Reviews Mechanical Gas Meter

10Pcs Car Temperature Gauge Kit-Coolant Temperature Gauge - Digital Temperature Gauge 2inch 52mm Universal Car Truck LED Water Meter Instrument Tool

  • ❃Application: The water temperature meter is used to measure the water temperature of a car. The number and indicator can clearly show the water temperature. - 12v car water temp gauge.
  • ❃ High quality: The water temperature gauge is made of ABS, sturdy and durable.ABS has excellent complete physical and mechanical properties and good low temperature impact proof. Dimensional stability. Electrical properties, wear proof, chemical proof, dyeing, finished product processing and mechanical processing are better. - car temperature gauge kit.
  • ❃Easy to read in the dark: The blue light on the dial makes it easy to read in the dark. Its measurement range is 40-120 degrees Celsius. High sensitivity, easy and convenient to use. - reloj temperatura fae.
  • ❃Application: The water temperature meter is used to measure the water temperature of a car. The number and indicator can clearly show the water temperature. - coolant temp gauge.
  • ❃Principle: The water temperature sensor is a thermistor sensor. Screwed to the engine cooling water channel. The thermistor determines the amount of current flowing through the coil of the water temperature gauge. To guide the meter hands - coolant temp gauge.
  • ❃ High quality: The water temperature gauge is made of ABS, sturdy an....
Check Stock

TTartisan Light Meter with Two Dial to Adjust ISO, Aperture and Shutter Speed, Compatible with Older Leicas and Similar Rangefinder Cameras Black

  • Compact and lightweight: The TTartisan meter is a small, lightweight accessory meter that weighs only 35g, it serves well for people who use older Leicas and similar rangefinder cameras..
  • Shoe-mount design: The meter conveniently slips into the camera's shoe while readings are taken..
  • Two dials: one for ISO and aperture and another one for shutter speed allow settings to be made..
  • LED indicator: A series of LEDs illuminate to tell the user when the correct measurement has been achieved.The TTartisan meter is available in silver or black colours..
  • Mechanical range Limit:Limited by the mechanical range of the dial ligth meter When ISO is 25, the aperture setting with F-number greater than 8.0 is not possible When ISO is 50, the aperture setting with F-number greater than 11 is not possible When ISO is 100, the aperture setting with F-number greater than 16 is not possible.
Check Stock

Argon CO2 Flow Meter Regulator with 80 Inches 6.6Ft Gas Hose for TIG MIG Welder 10 to 60 CFH - 0 to 4000PSI Pressure Gauge CGA-580 Inlet Precise Brass Flow Meter

  • [APPLICATIONS] - Our gas pressure regulator/flowmeter can be used with a variety of gas cylinders including argon, helium, nitrogen, and argon/carbon....
  • [CGA580 CONNECTION] - The Flow Meter Regulator is suitable for standard Gas tanks with CGA-580 inlet connection, with a unique filter port design on....
  • [MEASUREMENT UPGRADE] - The 4000PSI gas meter is more widely used than 3500PSI. If you need to measure more corrosive gases, facing some special....
  • [RELIABLE QUALITY] - The body of our gas flow meter is made of high-quality brass to withstand harsh environments and have a longer life. The....
  • [PACKAGED WITH HOSE] - Our argon regulator package comes with a 2m/6.6 Ft hose that will completely protect you from injury in adverse conditions and....
Check Stock

Handheld Carbon Meter, Portable Precision Detector LCD Digital Display Multipurpose Gas Monitor Tester, 0-1000ppm (Battery Not Included)

  • PROFESSIONAL TOOL: The gas detector is a device that detects the presence of CO gases in an area, often as part of a safety system..
  • EASY TO USE: CO meter detects and measures concentration levels of carbon monoxide gas..
  • HANDHELD SIZE: The CO gas meter is compact and lightweight, professional designed to fit comfortable in your hand, easy to carry and operate..
  • POWERFUL FUNCTION: With a wide measuring range 0-1000PPM, LCD digital display, high accuracy sensor..
  • APPLICATION: Carbon monoxide meter is widely used in petroleum, chemical, coal, metallurgy, paper, fire, municipal, telecommunications, food, textile and other industries..
Check Stock

INA219 High Side DC Current Sensor Breakout - 26V ±3.2A Max

  • 【Mini Split Base Current Transformer】It's the smallest one compared to the similar products (output 100MA).Current Transformer, 100A 100mA AC Current Sensor, Split Core Amp Transformer Sensing Relay, Mini Clip-on Easy to Install CT Without Power Off. current sensor structure sensor.
  • 【Professional Use】Current transducer used for energy meter in special.
  • AC 220v, 380v power supply can both be applied.plit Core Current Transformer,AC Current Sensor,Output Class Analog Sensor,Working Principle Magnetic Sensor, Useful for Measuring Whole Building Electricity Consumption.current sensing relay isolation.
  • 【Good Mechanical Properties】Fully enclosed, good mechanical properties and environmental resistance, strong voltage isolation capability, safety and reliability..
  • 【Snap Joint Structure】The diameter of inner hole is 16mm, the accuracy is 0.5 grade, Using snap joint structure, it can be fixed to the cable directly through nylon ties..
  • 【Easy to use】When you fix the energy meter, you don't need to cut off the power if you use this product. Split Core Current Transformer Coil Sensor for 100A Amp Energy Meter.ac transformer amp meter amp tester.
Check Stock

