled carpenter to use, mainly applied for marking, scribing, laying out upon various joinery or other woodwork..
  • Easy to Operate: The nuts are thickened and the anti-slip teeth are added additionally. Easy to handle and ensures a good work performance and helps to improve efficiency. Both the ink refill and the scribing needle can be used in this scribe, you have multiple choices to help you complete the scribing perfectly..
Check Stock

Milescraft 8408 Center Finder - Center Scriber and Offset Measuring & Marking Tool for Woodworking

  • Center hole holds the pencil in a perfectly centered position as you scribe your line.
  • Offsets range from 1/16” to 5/8”, in ten 1/16th inch increments.
  • Notches for offset marking let you scribe off-center lines.
  • Rare Earth magnet allows for easy storage on any metal surface.
  • Built-in #2 pencil storage, so you’ll never lose your pencil.
Check Stock

12 Pieces Solid Carpenter Pencil Refills for Constructions, 2.8 mm Deep Hole Mechanical Pencil Replacements Grey Red Yellow Colored Pencil Refills for Scriber Wood Floor Marking Architect Drawing

  • Precise and practical: this deep hole mechanical pencil refills are more sturdy, reliable, and practical.
  • Its 2.8mm diameter allows it to draw in holes that other oily pencils can't enter, so it will be your good refills in your work.
  • Wide applications: long nosed marker refills can applied for scribe tool, carpenter pencil, air graver, carpenter tools, dovetail knife engraver pen, engraving tool, fast cap, glass cutters, glass engraving, glass etch, glass scribe, hardened steel etcher, jewelers dividers, carving supplies, center scriber, layout tool, pen scribe, scratch awl, scribing pen, sheet metal scribe, steel rod, welding markers for steel and welding pencils.
Check Stock

2.8 mm Pencil Refills for Carpenter Mark Pencils, Solid Deep Hole Mechanical Construction Pencil Replacements, Pencil Refills for Woodworking Scriber Marking Architect Drawing, Refills Only (24)

  • ...face is no longer a problem thanks to the yellow and red carpenter pencil refills, you can choose according to the surface color of the drawing place.
  • Three colors can be applied to mark different meanings to make your sketches more clear and easy to read.
  • Wide applications: long nosed marker refills can applied for scribe tool, carpenter pencil, air graver, carpenter tools, dovetail knife engraver pen, engraving tool, fast cap, glass cutters, glass engraving, glass etch, glass scribe, hardened steel etcher, jewelers dividers, carving supplies, center scriber, layout tool, pen scribe, scratch awl, scribing pen, sheet metal scribe, steel rod, welding markers for steel and welding pencils.
Check Stock

DuraMark ChalkShot

  • The tungsten carbide tip is mainly made of metal tungsten and carbon through sintering.The finished tungsten carbide has the characteristics of high hardness and wear resistance..
  • The handle of the tungsten carbide scriber is made of aluminum alloy, so it feels very comfortable to use and achieves a perfect balance in terms of weight. What's more, the handle also has a knurled design, which can provide precise control even if the palm is sweaty..
  • The powerful magnet at the end of the tungsten carbide scriber can help you easily retrieve excess iron filings from the complex engraving patterns..
  • Thanks to the clip in the carbide scribe, you will never lose your scriber again. At the same time, the carbide scribe is also the ideal size for your pocket.
  • Warranty:You would enjoy lifetime warranty from the date of your purchase..
Check Stock

ALLY Tools 12 Inch Precision Wing Divider Scribe Tool/Woodworking Compass with Pencil Holder INCLUDES Two Pencils and Pencil Sharpener Ideal for Drawing Circles, Geometry, Metal, Wood and Leather

  • [ACCURATE]: The woodworking compass makes circles between 1/2″ and 31″ diameter for measuring diameters, angles, and draw circles/arcs without repeat use of a ruler..
  • [QUICK & STRONG]: The large compass features a locking knurled knob enables quick, smooth adjustments until contact with the center collar. The needle point metal tip makes strong engravings and will not slip..
  • [2 IN 1 COMBO]: This compass divider works both as a scribe and compass for all your marking needs. It is the ideal compass for woodworking..
  • [VERSATILE]: This wood scribe tool is perfect for doing large carpentry work, drafting, geometry, metal work, and leather work..
  • [BUNDLE]: The Large Compass includes Two Pencils with Eraser Tops and One Metal Pencil Sharpener..
Check Stock

Center Scriber Marking Tool Center Finder Woodworking Centering Tool Center Scribe for Any Board Up to 2 1/2” Wide TSAIYOGA-2PCS Fits #2 & Mechanical Pencils

  • Handy: Any board thickness is up to 2 1/2”  wide. Center scriber is suitable for Mechanical and #2 pencils..
  • Accurate: Center scribe draws the centerline accurately, also draw 8 different sizes edge  1/16" 3/16" 5/16" 7/16" 1/8" 1/4" 3/8" 1/2" edge..
  • Magnet: The scribe tool is equipped with a magnetic block that can be adsorbed on the metal surface or nails..
  • Material: The centering tool is made of environmentally-friendly ABS plastic and is durable..
  • Applicability: The woodworking center finder is suitable for plate slotting, cutting plate, pin connection, assembly work, marking out mortises and....
Check Stock