Reviews Marine Fuel Line

LTI Universal 10ft Nylon Stainless Steel Braided 5/8\ AN10 PTFE E85 Fuel Line Hose Injection (BLACK, 10AN)

  • ...urbo oil feed and boost line, transmission oil cooler line, EFI fuel line, carb fuel line, ls engine swap fuel line, fuel return line, vapor return line, vacuum line, fuel supply line and other high temperature high pressure applications..
  • Application: fuel, lube, alcohol, ethanol, coolant and air for automobiles or marine engines, most suitable for racing cars & motor racing bikes. Working temperature range: -76℉ to 446℉ (-60℃ to 230℃). Pressure Rating: Maximum Working Pressure (psi): 2000 psi. Bursting Pressure (psi): 6000psi..
  • This hose is made of high-quality PTFE on the inside that gives them high chemical and heat resistance, along with a braided Black Nylon outside which gives them high durability, extreme pressure resistance, and Professional installation is highly recommended..
  • 10AN PTFE E85 Fuel Hose Length: 10ft. Inner Diameter: 0.5" (12.95mm). Outside Diameter: 0.62" (16mm) . Please measure before purchase! Fit for AN PTFE hose end fitting ONLY..
  • We Provided 12 months warranty from the date of purchased. Free return within 30 days NO QUESTION ASK..
Check Stock

New All Balls Fuel Pump Module 47-1029 Compatible With/Replacement For Can-Am Outlander DPS 450 EFI, Outlander DPS 570 EFI 2016-2020, Outlander L 450 EFI 2015-2016, Outlander L 500 EFI 2015

  • ➰APPLICATION- All fuel, lube, alcohol, ethanol, coolant and gas for automotive and marine. Black braided PTFE fuel line can be used as fuel injection hose, turbo oil feed and boost line, transmission oil cooler line, EFI fuel line, carb fuel line, ls engine swap fuel line, fuel return line, vapor return line, vacuum line, fuel supply line and other high-temperature and high-pressure applications..
  • ➰WORKING ENVIRONMENT-Maximum Working Pressure=725 psi(5 mpa). Bursting Pressure=2175psi(15 mpa). Working Temperature Range=-40℉ to 392℉(-40℃ to 200℃)..
  • ➰SIZE- length=20 feet. Inner diameter=0.51 inches (12.95 mm). Outer diameter=0.63 inches (16 mm)..
  • ➰MATERIAL- Inner layer: PTFE (Teflon) rubber.
  • middle layer: 304 stainless steel wire mesh sleeve.
  • outer layer: braided nylon. PTFE fuel lines are more resistant to high temperature and pressure..
  • ➰NOTE- PTFE hoses are relatively hard and cannot be bent or folded in half.Double check the hose size before ordering.Professional installation is highly recommended..
Check Stock

Mercury Marine Quicksilver New OEM 6.6 Gallon Gas/Fuel Tank &Line 1200-8M0054600

  • All Quicksilver tanks meet ABYC, CSA, & UL standards. High strength blow molded construction with protection against UV exposure and aging to help prevent fading and keep plastic pliable for longer life."Standard" tanks are furnished with 1/4"-18 threaded fuel line fitting and a manual venting cap."Premium" tanks include a 1/4" NPT threaded fuel line opening, a mechanical fuel gauge and top vented fuel cap..
  • Mercury Marine Quicksilver New OEM 6.6 Gallon Gas/Fuel Tank &Line 1200-8M0054600.
Check Stock

Taiss ID Fuel Line Kit, 1/4\ (6mm), 6FT(2m) Fuel Line Hose + 10PCS 2/5\ (11mm) ID Hose Clamps. Suitable For Small Engines: Tractors, Mowing Machine, Snow Machine, Etc.

