Reviews Marine Flotation Foam

FIBERGLASS WAREHOUSE Pour Foam 2 lb Closed Cell 2-Part Expanding Polyurethane Boat Floatation Coast Guard Approved (2 Gallon)

  • 2 lb Density Marine-Grade expanding foam: Closed cell foam, perfect for flotation, insulation, soundproofing, or filling voids. This pour foam is U.S. Cost Guard approved and is ideal for use in dock floats and boat parts..
  • Easy mixing and handling: 2-part liquid resin component system with a 1:1 Mix Ratio to produce the expanding polyurethane foam. Starts foaming after 45 seconds of mixing, and 7 minutes to full expansion. Build multiple layers by pouring the mix in separate batches to form strong bonds between layers..
  • 94% Rigid Closed-Cell Foam: Once the foam is cured, it helps prevent moisture absorption and won’t be affected by solvents, oil or gas. The cured foam can be cut to any desired shape or be coated with polyester, epoxy, or vinyl ester resins..
  • High-Quality polyurethane foam: This waterproof foam sealant will have a buoyancy of approximately 300 pounds per gallon foot, and a density of 2.0 lbs/ft3. This product does not contain any CFC blowing agents..
  • Package content: Our Fiberglass Warehouse 2-part Pour Foam includes 1 gallon of each component for a total of 2 gallons. It is a two liquid resin component system that produces foam when mixing part A and B together..
Check Stock

TotalBoat Flotation Foam - 2 Part Expanding Polyurethane Marine Pour Foam for Boat Floatation, Insulation and Soundproofing (2 LB Density, 2 Gallon Kit)

  • after mixing, the foam expands rapidly and becomes rigid, so clean the surface in advance and be ready to pour.
  • AVAILABLE IN A 2 QUART KIT AND A 2 GALLON KIT.
  • Flotation Range for 2lb foam: 75 lbs per mixed 2 quart kit, and 300 lbs per mixed 2 gallon kit.
  • shelf life is 6 months from date of manufacture.
Check Stock

Marine Coat One Polyurethane Pour Foam Kit, 5lb Density, 2 Part Pour Foam System for Boat Insulation, Soundproofing, and Flotation (2 Gallon Kit)

  • Flotation Foam is a polyurethane 2 part foam that, when mixed in equal parts and poured in place this foam will soundproof, insulate, or provide extra buoyancy..
  • This expandable foam is recommended for void filling in nonstructural applications. It can be poured underneath decks and inside cavities where a lightweight flotation foam is needed to provide buoyancy..
  • 2# Density polyurethane flotation Foam Quart Kit.
  • Consists of 1 pint of Part A and 1 pint of Part B and produces 1.25 cubic feet..
  • Once fully cured this foam can be laminated over with any type of polyester, epoxy or vinyl ester resin without melting..
  • All expansion rates and times given are temperature critical. Temperatures below 75° F will lower the expansion rate therefore requiring more foam. Ideal working temperature is 75° to 80° F or above. Accurate measuring of these products is extremely critical. Working time before foaming: approx. 45 seconds Time before full expansion: approx. 5 minutes.
Check Stock

True Composites 2 Part Urethane Pour Foam, 2 Lb Density, Marine Foam for Boat Flotation, Sound Proofing, Foam Insulation, Post Hole Foam, 1 Gallon Kit

  • Flotation Foam is a polyurethane 2 part foam that, when mixed in equal parts and poured in place this foam will soundproof, insulate, or provide extra buoyancy..
  • This expandable foam is recommended for void filling in nonstructural applications. It can be poured underneath decks and inside cavities where a lightweight flotation foam is needed to provide buoyancy..
  • 2# Density polyurethane flotation Foam 2 Gallon Kit.
  • Consists of 1 gallon of Part A and 1 gallon of Part B and produces 10 cubic feet..
  • Once fully cured this foam can be laminated over with any type of polyester, epoxy or vinyl ester resin without melting..
  • All expansion rates and times given are temperature critical. Temperatures below 75° F will lower the expansion rate therefore requiring more foam. Ideal working temperature is 75° to 80° F or above. Accurate measuring of these products is extremely critical. Working time before foaming: approx. 45 seconds Time before full expansion: approx. 5 minutes.
Check Stock

2 Lb Density Expanding Pour Foam, 2 Part Polyurethane Closed Cell Liquid Foam for Boat and Dock Flotation, Soundproofing, Filling Voids, and Insulation (2 Gallon Kit)

