Reviews Marine Epoxy Paint For Wood

TotalBoat-487750 Clear Penetrating Epoxy Wood Sealer Stabilizer for Rot Repair and Restoration (Gallon, Cold Weather)

  • WOOD HARDENER FOR ROTTED WOOD: two-part epoxy system seals, hardens, preserves, and protects all types of wood by stopping rot. Makes finishes like paint and varnish stick better and last longer. Easy to use treatment has no VOCs or harsh fumes.
  • PENETRATING WOOD SEALER: An ideal dry rot treatment.
  • this marine-grade epoxy resin is perfect for wooden boat restoration, wood repairs, and woodworking projects. Seal bare or new wood to protect against damage.
  • CLEAR LOW VISCOSITY RESIN WITH MANY USES: Use on all softwoods, including cedar, cypress, fir, pine and redwood. Use on all hardwoods, including ipe, mahogany, maple, oak, and teak. Use on butcher block, live edge slabs, particle board, plywood, and OSB.
  • WOOD ROT REPAIR EPOXY AVAILABLE IN TWO FORMULAS: Choose regular formula Penetrating Epoxy for 65-90 degrees F temps.
  • Choose Cold Weather Penetrating Epoxy for 40-65 degrees F temps (Do not use Cold Weather formula above 65 F).
  • CHOOSE THE RIGHT EPOXY KIT SIZE FOR YOUR PROJECT: Both formulas are available in Pint, Quart, Half-Gallon, and Gallon sizes. Simple 2 parts resin to 1 part hardener mix ratio for reliable results every time. Easy cleanup with soap and water.
Check Stock

TotalBoat-492063 Clear Penetrating Epoxy Wood Sealer Stabilizer for Rot Repair and Restoration (Pint, Cold Weather)

  • WOOD HARDENER FOR ROTTED WOOD: two-part epoxy system seals, hardens, preserves, and protects all types of wood by stopping rot. Makes finishes like paint and varnish stick better and last longer. Easy to use treatment has no VOCs or harsh fumes.
  • PENETRATING WOOD SEALER: An ideal dry rot treatment.
  • this marine-grade epoxy resin is perfect for wooden boat restoration, wood repairs, and woodworking projects. Seal bare or new wood to protect against damage.
  • CLEAR LOW VISCOSITY RESIN WITH MANY USES: Use on all softwoods, including cedar, cypress, fir, pine and redwood. Use on all hardwoods, including ipe, mahogany, maple, oak, and teak. Use on butcher block, live edge slabs, particle board, plywood, and OSB.
  • WOOD ROT REPAIR EPOXY AVAILABLE IN TWO FORMULAS: Choose regular formula Penetrating Epoxy for 65-90 degrees F temps.
  • Choose Cold Weather Penetrating Epoxy for 40-65 degrees F temps (Do not use Cold Weather formula above 65 F).
  • CHOOSE THE RIGHT EPOXY KIT SIZE FOR YOUR PROJECT: Both formulas are available in Pint, Quart, Half-Gallon, and Gallon sizes. Simple 2 parts resin to 1 part hardener mix ratio for reliable results every time. Easy cleanup with soap and water.
Check Stock

TotalBoat Clear Penetrating Epoxy Wood Sealer Stabilizer for Rot Repair and Restoration (Half-Gallon, Traditional)

  • WOOD HARDENER FOR ROTTED WOOD: two-part epoxy system seals, hardens, preserves, and protects all types of wood by stopping rot. Makes finishes like paint and varnish stick better and last longer. Easy to use treatment has no VOCs or harsh fumes.
  • PENETRATING WOOD SEALER: An ideal dry rot treatment.
  • this marine-grade epoxy resin is perfect for wooden boat restoration, wood repairs, and woodworking projects. Seal bare or new wood to protect against damage.
  • CLEAR LOW VISCOSITY RESIN WITH MANY USES: Use on all softwoods, including cedar, cypress, fir, pine and redwood. Use on all hardwoods, including ipe, mahogany, maple, oak, and teak. Use on butcher block, live edge slabs, particle board, plywood, and OSB.
  • WOOD ROT REPAIR EPOXY AVAILABLE IN TWO FORMULAS: Choose regular formula Penetrating Epoxy for 65-90 degrees F temps.
  • Choose Cold Weather Penetrating Epoxy for 40-65 degrees F temps (Do not use Cold Weather formula above 65 F).
  • CHOOSE THE RIGHT EPOXY KIT SIZE FOR YOUR PROJECT: Both formulas are available in Pint, Quart, Half-Gallon, and Gallon sizes. Simple 2 parts resin to 1 part hardener mix ratio for reliable results every time. Easy cleanup with soap and water.
Check Stock