  • Compatible with ethanol blended fuels, Engineered low permeation material prevents fuel evaporation..
  • INCLUDE - The marine fuel line assembly includes a premium quality rubber bulb(a free primer bulb for you)and 6ft 3/8in fuel hose, 360°stainless steel hose clamps..
  • FITMENT - This is universal fuel line and as such do not come with engine or tank fittings,Suitable for Boats, RVs, Tractors, and Caravans..
  • FUNCTION - Keep your fuel line operating at peak performance with our BARTOO fuel line assembly,and ensure your outboard motor runs smoothly..
  • NOTICE - This is rubber product, please do not store this item under direct sunlight or other rough environment..
Check Stock

8AN Fuel Line Kit 16FT with Fittings Nylon Braided 1/2' 16 ft CPE Fuel Oil Hose - Not for PTFE E85

  • Application: Universal fuel line hose, Such as fuel, lube, alcohol, ethanol, coolant, and air for automobiles or marine engines, most suitable for racing cars & motor racing bikes..
  • Reliable Material: The fuel line hose based on high-quality stainless steel, aluminum alloy and nylon, it has excellent flexibility and wear resistance. The outer nylon braid has excellent flame resistance and is safe to use..
  • The fuel line hose Maximum Working Pressure of Braided Steel Fuel Hose (psi): 500 psi. Bursting pressure (psi): 2000psi. Operating temperature range: -40°F to 257°F (-40°C to 129°C). Before buying, make sure that the pressure and temperature range are suitable for your application..
  • Package Includes: 10pcs 8an rotating hose ends (4 straight, 2pcs 45 degrees, 2pcs 90 degrees, 2pcs180 degrees),2pcs 8an hose separator clamp,1pcs gloves,1/2 braided fuel pipes (length: 16 feet). Hose ID: 0.44 inch (11.13 mm). The outer diameter of the hose: 0.67 inches (17.02 mm)..
  • Perfect Replacement: Fuel line hose, reliable material can safely replace the original parts, covered with high-quality braided nylon, enhance flexibility and provide a cool racing appearance.
Check Stock

Quicksilver 16248 in-line Fuel Filter - Mercury and Mariner 2-Cycle and 4-Stroke Outboards

  • Under the cowl fuel filter for Mercury and Mariner outboards.
  • Protects Your 2-Cycle or 4-Stroke outboard from damaging contaminants.
  • Produced to meet Mercury Marine original equipment manufacturer specifications to best protect your engine.
  • Easy to replace in-line to fuel line with existing hose clamps and common tools.
  • Translucent plastic allows you to check for fuel content and debris.
Check Stock

Five Oceans FO4285 Marine Boat Fuel Line, Outboard Fuel Line with Primer Bulb for Yamaha/Mercury, 2 Quick Connectors, 3/8 Inch Hose x 6 Ft, Reinforced EPA/CARB, Compatible Ethanol Blended Fuel

  • Package Includes a Fuel Line Assembly 3/8 Inch Hose 6 Feet Long, a Premium Primer Bulb, 2 Yamaha/Mercury Female Quick Connectors and 2 Stainless Steel Hose Clamps.
  • Compatible with All Yamaha/Mercury Engines and Fuel Tank Models (Mercury Before 1998). Meets USCG type B1-15 SAE J1527 and ABYC Accepted Standards. Reinforce Hose Approved by Environmental Protection Agency EPA and CARB regulations.
  • Multi-layer Low-permeation Primer Bulb 3/8 Inch Hose that provides reliable and efficient priming to help start your boat engine.
  • Primarily used for fuel feed. Compatible with gasoline up to 85% ethanol-blended fuels, diesel, and all bio-diesel blends.
  • Engineered and designed with marine-grade material. This Fuel line is weather and UV Resistant. FIVE OCEANS, 40 YEARS developing High-Quality Marine & Outdoor Products.
Check Stock

3/8 6AN 20FT Fuel Line Hose Kit, Nylon Stainless Steel Braided Fuel Line Oil/Gas/Fuel Hose End Fitting Hose with 10PCS Swivel Fuel Hose Fitting Adapter Kit - Black