  • Flotation Foam is a polyurethane 2 part foam that, when mixed in equal parts and poured in place this foam will soundproof, insulate, or provide extra buoyancy..
  • This expandable foam is recommended for void filling in nonstructural applications. It can be poured underneath decks and inside cavities where a lightweight flotation foam is needed to provide buoyancy..
  • 2# Density polyurethane flotation Foam 2 Gallon Kit.
  • Consists of 1 gallon of Part A and 1 gallon of Part B and produces 10 cubic feet..
  • Once fully cured this foam can be laminated over with any type of polyester, epoxy or vinyl ester resin without melting..
  • All expansion rates and times given are temperature critical. Temperatures below 75° F will lower the expansion rate therefore requiring more foam. Ideal working temperature is 75° to 80° F or above. Accurate measuring of these products is extremely critical. Working time before foaming: approx. 45 seconds Time before full expansion: approx. 5 minutes.
Check Stock

2 Lb Density Expanding Pour Foam, 2 Part Polyurethane Closed Cell Liquid Foam for Boat and Dock Flotation, Soundproofing, Filling Voids, and Insulation (1 Gallon Kit)

  • Flotation Foam is a polyurethane 2-part foam that, when mixed in equal parts and poured in place this foam will soundproof, insulate, or provide extra buoyancy..
  • This expandable foam is recommended for void filling in nonstructural applications. It can be poured underneath decks and inside cavities where a lightweight flotation foam is needed to provide buoyancy..
  • 2# Density polyurethane flotation Foam 1 Gallon Kit.
  • Consists of 1/2 gallon of Part A and 1/2 gallon of Part B and produces 5 cubic feet..
  • Once fully cured this foam can be laminated over with any type of polyester, epoxy or vinyl ester resin without melting..
  • All expansion rates and times given are temperature critical. Temperatures below 75° F will lower the expansion rate therefore requiring more foam. Ideal working temperature is 75° to 80° F or above. Accurate measuring of these products is extremely critical. Working time before foaming: approx. 45 seconds Time before full expansion: approx. 5 minutes.
Check Stock

AWF PRO Sikaflex 1a Kit - One Component, Flexible, Non Sag, Polyurethane Concrete and Masonry Sealant for Vertical and Horizontal Surfaces, Sikaflex 1a 10 oz Limestone (12), AWF 2000 Caulk Gun (1)

  • Flotation Foam is a polyurethane 2 part foam that, when mixed in equal parts and poured in place this foam will soundproof, insulate, or provide extra buoyancy..
  • This expandable foam is recommended for void filling in nonstructural applications. It can be poured underneath decks and inside cavities where a lightweight flotation foam is needed to provide buoyancy..
  • 2# Density polyurethane flotation Foam Quart Kit.
  • Consists of 1 pint of Part A and 1 pint of Part B and produces 1.25 cubic feet..
  • Once fully cured this foam can be laminated over with any type of polyester, epoxy or vinyl ester resin without melting..
  • All expansion rates and times given are temperature critical. Temperatures below 75° F will lower the expansion rate therefore requiring more foam. Ideal working temperature is 75° to 80° F or above. Accurate measuring of these products is extremely critical. Working time before foaming: approx. 45 seconds Time before full expansion: approx. 5 minutes.
Check Stock

STEARNS Utility Flotation Cushion Blue 16- Inch x 14-3/8- Inch

  • Utility cushion doubles as a comfortable place to sit and as a flotation cushion.
  • US Coast Guard-approved Type IV flotation device.
  • Soft polyester shell and durable Crosstech flotation foam.
  • Strong 1-inch webbed straps make it easy to hold onto and aid in rescue.
Check Stock

GREENWISH Swim Belt Child for Kids 50-90lbs, Bouyancy Belt for Children Perfect for 5-12years Old Kids Swim Beginner

  • ...st float around. Swim belt to make you learn better.
  • HIGH DENSITY EVA FOAM: EVA environmentally friendly materials, high foam processing technology. Thicker buoyancy. Made of High-density Eva Foam which will durable and not absorb water and give more balance and sufficient flotation.
  • ADJUSTABLE BELT: The belt is adjustable according to your waistline, which fits most children.
  • The swimming belt is suitable for swimmers below 90LB.
  • REMOVEABLE BLOCK: You can remove some foam blocks when your kids get stronger and more confident.
  • As with any exercise flotation device, make sure to adjust the belt snugly so it doesn't move upward as you exercise.
  • WARMING TIPS: The flotation device for kids is mainly used to help beginners learn swimming instead of a life-saving product.
Check Stock

Stearns Adult Classic Series Vest, 3000004475, Blue, Universal

  • US coast guard-approved adult life jacket.
  • Soft polyester shell and durable Crosstech flotation foam.
  • Open-sided design and 3 adjustable buckles for breathability.
  • Designed for adults weighing 90 pounds or more.
  • For use on a boat, a personal watercraft or for tow sports.
  • Two adjustable straps and open sides for better fit.
  • Durable construction: Nylon shell, Crosstech Flotation Foam, 2 - 1 inch webbed straps.
Check Stock