Cannon Neoprene Rubber Viscometer Holder for CMVC and AIVC

  • ★★【SPECIFICATION】❶Name: Water Meter❷Material: ABS+Copper❸Model: TS-S3003E❹Structure: Rotating Wing Water Meter❺ Installation Method: Horizontal Installation.
  • ★★【FEATURE】High‑accuracy mechanical rotating wing water meter with stable and accurate readings.The total tonnage is visually displayed for easy reading during meter reading..
  • ★★【STABLE PERFORMANCE】The meter has a built‑in filter, which can block large particles with stable performance..
  • ★★【APPLICATION】Compact design, suitable for most metering, mainly used in homes, gardens, etc..
  • ★★【EASY TO INSTALL】Mainly used to measure the flow of cold water in the pipeline and is easy to install..
Check Stock

Argon/CO2 Flow Meter Gas Regulator Compatible with Mig Tig Welder Regulator with 6.6FT Gas Hose 10 to 60 CFH Output Flow 0 to 4000 PSI - CGA-580 Inlet argon flow gauge welding regulator

  • ...rdy and durable, which can withstand harsh environments and have a longer life. Came with 6.6 Ft argon welding gas regulator hose and protective cover are made of impact-resistant composite material for safety and durability.
  • 【Wide Application】Idea choice for CGA 580 Tank Fitting. This Gas Pressure Regulator/Flowmeter Can Be Used with Argon, Helium and CO2 Gas Tanks (CGA-580 Inlet). So it will screw right into the Argon, Argon/CO2 tanks. IDEAL FOR Miller, Lincoln, Hobart, HTP, and most other welders! Idea choice for MIG TIG welding, cutting ,chemical and electronics industry.
  • 【Accurate Gas Flow Gague】Adjustable from 10 to 60 cfh (cubic feet per hour), and is indicated by a ball which moves up and down in the flow tube. 0-4000psi inlet pressure, easy-to-read bottle pressure gauge included, allowing you to view how much gas is left in the tank range 0 to 4000psi. Will fit both the female 9/16" x 18 nut or the male 5/8" x 18 fitting. It also comes with a standard 1/4" barbed fitting.
  • 【Good Design】Use economic style flow meter regulator and single stage piston design, combination of regulator and flow meter as one unit, compact lightweight construction, convenient for use. Argon Regulator is a ideal choice for professional TIG/MIG welding applic....
Check Stock

Oxygen Air Flow Meter LZQ-1 1~5LPM Oxygen Carbon Dioxide Measuring Flowmeter Gauge Oxygen Gas Flow Meter

  • HIGH PERFORMANCE: All kinds of gas measurement accuracy is high, suitable for a variety of occasions, you can avoid the trouble caused by the reading error when you measure..
  • PRECISE: The air flow meter is simple, practical and easy to use. The transparent panel type makes the reading simple, convenient and clear..
  • CONVENIENT: Gas flow meter is an instrument for measuring gas rate of flow, which is installed in the pipeline to record the gas flow..
  • Texture of Material: The gauge consists of acrylic, plastic and metal. Lightweight and durable, suitable for long-term use..
Check Stock

Hxchen 100N/22 lb Hydraulic Support Cabinet Hinge Soft Close Lid Supports & Buffer Telescopic Cabinet Door Gas Spring Glue Head Supports 10' Length - (2 Pcs)

  • Package Included: 2 x Hydraulic Gas Lift Strut Support Rod.
  • Pressure: 100N, Load Bearing: 10-12kg, Extendable length: 0-90mm.
  • Made of high quality stainless steel and nylon material, solid vacuum hydraulic core, wear-proof head, sturdy, durable and practical..
  • Make opening and closing easy and comfortable, for lifting up cabinet door panels etc. silence and soft, convenient and safe..
  • Applicable scope: Electric meter box decoration picture, Fire box, Dustbin, Cupboard door, Furniture door, Mechanical door, Upturned door, Tatami etc..
Check Stock

1 Pack Blue Gas and Bung Wrench Non Sparking Solid Drum Bung Nut Wrench

  • New Blue Non-Sparking Gas and Bung Nut Wrench - 1 Pack.
  • Works on 15, 30, and 55 Gallon Drums ~ Open/Close emergency gas meter shut off valves.
  • 4-in-1 Multi-Functional Tool - 1. Main Wrench - Opens Fine and Course thread Bungs on 15,30, and 55 Gallon Drums / 2. Back of Wrench - Turns off Gas Meter Shut off valves / 3. Handle - Opens 3/4" bung on smaller barrels.
  • Can be used to open the 3/4" bung on smaller barrels.
  • Fits most barrels and drums on the market today..
Check Stock