TotalBoat Clear Penetrating Epoxy Wood Sealer Stabilizer for Rot Repair and Restoration (Half-Gallon, Cold Weather)

  • WOOD HARDENER FOR ROTTED WOOD: two-part epoxy system seals, hardens, preserves, and protects all types of wood by stopping rot. Makes finishes like paint and varnish stick better and last longer. Easy to use treatment has no VOCs or harsh fumes.
  • PENETRATING WOOD SEALER: An ideal dry rot treatment.
  • this marine-grade epoxy resin is perfect for wooden boat restoration, wood repairs, and woodworking projects. Seal bare or new wood to protect against damage.
  • CLEAR LOW VISCOSITY RESIN WITH MANY USES: Use on all softwoods, including cedar, cypress, fir, pine and redwood. Use on all hardwoods, including ipe, mahogany, maple, oak, and teak. Use on butcher block, live edge slabs, particle board, plywood, and OSB.
  • WOOD ROT REPAIR EPOXY AVAILABLE IN TWO FORMULAS: Choose regular formula Penetrating Epoxy for 65-90 degrees F temps.
  • Choose Cold Weather Penetrating Epoxy for 40-65 degrees F temps (Do not use Cold Weather formula above 65 F).
  • CHOOSE THE RIGHT EPOXY KIT SIZE FOR YOUR PROJECT: Both formulas are available in Pint, Quart, Half-Gallon, and Gallon sizes. Simple 2 parts resin to 1 part hardener mix ratio for reliable results every time. Easy cleanup with soap and water.
Check Stock

TotalBoat Marine Topside Boat Paint Primer for Fiberglass and Wood (Gray, Quart)

  • ONE-PART MARINE PRIMER FOR BOATS provides a durable, flexible undercoat for 1-part and 2-part polyurethane and enamel marine topside paint.
  • for use above the waterline on fiberglass, wood, gelcoat and previously painted surfaces in good condition.
  • COVERS COMPLETELY IN JUST ONE COAT: High-solids primer seals the surface with 1 thin coat.
  • apply a second coat only if a higher build is needed.
  • to fill large surface imperfections use TotalBoat TotalFair epoxy fairing compound before applying Topside Primer.
  • EASY TO APPLY BY BRUSHING, ROLLING OR SPRAYING: Use a natural bristle paint brush, a 1/8 " solvent-safe foam roller, or to spray, use a 1.1mm tip.
  • boat primer is chromate-free and lead-free.
  • DRIES FAST, CURES TO A SMOOTH, HARD FINISH: Ready to sand in 60-90 minutes at 65°F.
  • marine paint primer is easy to sand, then just wipe clean and apply a topside finish such as TotalBoat Wet Edge or TotalTread marine non-skid deck paint.
  • AVAILABLE IN WHITE AND GRAY IN QUART AND GALLON SIZES. Brush/roller application - thin with TotalBoat Special Brushing Thinner 100.
  • do not apply Topside Primer thicker than recommended or it may not cure properly.
Check Stock

Louie's Backyard Cookbook: Irrisistible Island Dishes and the Best Ocean View in Key West (Roadfood Cookbook)

