Reviews Mdf Hdf

Monolith THX-365C Ultra Center Channel Speaker (Each) THX Certified, Premium Drivers, Premium Built Cabinet

  • Precision crossover network: the THX speaker Series feature carefully selected fourth order linkwitz-riley crossover network acoustic filters. This sophisticated crossover minimizes sonic frequency overlap, reduces distortion, and is an excellent choice to minimize off axis response errors near the crossover frequency..
  • Premium built cabinet: high density fiberboard. High quality binding posts. Magnetic grille. Each speaker cabinet is built with HDR, not MDF material. Hdf is better damped than MDF, resulting in a sonically Inert cabinet. Internal bracing has been strategically placed inside to limit unwanted cabinet resonance that could Color the sound. The center channel speaker is outfitted with high quality binding posts, and the bottom has a built-in pad to help isolate it from the surface It is placed on..
  • Woofer drivers: 2x 6.5" Long fiber pulp cones with fear optimized nitrile butadiene rubber (NBR) surround and aluminum shorting ring.
  • Midrange driver: 2" Silk dome midrange with neodymium magnet and aluminum shorting ring.
  • Tweeter driver: 1" Silk dome tweeter with neodymium magnet and copper shorting ring.
Check Stock

FomaSP 11mm Square Carbide Cutter Inserts 11mmx11mmx2.0mm for Wood Turning Roughing Tool,Pack of 10

  • STANDARD SIZE:11mm(Length)x11mm(Width)x2.0mm(Thick)-30°.
  • INDUSTRIAL QUALITY:Made of solid tungsten carbide,hard and durable.
  • 4 Sharpened razor edges which can be rotated to a new razor edge as one side becomes dull.
  • Perfect for general purpose wood, chipboard, plywood and MDF/HDF cutting works.
  • Environmental protection, high efficiency, energy saving, recyclable carbide cutters knife.
Check Stock

LSHUZIYU 6-1/2\ (165MM)-40T, Wood Working Circular Saw Blade. Ultra Thin Kerf 1/16\(1.6MM), Arbor 5/8\

  • ①: Diameter 6 1/2" (165mm), 40T, ATB and Super Thin Kerf is 1/16" (1.6mm), Max Speed RPM 10000.
  • ②：Arbor 5/8" with diamond washer. Please twist out removal, not use hammrer knock out..
  • ③：Laser cut Supper Thin blade body, anti-vibration and expansion slots reduce noise and vibration during operation.
  • ④：High hardness Carbide is design to cut Hard Wood, Plywood, Laminate, MDF, HDF also OK for soft wood.
  • ⑤：Teflon surface coating make the blade anti-sticker for you Very Sharp and Clear cut.
Check Stock

Monolith M-12 V2 12in THX Certified Ultra 500 Watt Powered Subwoofer, Massive Output, Low Distortion, Vented HDF Cabinet

  • ...o the millisecond and are customized for each individual driver. The high efficiency Class D amplifier modules are based on a proven topology that has been continuously refined over the past 4 years. The amplifier has vast reserves of power for highly.
  • Cabinet and Internal Bracing: HDF (High Density Fiberboard), not MDF, was utilized resulting in a sonically inert cabinet. Internal bracing has been strategically placed to increase overall cabinet strength and limit unwanted panel vibrations that would cause discoloration and distortion. The strong cabinet and bracing combine to ensure you hear massive amounts of bass, not cabinet resonances..
  • All Amp'd Up: The Monolith subwoofer amplifier has an extraordinarily high power output of 500 watts RMS (900 watts peak), which can deliver massive amounts of power when needed. Each Class D amplifier is built around a Texas Instruments 48 bit data path (with 28 bit filter coefficients) DSP engine, allowing virtually unlimited design flexibility with the assurance of no signal degradation..
Check Stock

Monolith M-10 V2 10in THX Certified Select 500 Watt Powered Subwoofer, Massive Output, Low Distortion, Vented HDF Cabinet

  • ...o the millisecond and are customized for each individual driver. The high efficiency Class D amplifier modules are based on a proven topology that has been continuously refined over the past 4 years. The amplifier has vast reserves of power for highly.
  • Cabinet and Internal Bracing: HDF (High Density Fiberboard), not MDF, was utilized resulting in a sonically inert cabinet. Internal bracing has been strategically placed to increase overall cabinet strength and limit unwanted panel vibrations that would cause discoloration and distortion. The strong cabinet and bracing combine to ensure you hear massive amounts of bass, not cabinet resonances..
  • All Amp'd Up: The Monolith subwoofer amplifier has an extraordinarily high power output of 500 watts RMS (900 watts peak), which can deliver massive amounts of power when needed. Each Class D amplifier is built around a Texas Instruments 48 bit data path (with 28 bit filter coefficients) DSP engine, allowing virtually unlimited design flexibility with the assurance of no signal degradation..
Check Stock

