Reviews Marlin 39a Scope Mount Base

Higoo Low Profile Top Rail Picatinny/Weaver Scope Mount 11 Slots for Marlin Lever Action with Wrench

  • Material: Aluminum Alloy. Length: 4 3/4" (120mm). Width: 5/6" (20.8mm)..
  • It is solid 11 slots picatinny rail mount for your optic, scope, laser sight and allows an adjustment in their mounting positions..
  • The picatinny rail fits for Marlin 336, Marlin 30-30, marlin 1895 45-70, Marlin 1894, Marlin 30AS, Marlin 30AW, Marlin Camp 9, Marlin Camp 45, Marlin 1894C 357, Western Field 740, etc..
  • Holes align in straight line and have proper spacing for Marlin lever action..
  • Easy setup with all screws and an allen wrench provided..
Check Stock

Monstrum Picatinny/Weaver Rail Mount for Marlin 336/1894/1895 Series Lever Action Rifles | 0 MOA

  • Picatinny/Weaver rail mount built specifically for Marlin 336/1894/1895 Series lever action rifles.
  • Scope mount installs directly to receiver via the factory mounting holes and included set screws with no additional hardware required.
  • Allows for the mounting of Picatinny or Weaver standard scope rings, scope mounts, red dots, or other optics.
  • Available in two styles - a 0 MOA mount for zeroing your scope at short to mid range distances and a 20 MOA mount for zeroing your scope at long distances.
  • All Monstrum scope mounts and accessories come with a lifetime guarantee.
Check Stock

Monstrum Picatinny/Weaver Rail Mount for Marlin 336/1894/1895 Series Lever Action Rifles with Integrated Level Bubble | 0 MOA

  • Picatinny/Weaver rail mount built specifically for Marlin 336/1894/1895 Series lever action rifles.
  • Scope mount installs directly to receiver via the factory mounting holes and included set screws with no additional hardware required.
  • Allows for the mounting of Picatinny or Weaver standard scope rings, scope mounts, red dots, or other optics.
  • Integrated level bubble built into the rear of the rail to check for consistent vertical alignment of your rifle.
  • All Monstrum scope mounts and accessories come with a lifetime guarantee.
Check Stock

Blam Blam Fever - Rifle Ranch Version

  • Tactical Tan Cheekrest With Integral Stock Riser + USA FLAG Morale Patch + Detachable Accessory Pouch !.
  • Fits Marlin 22 1895 336 39A 60 795 XT Series Ruger PC4 PC9 Carbine 22 10/22 77/22 Gunsite Scout N0.1 Hawkeye M77 77/22 Mini14 Mini30 American Ranch.
  • This item Cannot be Exported Outside the USA.
Check Stock

Weaver Style See-Through Long Scope Mount Rail For MARLIN 992M 989 .22 9 45 30AS 30AW 36 62 93 336 336C 375 444 1993 1894 Cowboy 1895 Mossberg 640 Western Field 740 Glenfield 30 Camp 9 40 45 Carbine

  • M1SURPLUS Brings You Another Must Have Accessory For Your MARLIN Rifle.
  • This is a Weaver Style Bolt-On "LONG" Scope Mount Rail - Allows You To Attach Your Choice Of Optics - Comaptible With Most Rifles Scopes,, Red Dots and Reflex Sights.
  • For Use WIth Marlin Rifles That Have 4 Factory Screw Hoels Drilled On Top / Fits MARLIN 992M, 989, .22, 9, 45, 30AS, 30AW, 36, 62, 93, 336, 336C, 375, 444, 1993, 1894 Cowboy, 1895, Mossberg 640, Western Field 740, Glenfield 30, Zane Grey, Camp-9 Carbine.
  • Perfect Enhancement For Hunting and Target Shooting.
Check Stock

Modkin Scope Rings, Rifle Scope Mount High Profile Scope Mounts for Picatinny Rail (1 inch, Set of 2)

  • Double scope ring mount for Picatinny/ Weaver Rail (21mm)..
  • Design in hollowed-out configuration between the ring and the bottom of the base, to release heavy duty when clamping your scope..
  • Built-in tape inside per rings to prevent from marring the scope, also prevent sliding and holding postion accurately..
  • The ring is for most scopes which are in 1 inch / 25.4mm scope tube. High profile, 0.71 inch gap from base of mount to bottom of rings. ( Item height: 2 inch).
  • With 1 rail clamp screw and 2 scope clamp screw per side, ensure mount any 1 inch scope firmly, just twist off the nut and mount the base on the 21mm rail easily..
Check Stock

