Reviews Marine Fuel Hoses

Two Little Fishies ATL5410W 6-Piece Plastic Hose Clamp Set, 3/4-Inch

  • ... in confined spaces to prevent flow leakage. These clamps also can be recycled and reused due to the 304 stainless steel material which makes them worked last for long.
  • WIDELY USED – The pipe tube clamps are used in securing hoses, pipe, cable, tube, fuel lines etc. Perfect to apply in automotive, industrial, boat/marine, shield, electronic or home applications.
Check Stock

Selizo 40Pcs Hose Clamp Including 7 Sizes Adjustable Pipe Tube Clamps 304 Stainless Steel Hose Clips

  • ... in confined spaces to prevent flow leakage. These clamps also can be recycled and reused due to the 304 stainless steel material which makes them worked last for long.
  • WIDELY USED – The pipe tube clamps are used in securing hoses, pipe, cable, tube, fuel lines etc. Perfect to apply in automotive, industrial, boat/marine, shield, electronic or home applications.
Check Stock

HELIFOUNER 90 Pieces 1/4\-15/16\ 304 Stainless Steel Single Ear Hose Clamps with Pincers Kit

  • 【Sizes】6-7mm, 7-8.7mm, 8.8-10.5mm, 10.3-12.8mm, 12.8-15.3mm, 15.3-18.5mm, 17.8-21.0mm, 20.3-23.5mm, total 8 common sizes..
  • 【Material】High precision single ear hose clamps made of 304 stainless steel, Corrosion-Resistant , will not rust for long-term use..
  • 【Edge Polished Smooth】Cochlear design ensures continuous clamping during temperature changes or machine vibrations, edge polished smooth, avoid damage to the hose..
  • 【Design】There is no protrusion and gap in the inner, narrowband design providing a more concentrated sealing pressure..
  • 【Wide Applications】Hose clamps used to seal various types of hoses, pincers can increase clamp force, designed for repairing pipes & plumbing systems. Widely used in securing hoses, pipe, cable, tube, fuel lines etc. Perfect for automotive, industrial, boat/marine, shield, household etc. both indoor and outdoor..
Check Stock

HELIFOUNER 40 Pieces 15.3-18.5mm 304 Stainless Steel Single Ear Hose Clamps

  • 【Sizes】15.3-18.5mm single ear hose clamps, total 40 pieces 15.3-18.5mm commonly used stainless steel ear clamps, enough quantities can satisfy your long time using..
  • 【Material】High precision single ear hose clamps made of 304 stainless steel, which have good corrosion resistance in bad environment. They have superior rust resistance and excellent oxidation resistance, which can ensure long time using..
  • 【Edge Polished Smooth】Cochlear design ensures continuous clamping during temperature changes or machine vibrations, edge polished smooth, avoid damage to the hose..
  • 【Design】There is no protrusion and gap in the inner, narrowband design providing a more concentrated sealing pressure..
  • 【Wide Applications】Hose clamps used to seal various types of hoses, pincers can increase clamp force, designed for repairing pipes & plumbing systems. Widely used in securing hoses, pipe, cable, tube, fuel lines etc. Perfect for automotive, industrial, boat/marine, shield, household etc. both indoor and outdoor..
Check Stock

DERNORD 20 Pack Hose Clamps 304 Stainless Steel Adjustable Pipe Tube Clamps, Worm Gear Hose Clamps for Plumbing, Automotive And Mechanical Applications (6-12mm)

  • Durable Quality- The whole hose clamp (including the band, housing and screw) are all made of premium stainless steel material. Salt resistant, anti rust, anti-corrosion, waterproof, oil-proof. Clamps are sturdy, strong and reliable..
  • WIide Adjustable Size Range- Clamps are flexible and ductile with wide adjustable size range from 6-12mm/0.24-0.47 inches. Fit for hose outside diameter 6-12mm.
  • Powerful Function – Smooth surface, torsion-resistant and pressure-resistant, tightly locked and large adjustment range.Adjust the diameter to precisely apply sealing pressure. It attaches hoses for fitting hoses in confined spaces to prevent flow leakage..
  • Reusable – These clamps also can be recycled and reused due to the 304 stainless steel material which makes them worked last for long.
  • Widely Used- Clamps are used in securing hoses, pipe, cable, tube, fuel lines etc. Perfect to apply in automotive, industrial, boat/marine, shield, household etc. both indoor or outdoor..
Check Stock

NEXADD Fuel Line Pliers Set 4Pcs | Hose Remover Pliers | 9 Inch Fuel Filter Caliper | Hose Pipe Clamp Clip | 80 Degree Disconnect Pliers Set for Auto Maintenance with Storage Case

  • ..., a hose pipe clamp clip and 80 degree disconnect pliers . You’ll save about 30 percent when you buy NexADD fuel line pliers combo kits instead of buying each tool . Just Add to Cart!.
  • Hose Remover Pliers★-The best tool for removing hose clamps for fuel and small water hoses.To remove hoses from transmission,rubber hoses connect to cooler lines. Even if can't fit both sides (hose/tube)between fitting and hose.Slide one side in and work hose out then get both sides in, give handles a squeeze and Voila" off comes hose.Hose remover pliers easily remove stubborn hoses on tanks, radiators, pumps, air cleaners,etc.Remove fuel vacuum or heater hoses from 5/32”to 1/2”(4mm to 14mm)..
  • Fuel Line Clip Removal Pliers ★-The fuel line clip removal pliers suitable for removal and replacement of connections on fuel filter lines (petrol & diesel).Required when removing and replacing fuel filters.Upgarded maximum opening approx: 9.3CM/3.66IN.NexADD fuel line clip removal tool suitable for use in large space.Fuel line hose clamp pliers designed to compress the quick disconnect lugs without damaging connector.Suitable for VW, Audi, Fiat, GM,Vauxhall,Mercedes....
Check Stock