  • ONE-PART MARINE PRIMER FOR BOATS provides a durable, flexible undercoat for 1-part and 2-part polyurethane and enamel marine topside paint.
  • for use above the waterline on fiberglass, wood, gelcoat and previously painted surfaces in good condition.
  • COVERS COMPLETELY IN JUST ONE COAT: High-solids primer seals the surface with 1 thin coat.
  • apply a second coat only if a higher build is needed.
  • to fill large surface imperfections use TotalBoat TotalFair epoxy fairing compound before applying Topside Primer.
  • EASY TO APPLY BY BRUSHING, ROLLING OR SPRAYING: Use a natural bristle paint brush, a 1/8 " solvent-safe foam roller, or to spray, use a 1.1mm tip.
  • boat primer is chromate-free and lead-free.
  • DRIES FAST, CURES TO A SMOOTH, HARD FINISH: Ready to sand in 60-90 minutes at 65°F.
  • marine paint primer is easy to sand, then just wipe clean and apply a topside finish such as TotalBoat Wet Edge or TotalTread marine non-skid deck paint.
  • AVAILABLE IN WHITE AND GRAY IN QUART AND GALLON SIZES. Brush/roller application - thin with TotalBoat Special Brushing Thinner 100.
  • do not apply Topside Primer thicker than recommended or it may not cure properly.
Check Stock

Lemon Strip Paint Stripper - Professional Strength Remover - Semi-Paste - 32 Ounce

  • MULTI-PURPOSE STRIPPER - Semi-Paste formula strips paint, varnish, lacquer, and epoxy. For use on wood, metal, masonry, and marine surfaces..
  • PROFESSIONAL STRENGTH FORMULA - Strips multiple layers and begins removing paint in as little as five minutes. Multiple coats of finish may require an overnight application..
  • CLINGS TO VERTICAL SURFACES - Perfect for stripping surface coatings from the toughest project..
  • DOES NOT CONTAIN METHYLENE CHLORIDE or NMP - No harsh fumes and easy to use..
  • COVERAGE AREA - One quart covers 25 square feet..
Check Stock

AQUASEAL Table Top Epoxy Resin Epoxy - Bar Top Epoxy Clear Epoxy Resin Countertop Epoxy Marine Epoxy Resin Epoxy Countertop Kit Epoxy Kit 2 Gallon 2 Part Epoxy Resin Clear Adhesive Primer

  • Premium epoxy kit - Aquaseal epoxy resin and hardener kit delivers extra durable results ideal for boat building, composite construction, house....
  • All you need included - Aquaseal marine epoxy resin kit includes resin 1 gallon bottle, hardener 1 gallon bottle , 2x measuring cups, 2x plastic....
  • Easy to use - Mix 1 part epoxy resin and 1 part hardener for 20 minutes of work time on your marine epoxy projects. Use on wood, fiberglass,....
  • Faster curing and harder - Strong, clear epoxy resin, fully UV-resistant cures faster and harder, ideal durability for boat repair, table top epoxy....
  • Customer service - Please read the instructions provided with the Aquaseal marine epoxy before use. If you have any questions or issues, please....
Check Stock

Sunnyside 63532 2-Minute Remover Advanced Paint & Varnish Remover Liquid Quart

  • New, safer formula is methylene chloride free.
  • Fast acting liquid remover designed to remove multiple layers of finish in just one application.
  • Use for detailed stripping on wood, metal, masonry, marine and automotive finishes.
  • Will remove latex and oil based paint, lacquer, shellac, varnish, epoxy and polyurethane finishes.
Check Stock

TotalBoat Clear Penetrating Epoxy Wood Sealer Stabilizer for Rot Repair and Restoration Quart Traditional

  • WOOD HARDENER FOR ROTTED WOOD: two-part epoxy system seals, hardens, preserves, and protects all types of wood by stopping rot. Makes finishes like....
  • PENETRATING WOOD SEALER: An ideal dry rot treatment.
  • this marine-grade epoxy resin is perfect for wooden boat restoration, wood repairs, and....
  • CLEAR LOW VISCOSITY RESIN WITH MANY USES: Use on all softwoods, including cedar, cypress, fir, pine and redwood. Use on all hardwoods, including ipe,....
  • WOOD ROT REPAIR EPOXY AVAILABLE IN TWO FORMULAS: Choose regular formula Penetrating Epoxy for 65-90 degrees F temps.
  • CHOOSE THE RIGHT EPOXY KIT SIZE FOR YOUR PROJECT: Both formulas are available in Pint, Quart, Half-Gallon, and Gallon sizes. Simple 2 parts resin to 1....
Check Stock