  • Nylon Braided CPE Fuel Line: Best for oil gas line, fuel hose, clutch hose, turbo line. Recommended for alcohol, nitro, transmission, clutch, power steerig, oiling, hydraulic and vacouum applications..
  • Universal Application: The fuel line hose fits different brands of different cars. Such as automobiles or marine engines, most suitable for racing cars & motor racing bikes..
  • Hose Material: Covered with high quality woven Nylon and Stainless Steel Braided + CPE Synthetic Rubber to enhance flexibility and give a cool racing appearance.
  • The fitting is made of T6061 Aluminum, anodized finish for high strength and good durability..
  • Safety Features For Your Protection: Fuel Hose: Size(ID): 6AN, Length: 20FT, Working Temperature: -100℉ to 500℉ (-73°C to + 260°C) , Pressure Tolerance: 500 PSI, the fuel line has good flame retardancy and excellent corrosion resistance..
  • Package Includes: 1 x 6AN 20FT Nylon Braided Hose, 4 x Straight Swivel Hose Ends, 2 x 45 Degree Swivel Hose Ends, 2 x 90 Degree Swivel Hose Ends, 2 x 180 Degree Swivel Hose Ends. Professional Installer is Highly Recommended. Exchange or return for free if leak..
Check Stock

Five Oceans FO3100-C1 Reinforced EPA/CARB Fuel Line with Primer Bulb (Kit to Assemble) for OMC, Johnson & Evinrude, 6 ft x 5/16 inches Hose, Compatible with Ethanol Blended Fuels

  • FIVE OCEANS KIT includes: Primer Bulb Fuel Line with 5/16 inches Hose, two (2) OMC, Johnson and Evinrude 5/16 inches barb female connectors (FO-2885) and two (2) Stainless Steel Hose Clamps (FO-2324)..
  • Approved by Environmental Protection Agency (EPA) and CARB regulations..
  • Universal Fuel Line: 5/16 inches Hose with a 6-feet long fuel line (FO-3100). Made of Molded acetal plastic. Meets and exceeds fuel flow requirements for OMC outboards..
  • Compatible with Ethanol Blended Fuels. Engineered low permeation material which prevents fuel evaporation. Not mention, suitable for Boats, RVs, Tractors, and Caravans..
  • FIVE OCEANS with more than 40 years of experience manufactures the best quality products at the most competitive price.. FIVE OCEANS, 40 YEARS developing High-Quality Marine & Outdoor Products.
Check Stock

Five Oceans 3/8 Marine Fuel Line Yamaha Mercury Outboard Fuel Line Boat Fuel Line Hose EPA/CARB Replaces 22-13563A3 22-13563Q3 22-14213M 2214213Q 22-13563Q7 22-13563A7 22-13563A6 22-13563T7

  • COMPATIBILITY: Fuel line hose connector, female, with 3/8 Inch hose barb for use on Force 40 hp & larger (1993 & newer), 9.9/15/25 hp (1998), and all Mercury/Mariner outboards using clip-on type disconnect at engine end & 3/8 Inch I.D. fuel line. All Yamaha/Mercury Outboards and Mercury Fuel Tank Side - 1 End Replaces Original Mercury (OE) Part #: 22-13563A3, 22-13563Q3, 22-14213M, 2214213Q and 1 End Replaces Original Mercury (OE) Part #: 22-13563Q7, 22-13563A7, 22-13563A6, 22-13563T7.
  • PACKAGE INCLUDES: Fuel Line Assembly 3/8 Inch Hose 6 Feet Long, a Premium Primer Bulb, 2 Mercury Female Quick Connectors, and 2 Stainless Steel Hose Clamps.
  • MULTI-LAYER: Low-permeation Primer Bulb 3/8 Inch Hose that provides reliable and efficient priming to help start your boat engine.
  • FUEL COMPATIBILITY: Primarily used for fuel feed. Compatible with gasoline up to 85% ethanol-blended fuels, diesel, and all bio-diesel blends.
  • DURABLE MATERIAL: Engineered and designed with marine-grade material. This Fuel line is weather and UV Resistant. Meets USCG type B1-15 SAE J1527 and ABYC Accepted Standards. Reinforce Hose Approved by Environmental Protection Agency EPA and CARB regulations.
Check Stock