Reviews Metal Coating Epoxy

32OZ Epoxy Resin and Hardener Kit Crystal Clear for Jewelry DIY Art Crafts Cast Coating Wood,Easy Cast Resin with 4pcs Sticks,2pcs Graduated Cups 2 Pairs Gloves,1 Instructions

  • 1:1 Ratio By Volume & EASY TO USE. Teexpert art epoxy resin AB adhesive kit is perfect for artwork art craft cast resin, also for coating epoxy. Very....
  • CRYSTAL CLEAR & SELF LEVEL. The easy clear cast craft resin epoxy pour kit is crystal clear casting and coating system. To ensure better self level....
  • HARD AS A ROCK & NO BUBBLE. The leisure art craft DIY resin epoxy kit is fast curing and hard as a rock if you ensure 1:1 ratio by volume, and stir....
  • WIDE USE & NON TOXIC. The art craft crystal clear epoxy resin and hardener kit is for Jewelry Wood metal steel artwork drawing canvas paintings....
  • 100% MONEY BACK & NOT YELLOW. For any reason you are not 100% happy with the epoxy resin, you can just apply for a full refund at no additional cost.....
Check Stock

West System 105A Epoxy Resin (32 fl oz) Bundle with 206A Slow Epoxy Hardener (7 fl oz) and 300 Mini Pumps Epoxy Metering 3-Pack Pump Set (3 Items)

  • ... Resin (32 fl oz), 206A Slow Epoxy Hardener (7 fl oz), and 300 Mini Pumps Epoxy Metering Pump Set (3-Pack).
  • WEST SYSTEM EPOXY: Based on 105 Epoxy Resin, West System Epoxy is a versatile low-viscosity epoxy system. It is used for boat building, composite construction and repairs that require high-strength, waterproof coating, bonding, and filling. It readily wets out fabrics and porous materials, and is easily modified for a wide range of working conditions and applications.
  • NO STRONG SOLVENT ODOR: 105 Epoxy Resin is formulated without volatile solvents and does not shrink after curing. It has a relatively high flash point and no strong solvent odor, making it safer to work with than polyester or vinylester resins. Resin viscosity is approximately 1000 centipoise (cP) at 72-degree-F (22-degree-C).
  • FIVE-PART RESIN TO ONE-PART HARDENER RATIO: When combined with 105 Resin in a five-part epoxy resin to one-part hardener ratio, this cured resin/206 Slow Hardener mixture yields a rigid, high-strength, moisture-resistant solid with excellent bonding and barrier coating properties. The West System 206 Slow Hardener is not intended for clear coating.
  • GENERAL COATING AND BONDING APPLICATIONS: The 105/206 Epoxy Mixture is used for general coating and bonding applica....
Check Stock

West System 105B Epoxy Resin (126.6 fl oz) Bundle with 206B Slow Epoxy Hardener (27.5 fl oz) and 300 Mini Pumps Epoxy Metering 3-Pack Pump Set (3 Items)

  • ... (126.6 fl oz), 206B Slow Epoxy Hardener (27.5 fl oz), and 300 Mini Pumps Epoxy Metering Pump Set (3-Pack).
  • WEST SYSTEM EPOXY: Based on 105 Epoxy Resin, West System Epoxy is a versatile low-viscosity epoxy system. It is used for boat building, composite construction and repairs that require high-strength, waterproof coating, bonding, and filling. It readily wets out fabrics and porous materials, and is easily modified for a wide range of working conditions and applications.
  • NO STRONG SOLVENT ODOR: 105 Epoxy Resin is formulated without volatile solvents and does not shrink after curing. It has a relatively high flash point and no strong solvent odor, making it safer to work with than polyester or vinylester resins. Resin viscosity is approximately 1000 centipoise (cP) at 72-degree-F (22-degree-C).
  • FIVE-PART RESIN TO ONE-PART HARDENER RATIO: When combined with 105 Resin in a five-part epoxy resin to one-part hardener ratio, this cured resin/206 Slow Hardener mixture yields a rigid, high-strength, moisture-resistant solid with excellent bonding and barrier coating properties. The West System 206 Slow Hardener is not intended for clear coating.
  • GENERAL COATING AND BONDING APPLICATIONS: The 105/206 Epoxy Mixture is used for general coating and bonding applica....
Check Stock

USC 2K Spray Max Epoxy Primer Paint Aerosol

  • RAPTOR Anti-Corrosive Epoxy Primer is a 2K high performance primer specifically designed to be used under RAPTOR Protective Coating to further extend the protective and anti-corrosive properties of RAPTOR.
  • The advanced resin technology in RAPTOR Anti-Corrosive Epoxy Primer improves adhesion to bare metal and most other prepared surfaces, and promotes intercoat performance to further extend the life of RAPTOR protective coating.
  • It contains a blend of anti-corrosive additives to inhibit rust and corrosion and offers excellent salt spray resistance.
  • Can be applied directly over surface rust.
Check Stock

Tru Lustre Metallic Pigment | Mica Powder for Epoxy, DIY Crafts, and More (Copper, 6 oz.)

