Reviews Membrane Pressure Tank

Class A Customs | 25 Gallon RV Concession Fresh Water Tank with Plumbing Kit & 12 Volt Water Pump | T-2500-BPK-PUMP

  • ...luding fittings) x 10” x 17”- Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
  • TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads..
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
  • BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thread PVC Male Adaptor (ONE) 5ft. Section of 0.5” ID Vent/Draw Hose (ONE) 5ft. Section of 1.25” ID (1.375” OD) Fill Hose.
  • classAcustoms 12 VOLT Fresh Water Pump MODEL # 12V3 - FRESH WATER USE ONLY - OPEN FLOW 11.6LPM / 3.0GPM AMPS 4.0A MA....
Check Stock

Class A Customs | 42 Gallon RV Concession Fresh Water Tank with Plumbing Kit & 12 Volt Water Pump | T-4200-BPK-PUMP

  • ...ing fittings) x 15.25” x 22.5 - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
  • TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads.
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
  • BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thread PVC Male Adaptor (ONE) 5ft. Section of 0.5” ID Vent/Draw Hose (ONE) 5ft. Section of 1.25” ID (1.375” OD) Fill Hose.
  • classAcustoms 12 VOLT Fresh Water Pump MODEL # 12V3 - FRESH WATER USE ONLY - OPEN FLOW 11.6LPM / 3.0GPM AMPS 4.0A MAX....
Check Stock

Class A Customs | 20 Gallon RV Concession Fresh Water Tank with Plumbing Kit & 12 Volt Water Pump | T-2000-BPK-PUMP

  • ...fittings) x 11.75” x 11.75” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
  • TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads..
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
  • BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thread PVC Male Adaptor (ONE) 5ft. Section of 0.5” ID Vent/Draw Hose (ONE) 5ft. Section of 1.25” ID (1.375” OD) Fill Hose.
  • classAcustoms 12 VOLT Fresh Water Pump MODEL # 12V3 - FRESH WATER USE ONLY - OPEN FLOW 11.6LPM / 3.0GPM AMPS 4.0A MA....
Check Stock

RV Winterize Blowout Adapter, Blowout Adapter for Winterizing with 1/4 Inch Quick Connecting Plug and 3/4 Inch Garden Water Hose Threading, RV Winterizing Kit with Ball Valve for RV Boat Camper

  • ...ing fittings) x 15.25” x 22.5 - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
  • TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads.
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
  • BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thread PVC Male Adaptor (ONE) 5ft. Section of 0.5” ID Vent/Draw Hose (ONE) 5ft. Section of 1.25” ID (1.375” OD) Fill Hose.
  • classAcustoms 12 VOLT Fresh Water Pump MODEL # 12V3 - FRESH WATER USE ONLY - OPEN FLOW 11.6LPM / 3.0GPM AMPS 4.0A MAX....
Check Stock

Membrane Solutions 1812/2012 24-150 GPD RO Membrane Housing Replacement, Reverse Osmosis Membrane Filter Housing with 3 Fittings Elbow, Housing Wrench, Check Valve

  • 【 Standard Size 】 Membrane Solutions membrane housing size is 12.5" X 2.8", which is compatible with RO membranes of 2.0" X 12" 150GPD and below. Compatible with 24GPD / 36GPD / 50GPD / 75GPD / 100GPD / 150GPD ro membrane, easy to install. Can be used to replace CSM, Axeon, Dow FilmTec, GE, and any other 1812 and 2012 RO membranes..
  • 【 Easy Installation 】 The Package Include: 1 * 1812/2012 RO Membrane Housing, Wrench * 1, 1/4" Fittings * 2 and Check Valve * 1,You don't need any other tools. Friendly Design, Easy installation. For the standard RO Membrane, please search for the product ASIN: B07BPX8K5K in Amazon for reference..
  • 【 Not leaking 】 RO Membrane Housing with double Seal design,no-longer any water bypass or leaking problems, thicker bowl increase the compressive capacity and explosion proof strength.
  • 【Durable Construction】Manufactured with FRP(Fiber Reinforced Polypropylene) and ABS, thicker constructed, the membrane housing provides better pressure resitance, excelent anti-explosion performance and heat insulation property. It is capable of resisting acids, alcohol, ammonia, oils, plating solutions and other corrosive chemicals..
  • 【 100% Performance and Quality Tested】 Membrane Solutions membrane housing through multiple high....
Check Stock

Watts Premier WP531407 RO Pure Reverse Osmosis Water Filtration System with Top-Mount, Air-Gap Faucet, Brushed Nickel