Fuel Transfer Hose, Fuel Hose 3/4\ x 20' (6 m), 3/4 Fuel Hose 20 ft, Fuel Pump Hose 3/4 Inch, for Dispensing Diesel Fuel, Gasoline, Grease, Kerosene, Petroleum Oils - 3/4 Transfer Hose,Farm Fuel Hose

  • 3/4" x 20' (6 m) Fuel Transfer Hose, 3/4 Fuel Hose, Fuel Transfer Pump Replacement Hose. Designed for use with all electric fuel transfer pumps..
  • Farm fuel transfer hose For Dispensing diesel fuel, gasoline, grease, kerosene and petroleum oils..
  • One end of thread is 3/4 In. NPT, the other end is 1-inch NPT. Length 20 ft..
  • This Fuel Transfer Hose 3/4 inch may also know as fuel transfer hose 1 inch,1 inch fuel hose 20 feet, Fuel pump hose,Farm Tank Fuel hose,3/4 Fuel Hose 20 ft,Fuel transfer hose,3 4 Fuel hose,Fuel transfer pump hose,Gas pump hose,Gas transfer hose,Transfer tank hose,Diesel tank hose,Pump hoses,Gasoline pump hose,Farm fuel hose,Diesel transfer hose,Fuel hoses,Diesel fuel line hose,Fuel fill hose,Fill hoses,Oil transfer hose,3/4 Fuel hose,Fuel hose 3/4, 3/4 Fuel transfer hose, 3/4 Hose..
Check Stock

DURATECH 6pcs Hose Clamp Pliers, Pinch Pliers, Line Clamp Pliers Set for Flexible Hoses Fuel Hoses Gas Lines Brake Hoses Radiator Hoses

  • 3 Different Sizes: This set comes with 6 red color fuel line clamps in 3 different sizes. Small 1/8-in to 5/16-in, Medium 1/2-in to 3/4-in, Large 3/4-in to 2-1/4-in..
  • Insulation Material: Our Line Clamps are made of PA6. Heat resistant reinforced nylon construction, non-conductive to ensure security. And with liquids like fuel, these help keep you safe!.
  • Wide Application: These hose clamp pliers are great for use on flexible hoses, such as brake hoses, fuel hoses, gas lines, coolant hoses, radiator hoses, lawnmower fuel gas lines and more. NOT for use on hard, reinforced, or high pressure lines..
  • Anti-Slip Handle&Safety Buckle: The grips of clamp pliers are anti-slip and provide extra comfort, easy control to reduce hand fatigue. With security card buckle, these pliers can lock into position leaving your hands free to repair..
  • Make Repairs Easier: Using hose clamp pliers helps keep the mess to a minimum. Our plastic clamp pliers close off flexible hoses while leaving them undamaged. The smooth, Special-radius jaws and rounded jaw edges can effectively prevent damage to internal hose reinforcement..
Check Stock

attwood 9300FDV7 Universal Fuel Demand Valve for 3/8-Inch and 5/16-Inch Fuel Hoses

  • High-strength composite material stands up to the harshest marine environments.
  • Low vacuum restriction ensures proper engine functioning at start-up and during operation.
  • compatible with 3/8 inch and 5/16 inch fuel hoses and Ethanol blended fuels.
  • Compatible with all original equipment manufacturer (OEM) brands.
  • Attwood products are both compatible and reliable, engineered and built with a never-fail attitude.
Check Stock

WTMORE Boat Fuel Tank 3 Gallon 12L, Marine Outboard Motor Fuel Tank w/Connector, Compatible with Kayaks, Small/Large Boats, Inflatables and Canoes- Red

  • Built to Last- This boat fuel tank is made of high density polyethylene, low permeability, anti-aging, impact resistance, won't rust, crack or chip, it can naturally rebound without permanent deformation after encountering an impact..
  • Fuel Up With Ease- Marine portable fuel tank 3 gallon (12 litre) includes 1 pcs fuel line and 1 pcs primer bulb, the fuel hose comes with snap-on connectors to allow quick attachment and removal of boat fuel tank and outboard engine, fuel up with ease. It's perfect for small to large boats, inflatables, canoes and even kayaks..
  • Scientific Design- I-shaped lifting handle design is more ergonomic. It's light weight compact, easy to carry, easy to stow, durable and strong. The outboard boat motor fuel tank cap has two function, Sealing and Venting. In addition there are separate air inlet and oil outlet, design for prevent oil from spilling..
  • With Filter- A filter is built into the air inlet of the portable marine fuel tank to ensure clean fuel. Marine outboard motor fuel tank features a fine mesh input spout so you can fill this portable marine fuel tank without worrying about gunk and grime getting in the gasoline..
  • With Fuel Gauge- Marine fuel tank provides a high contrast fuel gauge to accurately monitor the level of remai....
Check Stock