  • ... with various pigments to create pearlescent, iridescent, 3-D metallic effects that can can be used to create a multitude of special effects on most surfaces. These unique pigments are designed to be field blended with a 100% solids clear epoxy like TI Epoxy HP. When the metallic particles are mixed with a suitable coating they give a shine that reflects light and creates eye-catching dramatic color..
  • Tru Lustre Metallic Pigments are used on a variety of surfaces such as concrete flooring, concrete countertops, & prepared laminate countertops. Other examples are: showrooms, garage floors, restaurants, lobbies, dance floors, casinos, churches, entertainment centers, museums, retail store floors, malls, big box floors, basements and rec rooms. Anywhere that a unique lustrous finish is desired..
  • Twice the potency of competitive products. Easy to add, mix and apply. Variable measured quantities for desired results. Completely customizable. Suitable for many surfaces. Cost effective. Low maintenance..
  • Get different effects w/ light & dark bases/backgrounds. Typically added to gallons of 100% solids epoxy coating at a standard rate of 2 ounces/gallon. In the case of TI Epoxy HP, a typical kit is a 3 gal, so 1 units or 6 oz will be appropriate. Standard a....
Check Stock

TRANSTAR 6131 Gray 2K Epoxy Primer/Sealer - 1 Gallon

  • RAPTOR Anti-Corrosive Epoxy Primer is a 2K high performance primer specifically designed to be used under RAPTOR Protective Coating to further extend the protective and anti-corrosive properties of RAPTOR.
  • The advanced resin technology in RAPTOR Anti-Corrosive Epoxy Primer improves adhesion to bare metal and most other prepared surfaces, and promotes intercoat performance to further extend the life of RAPTOR protective coating.
  • It contains a blend of anti-corrosive additives to inhibit rust and corrosion and offers excellent salt spray resistance.
  • Can be applied directly over surface rust.
  • 1L covers approximately 60 sq feet at 3 MIL.
  • Salt spray resistance test completed at 003e1000 hours according to ASTM B117 at an independent laboratory.
Check Stock

9XW Fasco Epoxies - Steelflex White - Gallon Kit

  • A two-component epoxy coating designed to adhere strongly to wood, aluminum, galvanized surfaces and fiberglass materials after many months of hard use..
  • Strong Abrasion and Impact Resistant Epoxy Coating Perfect for stopping leaky rivets in aluminium boats.
  • 1 Gallon does approximately 120 square feet Dries to a white finish.
  • Epoxy Coating for pretty much any surface except plastic Protects against impact from rocks and debris..
  • Fasco Has been Manufacturing Epoxy compounds and coatings since 1957 Made in the USA.
Check Stock

ArmorPoxy Garage Epoxy Floor Kit for Concrete - 14-Pc 2 Part, Industrial Grade Epoxy Floor Coating - 600 Sq Ft, Gray - For Garage, Basements, Workshops, Contractors, Automotive, Storage, Retail Shops

  • Looking for epoxy flooring kit for your home or business? Join the professionals with ArmorPoxy ArmorPower 14-pc epoxy kit, longer lasting, thicker, superior than basic concrete floor paint, contains all materials for convenient self installation.
  • Enhance the look of your floor with ArmorPoxy epoxy garage floor coating kit - Save time and money, unlike boring gray garage floor paint, enjoy thicker premium multi-color epoxy with flakes of your choice.
  • Professional contractors preferred choice ArmorPoxy 14-piece garage epoxy kit - 2 layers, 3 gals of 100% solids epoxy, 1 gal clear high gloss protective top coat, decorative flakes, roller pads, metal mixer, gloves, paint brush, and more.
  • Increase the value of your property with ArmorPoxy epoxy kit - Unlike water based thin paint, ArmorPoxy is ultra thick, available in multiple colors with flakes, low odor. Ready for foot traffic in 24 hours and vehicular traffic in 3-4 days.
Check Stock

ArmorPoxy Garage Epoxy Floor Kit for Concrete - 14-Pc 2 Part, Industrial Grade Epoxy Floor Coating - 600 Sq Ft, Gray - For Garage, Basements, Workshops, Contractors, Automotive, Storage, Retail Shops

  • Looking for epoxy flooring kit for your home or business? Join the professionals with ArmorPoxy ArmorPower 14-pc epoxy kit, longer lasting, thicker, superior than basic concrete floor paint, contains all materials for convenient self installation.
  • Enhance the look of your floor with ArmorPoxy epoxy garage floor coating kit - Save time and money, unlike boring gray garage floor paint, enjoy thicker premium multi-color epoxy with flakes of your choice.
  • Professional contractors preferred choice ArmorPoxy 14-piece garage epoxy kit - 2 layers, 3 gals of 100% solids epoxy, 1 gal clear high gloss protective top coat, decorative flakes, roller pads, metal mixer, gloves, paint brush, and more.
  • Increase the value of your property with ArmorPoxy epoxy kit - Unlike water based thin paint, ArmorPoxy is ultra thick, available in multiple colors with flakes, low odor. Ready for foot traffic in 24 hours and vehicular traffic in 3-4 days.
Check Stock

ArmorPoxy Garage Floor Epoxy Kit - 14-Pc 2 Part - 300 Sq Ft - Gray, Industrial Grade Epoxy Garage Floor Coating Kit - for Garage, Basements, Workshops, Contractors, Automotive, Storage, Retail Shops

  • Looking for epoxy flooring kit for your home or business? Join the professionals with ArmorPoxy ArmorPower 14-pc epoxy kit, longer lasting, thicker, superior than basic concrete floor paint, contains all materials for convenient self installation.
  • Enhance the look of your floor with ArmorPoxy epoxy garage floor coating kit - Save time and money, unlike boring gray garage floor paint, enjoy thicker premium multi-color epoxy with flakes of your choice.
  • Professional contractors preferred choice ArmorPoxy 14-piece garage epoxy kit - 2 layers, 1.5 gals of 100% solids epoxy, 1 gal clear high gloss protective top coat, decorative flakes, roller pads, metal mixer, gloves, paint brush, and more.
  • Increase the value of your property with ArmorPoxy epoxy kit - Unlike water based thin paint, ArmorPoxy is ultra thick, available in multiple colors with flakes, low odor. Ready for foot traffic in 24 hours and vehicular traffic in 3-4 days.
Check Stock