  • This Watts Premier Reverse Osmosis system consists of four stages of filtration based upon these treatments: sediment pre-filter reduces dirt, silt and rust.
  • the carbon pre-filter reduces chlorine taste and odors and conditions the water before it is treated by the reverse osmosis membrane.
  • the 50 GPD membrane reduces TDS and other contaminants like chromium, arsenic, copper, lead, and the carbon post-filter reduces chemicals like MTBE's, atrazine, benzene, 2,4-D, and lindane Sediment (WP105311), Carbon (WP105351), 50 GPD Membrane (WP105331) and Post Carbon (WP105381).
  • The system includes a RO Pure Reverse Osmosis module with four pre-installed filters.
  • a brushed nickel, monitored, top-mount, air-gap faucet, and 3 gallon storage tank giving you crystal clear, high-quality, and great-tasting drinking water..
  • This space-saving, compact design allows this system to fit comfortably under your sink, requires fewer tube connections, includes back-flow prevention valves installed between the elements and cartridges have double O-rings so they won't leak..
  • The easy, quick-change push release filter system allows for easy filter change with no need to shut off the water source, is installed with check valves in the filter lid between cartridges to p....
Check Stock

Class A Customs | One (1) RV Fresh and Gray Water 30 Gallon Tank | T-3000

  • ...x 12” x 17.5” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
  • TANK BUILT-IN TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads.: (TWO) 1.5" Balloon Style Threaded Female NPT Standard - fitting will be closed, to use remove inner membrane with razor knife (TWO) .5" Threaded Female NPT Standard - open fitting, unsealed.
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
  • Great extra water storage in RV, pop-up camper, off-road vehicles, concession trailers, hot dog carts, smaller food vendors and portable hand washing sinks. Class A Customs Manufactures this item in the USA in Elkhart, Indiana. Tanks are made in a warehouse clean each tank....
Check Stock

LiquaGen- Super Flow Reverse Osmosis & Deionization (RODI) Water Filtration System | Pressure Gauge with Float Valve | HM Digital TDS Meter - 100 GPD | Ultra Pure Water Softener for 0 TDS/PPM Water

  • ...il refining, chemical, food processing, water purification & more!.
  • SPECIFICATIONS: Air-leak tested, leak-free fittings & long lasting fish tank filter's ensure durability & mitigate chances for damage & breakage. Filtration Stages: 5 Micron Polypropylene Sediment-> UDF Activated Carbon-> Coconut Carbon-> 100 GPD RO Membrane-> DI Cartridge. Garden Hose is included with all tubing & connections. RO Membrane is pre-installed in the membrane housing. If unit is used w/ storage tank you need to add an auto shut-off valve & check valve. Reach out for those parts!.
  • 0 TDS PROMISE: Highest Caliber Nuclear Grade Deionizer Media provides optimal performance for the membrane. The higher the rejection rate of the membrane the longer the DI will last. Many customers use dechlorinators which are designed to neutralize the chlorine in the water but this removes no harmful contaminants from the water. Whereas DI polishes off the remaining TDS of the membrane, leaving fewer TDS out of the membrane making the DI last longer & perform better certifying 0 TDS water..
  • PREMIER MEDIA: Our Activated Charcoal Carbon Media provides an exceptional cost-to-performance value. With high chlorine reduction, great dirt-holding capacity, and greatly reduced carbon fines, you will ....
Check Stock

Hydro Logic 22045 Evolution RO1000 RO Membrane Element

  • The evolution reverse osmosis membrane element 22045 is the replacement ro membrane for the tank less hydro logic ro system.
  • Membrane 22045 has a packaged shelf life. It is best to order when you’re ready to install them.
  • The evolutionro1000 system requires two of these membranes to operate should be replaced every 6 months to 2 years.
Check Stock

Membrane Solutions 400 GPD RO Membrane, Reverse Osmosis Membrane with Membrane Housing, 1/4" Quick-Connect Fittings, Check Valve, Replacement for Under Sink Home Drinking RO Water Filter System

  • [DIY RO System] What You'll Get: ✔400 GPD RO Membrane*1, ✔12" X 3.0" Membrane Housing*1, ✔Wrench*1, ✔Quick Connect Fittings*3. Make your own reverse osmosis water filter right now! You don't need to buy an expensive all-in-one solution..
  • [400 Gallon Per Day] Membrane Solutions High-Quality Reverse Osmosis membrane can produce 400 gallons purified water per day (16.6 gallons / 63.1 liters per hour). 8 glasses of 8oz cups of water are recommended 1 gallon. You can get a gallon of water in about 3 minutes. You just need to open the faucet of the RO purifier using this RO membrane, you can get drinking water..
  • [High Contaminant Rejection] Remove up to 97% of total dissolved solids from water. This membrane is only 0.1nm, 50 times smaller than even the heavy metals. So these RO membranes can easily remove heavy metal, harmful minerals and other soluble salts from water. Enjoy Your Water with Confidence!.
  • [100% Performance and Quality Tested] Membrane Solutions RO membrane uses the most advanced membrane film technology and manufacturing processes, verified by independent laboratory testing. These reverse osmosis membranes are made of the highest quality Polyamide Thin-Film Composite ensures that you get the most filtration and surface area coverage, ....
Check Stock