Reviews Masonry Tools

CertBuy 4 Pcs Pointing Trowel Set, Masonry Hand Trowel with Soft Grip Handle for Traffic Construction, Housing Construction, Industrial Construction, Others

  • [Dimension]: The size of masonry tools trowels is 6 inch blade, 5 inch grip, 2.8 inch width..
  • [Feature]: Heavy duty brick trowel with high-quality material, soft grip handle, non-slip grip, polished surface.
  • [Application]: The versatile blade of brick pointing trowel is great for mixing, scraping and repair. Quality hand tools for the concrete, masonry, asphalt, plaster, drywall, tile, floor covering, and leveling trades..
  • [Package Included]: 2 Pcs pointing trowel and 2 pcs gauging trowel 6 inch..
  • [To Use]: It is used to scoop up pre-mixed mortar from a container and lay that mortar across a course of bricks, brick tools to easier your work..
Check Stock

Rockwell RW8946 Sonicrafter Oscillating Multitool 3-1/8-inch Universal Fit Carbide Grit Semicircle Blade

  • Universal fit adapts to other oscillating tools.
  • Use to remove grout, porous concrete, and masonry..
Check Stock

Dremel US410-01 Ultra-Saw 4-Inch Diamond Surface Prep Abrasive Wheel , Green

  • Diamond chip technology for high performance surface preparation..
  • Ideal applications include concrete, tile, brick, masonry and cement..
  • Accessory is compatible with all Dremel corded and cordless Ultra Saw tools..
  • Quickly smooth bumps and cracks in concrete before finishing and to remove thinset mortar for tile remodeling..
  • Use your Ultra-Saw for concrete, masonry and tile surface preparation.
Check Stock

Nylon Hammer Drive Pin Nail in Masonry Concrete Anchors Zinc Nail 1/4 x 3 Qty 250

  • 1/4 inch Diameter Nylon Mushroom Head Nail In Masonry Anchors with Zinc Plated Steel Nails.
  • Using a pre-drilled hole, they are installed with hand tools (typically a hammer).
  • Drive the pin into the anchor body, expanding the anchor, to form a tight fit.
  • Rust resistant nylon and zinc plated nail.
  • Designed for light duty masonry applications.
Check Stock

Nylon Hammer Drive Pin Nail in Masonry Concrete Anchors Zinc Nail 1/4 x 1 Qty 100

  • 1/4 inch Diameter Nylon Mushroom Head Nail In Masonry Anchors with Zinc Plated Steel Nails.
  • Using a pre-drilled hole, they are installed with hand tools (typically a hammer).
  • Drive the pin into the anchor body, expanding the anchor, to form a tight fit.
  • Rust resistant nylon and zinc plated nail.
  • Designed for light duty masonry applications.
Check Stock

Clab Depot Notch Trowel 1/4 x 1/4 Square Notched Trowel for Tile Masonry

  • All Purpose Mason’s Trowel – Our flat trowel can support all your DIY and pro construction projects including grout, putty, brick and mortar, cement, tin set, and other common masonry materials..
  • Flat European Style Design – The wide, flat shape of this cement trowel gives you more options when spreading or managing putty or mortar to help you get it smooth and stick it into crevices or between tiles..
  • Non-Slip Rubber Grip Handle – Each brick trowel also features a rugged slip resistant handle that adds shock absorption and helps give you more control over your movements and spreading..
  • Professional Grade Craftsmanship – This rust and corrosion resistant masonry trowel was crafted with heavy-duty stainless-steel construction to provide more strength and balance for every tough job..
  • Trusted MASTA Quality – Here at MASTA Professional Tools we take pride in creating high quality, durable, and built to last tools that support your every job. Contact us with any questions for fast support..
Check Stock

6 Inch Carbide Hole Saw Bit Concrete Hole Saw 152mm Carbide Hole Cutter Drill Stucco Brick Fiberglass Reinforced Plaster And Ceramic Tile Saw Through Cement Block and Drywall For Recessed Lighting