Athlon Optics Precision 34mm MSR Ring, Black (701007)

  • Double 1'' scope ring mount for Picatinny/ Weaver Rail (21mm)..
  • Design in hollowed-out configuration between the ring and the bottom of the base, to release heavy duty when clamping your scope..
  • Built-in tape inside per rings to prevent from marring the scope, also prevent sliding and holding postion accurately..
  • The ring is for most scopes which are in 1''/ 25.4mm scope tube. High profile, 0.98'' gap from base of mount to bottom of rings. ( Item height: 2.1'').
  • With only 1 rail clamp screw and 1 scope clamp screw per side, just twist off the nut and mount the base on the 20mm rail easily..
Check Stock

UTG M1 Carbine Mount Complete with 1\ Rings , Black

  • Design for All Standard Pi-catinny Rails. 2 Type of Different Heights 1 inch Scope Mount Rings Contain 2 Pack High Profile Rings and 2 Pack Medium Profile Rings. Perfect for All Standard 21mm Rails. Perfect for Mounting Most Scopes Which Are in 1''/ 25.4mm Scope Tube..
  • Four Set Of Two Type 1'' Scope Rings, 2 Pack Medium Profile, 0.5'' Gap from Base of Mount to Bottom of Ring. ( Item height: 1.9''). 2 Pack High Profile, 0.71'' Gap from Base of Mount to Bottom of Ring. ( Item height: 2.0'')..
  • Hollowed-Out Design & Built-In Tape Protection: Design In See-Through Style, Provide Potential Visibility For Open Sights, Meanwhile Hollowed-Out Configuration Helps To Release Heavy Duty When Clamping Your Scope. Built-In Tape Inside Per Rings To Prevent From Marring The Scope, Also Prevent Sliding and Holding Postion Accurately..
  • Premium Aircraft Aluminum, Solid & Durable: Precision Machining of Aircraft Grade 6061 Aluminum Alloy + High Strength Steel In Black Matte Anodizing Finish, Sturdy & Lightweight Construction, High Quality, Sturdy Construction, Build No Wobble, Offer Durable Safe Performance In The Field..
  • Rail Clamp Screw Design & Easy To Install: With 1 Rail Clamp Screw and 2 Scope Clamp Screws Per Side, Ensure Mount Any 1'' Scope Firmly, Just Twist On/Off....
Check Stock

EGW Picatinny Rail Scope Mount Savage Rascal

  • Double scope ring mount for 11mm dovetail rail, specialized scope mount for Airgun/.22 Rails..
  • Design in hollowed-out configuration between the ring and the bottom of the base, to release heavy duty when clamping your scope..
  • Lightweight: 1.15oz per ring. High profile, 20mm/0.79in gap from base of mount to bottom of rings. ( Item height: 1.97'').
  • The ring is for most scopes which are in 1''/ 25.4mm scope tube..
  • With only 1 rail clamp screw and 1 scope clamp screw per side, quick and easy to install. Precision and Repeatable Alignment..
Check Stock

Feyachi RM26 Picatinny Riser Mount, 0.75 inch 5 Slots Riser Mount for Red Dot Sight

  • ✌【Perfect for All 21mm Picatinny Rails】LONSEL 4 set of different heights 1'' scope mount rings include 2 pcs medium profile + 2 pcs high profile in one package. These scope rings fit for all 21mm standard picatinny rails, perfect for mounting most scopes which are In 1''/ 25.4mm scope tube. Available in two styles, A must have scope rings for hunting shooting!.
  • ✌【4 Set Of Two Styles 1'' Scope Rings】2 Pcs Medium Profile: 0.5'' gap from base of mount to bottom of ring, Item Height 1.9'', Dimension 1.9 x 1.6 x 0.8 Inch, Weight 2 Oz per ring.
  • 2 Pcs High Profile: 0.71'' gap from base of mount to bottom of ring, Item Height 2.0'', Dimension 2.0 x 1.6 x 0.8 Inch, Weight 2 Oz per ring..
  • ✌【Hollowed-Out Design & Built-In Tape Protection】Design in see-through style, provide potential visibility for open sights, meanwhile hollowed-out configuration helps to release heavy duty when clamping your scope. Built-in tape inside per rings to prevent from marring the scope, also prevent sliding and holding postion accurately..
  • ✌【High Quality Aluminum, Solid & Durable】Precision machining of aircraft grade 6061 aluminum alloy + high strength steel in black matte anodizing finish. Sturdy & lightweight construction, build no wobble, offer durable safe p....
Check Stock