Monolith M-15 V2 15in THX Certified Ultra 1000 Watt Subwoofer Amplifier, Low Distortion, High Power Output, Vented HDF Cabinet

  • ...o the millisecond and are customized for each individual driver. The high efficiency Class D amplifier modules are based on a proven topology that has been continuously refined over the past 6 years. The amplifier has vast reserves of power for highly.
  • Cabinet and Internal Bracing: HDF (High Density Fiberboard), not MDF, was utilized resulting in a sonically inert cabinet. Internal bracing has been strategically placed to increase overall cabinet strength and limit unwanted panel vibrations that would cause discoloration and distortion. The strong cabinet and bracing combine to ensure you hear massive amounts of bass, not cabinet resonances..
  • All Amp'd Up: The Monolith subwoofer amplifier has an extraordinarily high power output of 1000 watts RMS (1800 watts peak), which can deliver massive amounts of power when needed. Each Class D amplifier is built around a Texas Instruments 48 bit data path (with 28 bit filter coefficients) DSP engine, allowing virtually unlimited design flexibility with the assurance of no signal degradation..
Check Stock

Monolith M-10 V2 10in THX Certified Select 500 Watt Powered Subwoofer - Piano Black Finish | Massive Output, Low Distortion, for Studio and Home Theater Systems

  • ...iver. The high efficiency Class D amplifier modules are based on a proven topology that has been continuously refined over the past 4 years. The amplifier has vast reserves of power for highly accurate, deep bass for your home theater or music system..
  • Cabinet and Internal Bracing: HDF (High Density Fiberboard), not MDF, was utilized resulting in a sonically inert cabinet. Internal bracing has been strategically placed to increase overall cabinet strength and limit unwanted panel vibrations that would cause discoloration and distortion..
  • All Amp'd Up: The Monolith subwoofer amplifier has an extraordinarily high power output of 500 watts RMS (900 watts peak), which can deliver massive amounts of power when needed. Each Class D amplifier is built around a Texas Instruments 48 bit data path (with 28 bit filter coefficients) DSP engine, allowing virtually unlimited design flexibility with the assurance of no signal degradation..
Check Stock

Monolith M-12 V2 12in THX Certified Ultra 500 Watt Powered Subwoofer - Piano Black Finish | Massive Output, Low Distortion, for Studio and Home Theater Systems

  • ...iver. The high efficiency Class D amplifier modules are based on a proven topology that has been continuously refined over the past 4 years. The amplifier has vast reserves of power for highly accurate, deep bass for your home theater or music system..
  • Cabinet and Internal Bracing: HDF (High Density Fiberboard), not MDF, was utilized resulting in a sonically inert cabinet. Internal bracing has been strategically placed to increase overall cabinet strength and limit unwanted panel vibrations that would cause discoloration and distortion..
  • All Amp'd Up: The Monolith subwoofer amplifier has an extraordinarily high power output of 500 watts RMS (900 watts peak), which can deliver massive amounts of power when needed. Each Class D amplifier is built around a Texas Instruments 48 bit data path (with 28 bit filter coefficients) DSP engine, allowing virtually unlimited design flexibility with the assurance of no signal degradation..
Check Stock

LSHUZIYU 7-1/4” 185MM -60T Super Thin Kerf 1/16 1.6MM Arbor 5/8 Anti-Stick Coating Circular Saw Blade FRAMING&Ripping for Laminate Veneer Board Plywood Hard Wood MDF and HDF Cutting

  • ①：Diameter 7 1/4" (185mm), 60T, Arbor 5/8" with diamond washer. Max Speed RPM 8500.
  • ②：ATB and Super Thin Kerf is 1/16" (1.6mm).
  • ④：High hardness Carbide is design to cut Hard Wood, Plywood, Laminate, MDF, HDF also OK for soft wood.
  • ⑤：Teflon surface coating make the blade anti-sticker for you Very Sharp and Clear cut.
Check Stock

LSHUZIYU 7-1/4”(185MM)-40T, Arbor 5/8'-Diamond, Smooth Cut Coasting. Circular Saw Blade, FRAMING&Ripping, for Laminate, Veneer Board, Plywood, Hard Wood, MDF and HDF Cutting

  • ①：Diameter 7 1/4" (185mm), 40T, Arbor 5/8" with diamond washer. Max Speed RPM 8500, ATB and Kerf is 0.094" 2.4mm.
  • ②：Electroplate black anti-stick coating, can make blade much more smoothly and anti-rust.
  • ③：High hardness Carbide is design to cut Hard Wood, Plywood, Laminate, MDF, HDF also OK for soft wood..
  • ④: RIPPING and FRAMMING, Please wear protective equipment such as goggles, gloves, masks, etc..
  • ⑤: Knock out diamond washer, please note the washer only can knock out from back side. if this side can't, try another..
Check Stock