  • ...rick Walls To Run Conduit For Electric Cables And Pvc Water Pipes And Waste Pipes..
  • TILE HOLE SAW Drill Ceramic Wall Tiles And Low Density Subway Tile Without Hammer Drill Setting, When Used As Concrete Tools Hammer Drill Is A Must So The Tct Hole Saws Are Best Used With Our Hole Saw Abors That Already Come With Tct Masonry Drill Bits For Pilot Bit No Point Having A Hole Saw That Can Cut Holes In Brick If The Pilot Drill Set Will Not..
  • MANY SIZE GRIT HOLESAW BITS Available Either As Carbide Hole Saw Kit Or Individually From 5/8 16mm To 7" 178mm, These Tungsten Holesaw Bits Are Also Available Including Hex Hole Saw Arbor Or Including Sds Plus Hole Saw Arbor Mandrel inc TCT Pilot.
  • WHO USES OUR CARBIDE HOLE SAWS Plumbers Electricians Contractors for Masonry Tools Home Builders Boat Builders Aviation FiberGlass Car Body Installers Fiberglass Pool and Fiberglass Tub Manufacturers Carbon Fiber Modellers Hobbyists..
Check Stock

4 Inch Carbide Hole Saw Bit Concrete Hole Saw for Dryer Vent and Drywall for Recessed Lighting 102mm Carbide Hole Cutter for Stucco Brick Fiberglass Reinforced Plaster Ceramic Tile and Cement blocks

  • ...rick Walls To Run Conduit For Electric Cables And Pvc Water Pipes And Waste Pipes..
  • TILE HOLE SAW Drill Ceramic Wall Tiles And Low Density Subway Tile Without Hammer Drill Setting, When Used As Concrete Tools Hammer Drill Is A Must So The Tct Hole Saws Are Best Used With Our Hole Saw Abors That Already Come With Tct Masonry Drill Bits For Pilot Bit No Point Having A Hole Saw That Can Cut Holes In Brick If The Pilot Drill Set Will Not..
  • MANY SIZE GRIT HOLESAW BITS Available Either As Carbide Hole Saw Kit Or Individually From 5/8 16mm To 7" 178mm, These Tungsten Holesaw Bits Are Also Available Including Hex Hole Saw Arbor Or Including Sds Plus Hole Saw Arbor Mandrel inc TCT Pilot.
  • WHO USES OUR CARBIDE HOLE SAWS Plumbers Electricians Contractors for Masonry Tools Home Builders Boat Builders Aviation FiberGlass Car Body Installers Fiberglass Pool and Fiberglass Tub Manufacturers Carbon Fiber Modellers Hobbyists..
Check Stock

Goldblatt - G06993 GOLDBLATT Brick Hammer, 20 Oz Bricklayers Masonry Hammer, 12-Inch Hickory Wood Handle

  • 【FORGED STEEL HEAD】- Made of high grade forged steel, the brick hammer features strong wear-resistant, great hardness and strength to ensure durability. Polished finish and sand blasting treatment on the surface, balances the function and good-looking.
  • 【HAMMER FEATURE】Larger hammer face and wider blade are perfect for tackling tough jobs.
  • 【GENUINE HICKORY HANDLE】12 inch wood handle, features large contoured fitting well in hand, ensures comfort and easy control, reduce the force during use. The hardness on striking face and flat tip is 45-60HRC, meet your most job needs.
  • 【WIDE APPLICATION】Perfect for striking, shaping, breaking or chipping brick, concrete or stone in masonry construction, prospecting, mining and geological research. Suitable for stone masons, brick layers, geologists, quarry workers, carpenters and DIYers.
  • 【BRAND STORY】Goldblatt delivers high quality tools since 1885. Goldblatt designs and distributes trendy tools in the masonry, concrete, drywall, tile and paint tool around the world. If you have any request, we are always here to help you.
Check Stock

Pumie HDW-12T Heavy-Duty Scouring Stick, (3 Pack)

  • ...eral deposits, limescale, bakes on food, stains. Cleans tubs and showers, removes unsightly toilet rings.
  • SCOURING STICK SIZE: 5.25x1.25x.075. A 100% US Pumice product used by professionals for 75 years. Works through gentle abrasive action. Cleans Ceramic tile, Porcelain, Masonry, Concrete and Iron. Restores Tools, Pools and Barbecues.
  • SAFE AROUND CHILDREN AND PETS: Quickly shapes to curved or flat surfaces. Won’t harm hard surfaces. Safe for skin. Safe for hands. Safe around children and pets.
  • DIRECTIONS FOR USE: Pumie must be used with water. First wet the stick, then rub the edge of the stick on the surface you wish to clean using back and forth strokes. The paste buildup helps to clean and polish. Wash cleaned surface of residue. Rinse under running water to clean..
Check Stock