Reviews Metal Push In Fitting - BestBuyersPro.com

iCrimp CRQ01 Disconnect Tong Sized 1/2 inch, 3/4 inch, 1 inch, Removal Tool used for Demount Brass Push Fit, Push-to-Connect Fittings

CRQ01 Push-Fit fitting disconnect tool has 3 teeth available in 1/2 in., 3/4 in. and 1 in. sizes, allows for easy removal of brass push-to-connect fitting from pipe.
CRQ01 disconnect tong is the easiest way to disconnect brass Push to Connect fittings in hard to reach places where it can be tough to get leverage on the release collar.
Compact design with wide grip handles. One-handed operation. Quick and easy disassembly.
To use the disconnect tong, slide the tong over the fitting and the pipe. Squeeze the tong to press the fittings collar and pull the pipe from the fitting. Easier to use in tight situations.
The disconnect tool depresses the release collar using the force applied by your hand to allow the teeth of the fitting to release and the fitting to be removed, reducing the risk of installation errors.

6AN female swivel to 3/8 barb fitting 45 Degree.
Please attention that AN6 push lock fitting only be worked with rubber fuel line. It can not be installed on PTFE Hose, Nylon Braided Hose, or....
Thread Size of 6an 45 Degree push lock fitting is 9/16-18UNF and the rubber fuel line which works with should be 3/8"..
Push on locking fittings are much more easier on installation than swivel and PTFE fittings. (high-pressure system not recommended).
EVIL ENERGY Provide plenty kind of fuel fittings, Swivel, Push-on lock, PTFE hose end and other fitting adapters..

2-In-1 Punch and Fitting Insert: The drip irrigation hole punch tool is designed to fit for drip tubing punch and 1/4 fitting insertion use.
Hold the handle of the drip irrigation tubing punch and clamp the tube, gently press it until the tube is pierced.
The hole size is 4 mm/ 0.12 inch to ensure the proper insertion of the connector, fitting and emitter, making the installation more closely fitting..
Quality Material: Punch tools are maded made of high-quality plastic and metal, strong and durable, and the puncher has been polished so it will not become dull And can be used for a long time..
Application: This 2-in-one drip irrigation tubing hole punch & fitting insertion tool can be used to puncture holes when installing drippers and micro-sprinklers in polyethylene tubing..
Easy to Use: Simply press the tool through the tubing and then remove the punch tool with a pre-punched hole left.
Insert the fitting into the tubing, then slide the tubing according to the slot and push the fitting into pre-cut hole..
Humanized Design: The smartly designed fitting insertion tool will make you feel untired even after using it for a long time.
It can help you drill easily and fast and save time and energy for you.
The combination of blue and black color makes the dr....

Bulkhead Fitting Push Connector Type : 3/8 inch, Tube OD 3/8 inch NPT.
Bulkhead Fitting Type: Push In Straight Male Connector.
Body:Nickel Plated Brass Seal, O-Ring NBR.
Bulkhead Fitting Features: high pressure resistant and non tripping, all taper pipe threads are paint Teflon leakage-proof rubber, offering good seal property.
Push Fittings are easy to install, flexible and space-saving, 360-degree rotate freely, Release rings adopt ellipse design, which can be removed conveniently.
Fluid Admitted: Air, Vacuum, Water (No Freezing).
Negative Pressure-100Kpa | -29.5 In Hg. Working Temperature: 0-60¡ãC | 32¡«140¡ãF. Applicable Tube:PU / PA / PE / PVC.

...ure Switch or no cut off water switch will turn pump off, if no water supply - Thermal Safety Swithc - Maximum Speed 1800 rpm - Full load Amps. (0.15/ 0.30 gpm.) 1.38/ 2.00 Amps - Noise level: 75 DB - Maximum Inlet Pressure–100psi.
Filter: - 5 Micron Filter - Filter in the package comes with 3/8 inch inlet- outlet fitting. - Standard pump comes with ¼ inch push lock type fitting.
However, it is placed on 3/8 inch male and ¼ inch female adapter. - Outlet comes with ¼ inch fitting as standard.
however, depending on package requirement it can be modified to 3/8 inch. - Scale free filters can also be added to mist systems to prevent clogging of nozzles due to hard water..
Tubing - ¼ Inch OD Tube - Rated for 1500 PSI - Nylon Tubing - UV Treated - Available in Black, White, Beige and Grey Colors.
Fittings - ¼ Inch - Push Lok – Push to Connect - Nickel Plated - Rated for 2000 PSI - Re-Usable - Misting Tee comes with 10/24 threads - End Plug – Simply connect it to the misting Tee. MC13040-MC13041.

Easily mounts and dismounts, The fitting is Spring Loaded to permit simple attach and detach operation. To detach, simply pull up on the spring loaded mechanism and then slide forward or back and the fitting releases. To attach, rest the fitting in the load track, then push down on the base and push forward..
Single Stud with Round Ring Straight Pull 4,000 lbs.
The fittings' aluminum base and stainless steel ring will not rust. The steel stud/center post is zinc plated to inhibit corrosion..
10 Pieces Single Stud Fitting with Stainless Steel Ring are Included.
Great for ATV's, motorcycles snowmobiles, cargo, furniture, and much more.

Soft foam tips feel comfortable for extended wear.
Cutting-edge look and comfort may increase worker compliance in wearing hearing protection.
Push-to-fit style means no earplug roll-down is required for easy fitting.
Noise reduction rating (NRR) 32 dB CSA class AL.

Safety ear plug features tough look of threaded metal.
Soft foam tips feel comfortable for extended wear.
Cutting-edge look and comfort may increase worker compliance in wearing hearing protection.
Push-to-fit style means no earplug roll-down is required for easy fitting.
Noise reduction rating (NRR) 32 dB CSA Class AL.

Product Name: Straight 1/2“Npt to 1/4" Tube OD Push-in Connect Fittings,1/2" Male Thread Connector Adapter..
Easy Installation: New generation Non-Locking Clip technology offers an easy Diy Installation Without Tools Required, Just Push In to Connect..
Package Included: 1/2"Npt to 1/4" Tube OD Push To Connect Fitting,5 pcs..
Applications Include RO System Beverage Dispensing Refrigerator Ice Maker Coffee Machine etc..
Size&Tube Compatible With:1/4 inch Quick Connect fitting Size,Fits standard 1/4 od Tubing Used On Most Water Purification Systems..